Making a LED worklight
Vložit
- čas přidán 11. 02. 2020
- I needed a small worklight for my milling machine. A bit longer video than normal, let me know what you think!
Learned a lot about milling during the making of this worklight. The inside looks pretty terrible because I did almost everything wrong :S next time it will be better :)
follow me on instagram or subscribe to see more :)
daniel_de_bruin - Zábava
Great video, not too long at all, very high production quality in your videos so keep it up. Also I will not tire of you snapping metal to size, never stop that.
haha I won't! Tanks for the nice words :)
It's amazing how you do all of this.
That looks fantastic!
Some comments though:
The purpose of the fins in a heatsink is to increase the surface area. The more area, the better the heat dissipation. So it would have been better to cut more grooves with a smaller tool.
And please, please, PLEASE, everybody on the internet, learn how thermal compound should be used!
For optimal thermal coupling you want to have no air between the mating surfaces, which is best achieved when they are as flat and smooth as can be.
Thermal compound is then used to fill any remaining surface imperfections. And that means you only use a very small amount and spread it as evenly as possible.
Bravo!! Great combination of craft + tasteful video editing. Loved the ending switch off bit, plus reusing your camera rail from previous video. Immediate subscribe! You make my CZcams experience worth it, and I look forward to your next piece!
I wish i had all those tools. Thats a clean made bruh! Keep it up 👍👍👍
you have a great set of tools there! and i like it! thanks for sharing ☺️👍
Dude your videos are amazing
Nice work and great product
glad i stumbled across your channel, great stuff
Amazing video!! I dont have any doubt that your subscribers numbers will soon start to raise exponentially if you continue with these quality content.
Awesome my dude 👍
I really enjoy your work👍
I know "a LED worklight" is the correct way to say it, but "an LED worklight" just sounds so much better...
Magnific...
Congratulations...
👏👏👏👏
Ponta grossa city, Brasil
Knipex pliers wrench. Best tool ever!! 😎
Wow, keep it up, I Will learner of You many techniques, i like what You do.
Hollywood is begging him to work on the next blockbuster film. Where the f___ did he come from? Incredibly clean work and stellar design. My brain would explode just planning the design or script. Damn!
Cool heat sink !
Un poco de todo!!❤️
1 Suggestion - Please put a picture of the completed project at the Beginning. I can't count the number of times I've had to skip to the end just to get an idea of what someone is making.
Putting a better picture of the completed project at the end would also improve your videos.Thanks
Or the state that it is in, so he doesn't give the end away fully
The poo sound effects 😂
Mooi gemaakt, werklamp ziet er heel goed uit moet ik zeggen 👍🏻
Gran bel lavoro... Complimenti
Excelente 😍
Flawless victory
Ik hou van je video's man, damn!
Hoi Daniel, nette video en mooi lampje. Even een tip voor het solderen. Op praktisch alle metalen zit een oxidatielaag die het moeilijk maken om soldeertin aan het metaal te hechten. De flux die in de soldeertin zit verwijdert deze oxidatie laag chemisch en maakt het oppervlak schoon wat de soldeer goed laat vloeien en makkelijk laat hechten aan de metalen. Echter wanneer je de soldeertin op je hete soldeerijzer doet om deze vloeibare soldeer daarna over te brengen naar je connectie is deze flux praktisch al verdampt en onwerkzaam. Dit maakt het solderen een stuk lastiger en de connecties over het algemeen een stuk onbetrouwbaarder. Het werkt vele male beter om de twee connectie punten bij elkaar te brengen, dan met de soldeerbout beide tegelijk op te warmen en dan vervolgens de soldeertin tegen het contactpunt van beide connectie punten houden. Hoop dat je er wat aan hebt.
Hey! Thanks! Daar ben ik mij zeker van bewust! alleen heb ik vaak geen 3 of 4 handen die dat mogelijk maken, en ik ben te gehaast om een helpende hand er bij te zetten. Dus ik smeer wat flux en doe het op deze manier. Af en toe mijn soldeerpunt vervangen is ook niet zo'n ramp. Zeker met de knikkerbanen is het bijna onmogelijk om het op de correcte manier te doen ;)
@@danielbruin ja, dat is vaak inderdaad het lastige. Zelf gebruik ik in dat sort gevallen toch maar even een helpend handje. Ken je BigCliveDotCom? Die is bijzonder handig in het bij elkaar houden van meerdere componenten, de soldeer en de soldeerbout. Ik doe 't 'm niet na. Voor knikkerbanen of dergelijke is S-39 natuurlijk altijd het makkelijkste, maar dat is niet echt geschikt voor elektronica.
awesome !!
Actually, looks pretty good to me
Very nice
Amazing, can i copy that ? ^^
3:02
This is awesome! CNC used?
Loving your channel! what type of jumbo LED is that?
Surprisely easy looking project. How long it did take time?
NEAT.
Buen video gracias por el aporte, q utilizas de soporte para la lampara led
That heatsink is enough for that LED?
Genial
Esta chingon
@daniel de bruin hey, how on earth do you get all the motors and excess stuff from?
Nice video? Where did you bought LED?
0:03 what brand of marker/pen??
Super 😊👍
Do you happen to have a link to the LED you used?
Where can i find that led? What is the model?
I can't get past through the part where you drew the sharpie line and broke the piece by hands.
I like these the people who make everything. However if we all did this some companies would go bankrupt
This old Tony, cutting technique at beginning.
I need a milling machine.
No es bueno trabajar con anillo cuando usamos máquinas en movimiento! Saludos.
At 2:08 does anyone know what that tool is called?
Nice! Which cob led did you use?
Its a cool white 120x36mm ordered it a long time ago from uncle Ali
@@danielbruin Cool, I haven't found any high CRI COB LEDs out on the market.
@@MrNoipe bridgelux, luminous, cree, samsung, and yuji all make high cri cobs, and mid power arrays with high cri. As high a 98.
u need to get some silicon wire my dude. at 2:54 u can see the insulation squish. nothing wrong with that but it makes me sad inside
Was I the only one who thought this was about a working astroneer 'work light'?
Very Kool. But if you have the money to have all those tools. You can buy lights gone to bed. Trust me.
Me:yes I always wanted to make one with aluminium block.
*Sees huge machinery*
Never mind
You've been watching ToT just a bit to much me thinks...voor de rest best grappige poging.
Whats tot?
@@danielbruin This old Tony. :)
@@Flaggyt Ah! wel gezien ja! maar camera tructjes doe ik al m'n hele leven, niets nieuws :)
@@danielbruin tis geen schande om met ToT vergeleken te worden. :)
Парень конечно молодец, самостоятельно сделал настольный светильник. Но у кого дома есть фрезерный станок и лазерная резка, чтобы такое сделать? Честно говоря видео ни о чём, проще сходить купить за 5$ в магазине.
لطفا کانال منو هم سابسکرایب کنید من دوتا جمیل دارم جبران میکنم
Mejor compro una lámpara LEd en Home depot
Excelente 😍