Lathe Turning Tool Holder[1010] & inserts from banggood [unbox, review, testing inserts]
Vložit
- čas přidán 28. 08. 2024
- Hy There,
I got new lathe tools from banggood, in this video i'll try to show you how it look, test different insert on different materials, cut some thread, parting, cutting, milling and so on.
This video become way longer than i was think, so there you got some shortcut if you are only interested in a particular item.
00:26 unboxing
00:53 holders review
04:41 testing inserts that come with holders
06:46 testing Drillpro HRC45 Blue Nano inserts
08:52 testing MACHIFIT DCGT070204-AK H01 Aluminum Cutter Blade Carbide Insert
11:30 testing other holders & inserts
11:51 parting / cutting holder
13:32 testing threading tool
15:08 testing aluminium insert for milling head
You can buy these items here:
(this is my affiliate links, if you buy from that link you get cheaper, and I get a piece of cake)
7pcs 10mm Shank Lathe Turning Tool Holder Boring Bar with 7pcs VP15TF Carbide Inserts
www.banggood.c...
(use coupon code BGLATHE16 for extra 16% discount)
Drillpro 10pcs HRC45 Blue Nano DCMT070204 YBC251 Carbide Insert for SDJCR/SDNCN/SDQCR Turning Tool
www.banggood.c...
(use coupon code BGLATHE16 for extra 16% discount)
MACHIFIT 10pcs DCGT070204-AK H01 Aluminum Cutter Blade Carbide Insert Cutting Tool For CNC Turning Tools
www.banggood.c...
(use coupon code BGLATHE16 for extra 16% discount)
10pcs CCGT060204-AK H01 Inserts CNC Turning Tool Inserts Used for Aluminum
www.banggood.c...
(use coupon code BGLATHE16 for extra 16% discount)
10pcs APKT1604PDFR-MA3 H01 Carbide Inserts Used for Aluminum Copper
www.banggood.c...
(use coupon code BGLATHE16 for extra 16% discount)
2pcs ProsKit MS-035 Solder Flux Bottle With Fine Tipped Needle
www.banggood.c...
(use coupon code BGMS035 for extra discount)
Other videos about lathe cutting tool:
Making of: Small precize lathe tool out of broken drill bits [M4 internal thread cutting]
• Threading Turning Tool...
How to make carbide insert tool holder for cutting 45° edges lathe diy
• How to make carbide in...
thread cutting toll:
• Threading Turning Tool...
Thanks for watching.
Hope you enjoy in video and welcome to watch my other channel:
Tine Sedej:
/ @tinesedej8137
Foto, video & editing: Tine Sedej
Camera:
Sony A6500 [sel 18-200 f3,5-5,6 zeiss touit 50 2.8 macro]
Sony A6000 [sel 30 f3.5macro]
GoPro 7 Black
Music is from: YT audiolibrary
Beginnings - Unicorn Heads
*Excellent lathe **MyBest.Tools** I started turning pens, and this is a very smooth running lathe. I am glad that I went with a variable speed lathe. It is made of top quality materials and will probably out last me. I highly recommend.*
This camera angle is awesome! Your lathe looks huge! xD
Great review and footage - honest and nice to see close up shots showing the finish on the tools - thanks 👍🏻
Cool, no video is too long when is fun to watch
WOW! Impressive! Thank you for being patient, and making a very good and detailed video. Thank you :-)
New tools looks good enjoy it😉
10:44 i solved this anoying chip rain to my face, by building a small shield (~50*80mm) made out of transparent Polypropylene plastic sheet.
You can you any transparent foil or sheet you have (Polycarbonate from CD, or PETG from Bottles, or Acrylic Glass).
To hol the shield i used a 2mm copperwire and a bit of hotglue. Later i replaced the wire with a segmented flexible steel "pipe".
sweet, this helped me, just ordered the 7 piece set of 12mm holders!
Doesn't have to be slick and pretty as long as it does its job correctly. I bought a similar set from BG in 16mm. Good video.
thanks
Great review 👍 Thanks 😀
Yoiu motivated me to buy a small lathe similar to urs and start learning how to use!Did you learn everything ur self or someone taught you how to use the machine tools?? Love ur videos especially when using the lathe
Hello, also i buying new one but this time a bit bigger one size 550mm with some gears and automatic cross feed, i learning usinv it by myself but learning on big lathe at work, it's not hard, but there are many trick wich i still learning and i do some thing wrong but until i get what i want i don't see a problem 😁
Cool work 👍
Love your videos, thanks for sharing. What is the holder/insert you're using for the chamfers?
Thanks, this one is home made, check my video "how to mace carbide insert lathe tool" or something...
Čini se da ću mnogo naučiti putem tvojih videa mejaš 👌👍! Svakako lajk i suskrajb 😉 🍻
Hvala, samo da te opozorim, da jaz nimam specialnega znanja, po izobrazbi sem električar, sve ovo šta radim ovdje sam samouk, tako da puno stvari radim kako nebi smeo :)
@@TinC33 ma nemam ni ja 😉! Mislim. Završio sam skolu za tokara ali me to nije zanimalo. 20 g sam u prometu. Od 2015 se bavim rc modelarstvom i sad mi treba za djelove izrađivat pa moram obnovit znanje 😁
Ottima recensione per gli inserti, sicuramente anche il prezzo è molto vantaggioso, sarebbe bello sapere anche gli RPM di lavoro in base ai vari materiali. 👍👍😊
yes they'r really good for the price (with coupon about 7-8€ for pack of 10) about rpm, i got potentiometer for control rpm on my lathe, so it's very easy to set them during work and see where is the optimal cutting speed.
What zise is the tool holder ?
Thatone in the video is 10 by 10mm
13:35 its not the bigest thread but the bigest thread pitch
Shit i write a whole answer but then go i don't know where... so pitch is setted by the lathe (on my lathe is max pitch 1.75mm) for M10 pitch is 1.5mm.
I didn't cut major diameter piece but i turning to exactly 10mm this is wrong i know, so i must to cut 1,3mm deep to get nut on it.
For M10 i must to cutt Pitch x 0.866mm deep so 1,5x0,866=1,299mm deep but the 60° tooth out of insert is 1.3mm long so that's why i think M10-M12 is maximal dimension for METRIC thread.
But in that case the internal thread cutter is uselles for metric thread, because M12-M14 is the smallest thread it can be cutted with that holder, but for M12 we got pitch 1,75mm so we must cut (1,75x0,866)=1,5155mm deep, wich is more than the insert allow us.
Different story is on fine thread wich are also more common to cut on a lathe but anyway. i see the thread on my job dimension about 300mm and pitch got only about a mm or less, we just start screwing it wrong once (with a hand) and we must to repair the thread.
Heave a nice day.
WD40-works best on aluminum.
I think so, but still leave some oil behind, alcohol evaporate and leave no grease at all, i try once and use them since that day ;-)
Blazer syn 735
is any supllyer in qatar.
I wish Banggood would do something less scammy with there “view orders” page. Why when you go there, it try’s to get you to pay for something you already paid for. I almost don’t want to orders from them, they know what they are doing, they are trying to trick you to paying twice
Really? Didn't botice that, i also buy lot from banggood (not via aff program but as basic customer) and got really good experience, sometime need to wait few days to dispatch, and that's all.
TinC33 it’s the app, the only way to actually explain, is to see it. I still buy, some things are just to cheap not too. I recently put an order in after watching steve jordon ( you guys actually make a difference in my buying decisions) I get a tracking number, but USPS has nothing to report, I’m hoping it’s a in between country problem, since this is my first order with them post COVID, I was wondering about shipping times
@@mitchcumstein9808 i never use app for buying, i only trust stationaty pc, don't know why but always make orders and other money stuff on pc.
If they ship already don't worrie, you will reaceived tracking number from usps in 7-10 days, when the item arrive to us land, that's how it work for europe but it's great because since they ship on that way there are no other charges because i reaceivd packet like it was ship from inside of EU so no tax to pay, i hope it work same for us.
TinC33 probably good idea, that’s exactly what I’ll do from now on
sure be nice if you could understand this guy.............time to move on