PoE Over Coax Converter | POE-IPC-6001A-KIT

Sdílet
Vložit
  • čas přidán 27. 06. 2024
  • Why recable? By using the existing cabling already in place, we can make quoting & installing a job much simpler and produce the same result.
    Today we take a look at the POE-IPC-6001A-KIT PoE Over Coax Converter and see how it can best serve your needs.
    Start/Overview 00:00
    Unboxing 02:06
    Coax vs Ethernet Comparison 04:46
    Camera Housing 08:17
    POE-IPC-6001A-KIT Product Page:
    bit.ly/3BLeutQ
    Follow Us:
    Facebook: bit.ly/3kSQLRE
    Instagram: bit.ly/3DNe6Nw
  • Věda a technologie

Komentáře • 16

  • @Nenea2a
    @Nenea2a Před 2 lety +1

    Beautiful presentation.
    Please tell me if you know a device that can convert a signal from an analog camera to an IP signal so that it can be viewed directly on a computer or an NVR?
    Thank you.

    • @EQLNetworksSecurity
      @EQLNetworksSecurity  Před 2 lety

      Thanks Nenea. Yes there but will probably be more cost effective to use a converter and change the camera to IP to get a better camera.

  • @sobedelicious9445
    @sobedelicious9445 Před 3 lety +1

    hello, I have a my router, and modem all upstairs in this cabinet in the laundry room in the new Lennar homes. however I am trying to wire PoE cameras and do not want to run wires all the way upstairs. I do have a coax cable port downstairs in the office. am I able to use this device to convert that coax port into an ethernet port that way I can connect my NVR system to the ethernet over coax and then my cameras to the NVR? thank you so much for making these videos.

    • @EQLNetworksSecurity
      @EQLNetworksSecurity  Před 3 lety +1

      No problem and Thank you! Yes that is correct, you will be able to use that cable as backbone/link back to your router.

  • @xXxDaRkOlImxXx
    @xXxDaRkOlImxXx Před 3 lety

    what about the quality of the camera resolution after the coaxial?

  • @theroddas1116
    @theroddas1116 Před rokem

    I assume you can’t get these POE over coax converters without requiring a power supply ?

  • @luisjuarez1200
    @luisjuarez1200 Před rokem

    I have internet router downstairs. I would like to have 1 poe network switch downstairs connected to 3 poe cameras downstairs . Upstairs NVR to 4 poe cameras upstairs. What and how many devices do I need to use my home existing coax cable from downstairs to upstairs to connect all poe cameras downstairs and upstairs to NVR upstairs.

  • @gnavitas1
    @gnavitas1 Před 3 lety

    can i use it on internet?

    • @EQLNetworksSecurity
      @EQLNetworksSecurity  Před 3 lety

      Yes you can use it on your local network, however you will be limited to 100Mbps. We do have other coax converters that allow 1GB.

  • @jamaicanpunch
    @jamaicanpunch Před rokem

    Is there a supplier in USA? Thanks

    • @EQLNetworksSecurity
      @EQLNetworksSecurity  Před rokem

      Where about are you located and I will see if there is someone there that can help.

  • @roberthypeofficial
    @roberthypeofficial Před 3 lety

    How much is the converter?

    • @EQLNetworksSecurity
      @EQLNetworksSecurity  Před 3 lety

      Hi please send an a request to sales@eql.com.au and we will be able to help you from there.

  • @scalamasterelectros3204

    Is this like a moca box