Moser 31 Spline Axle Install on my 2007 GT500
Vložit
- čas přidán 1. 12. 2020
- Instagram @AllThingsBoost
Probably just should have gone Moser Axles to begin with. The fit and finish is top notch. Install was a breeze, now all that's left is to put them to the test at the drag strip. The axles I used in this video I ordered off of Summit Racing.
Link to axles: www.summitracing.com/parts/ms...
Studs: www.summitracing.com/parts/ms...
Lug Nuts:
www.summitracing.com/parts/mo... - Auta a dopravní prostředky
Killer project man! You are the most active, S197 GT500 build channel out there! Watching you tear this car apart has been a great learning experience. PS: (Boostaholic gets 🏁 for hooning 😂)
Thanks! Definitely a lot deeper into this car than I thought I'd be, but building it is almost just as fun as racing it! Appreciate the support!
Glad everything worked out. Good catch on the intercooler lol
I was low key freakin out when I saw how cold it got lol, I'm just glad nothing busted
Car looks killer, on the SVT rims!!
Nice videos! I love the great detail you go into with explaining everything and why your doing it. Couple easy questions. Why are you pulling the front swaybar? And what coolant are you running in your inner cooler?
Thanks!
So, pulling the front sway bar (from what I've read, because I havent tested it yet) helps with an even weight transfer. Partly because one side of the car will generally rise first, the sway bar's job is to keep front wheels even, so it starts fighting it on the launch. Hopefully with it out it will help keep the front stay up and weight back. Plus it's a few extra pounds off the front end.
Coolant is just ford Gold color. I swapped to water for the warm season so when I drain it I can just dump to the ground and fill it with ice, with coolant I need a catch pan or something to run ice.
@@AllThingsBoost Thanks for the explanation on the sway bar. Another CZcamser with an 08 races without one and I had always meant to ask figuring it couldn't be just weight.
How much was that ice tank and where did u get it from....also I'm looking for a drag pak
Link to the ice tank, looks to be on sale right now too. Drag pack is absolutely the way to go with these cars in my opinion.
www.cjponyparts.com/canton-supercharger-coolant-tank-aluminum-off-road-gt500-2007-2010/p/ROFT20/?gclid=Cj0KCQiAk53-BRD0ARIsAJuNhpv7ClaIn_TRqEdnyJLbfq2Pfrz5STXHZw-DK3t47CshmyJi66EKbE0aAtvoEALw_wcB
I thought the abs ring had to be a specific measurement from the “face” of the axle…sorry I’m about to do the same thing to my stang and want to make sure what I can n can’t do
As long as the sensor can pick up on the teeth it's fine. No issues with how I did mine
Hey quick question. @7:00 mark the axle shaft center bore doesnt protrude through the rotor center bore . is that normal?
On these axles it seems to be the case.
@@AllThingsBoost Have you had any issues with a noise or anything ? brakes feel off ?
@@akooner09 nope, had them on since this video with no issues. They've held up to plenty of launches and street driving
@@AllThingsBoost glad to hear. if the rotor face is flush with the axle center bore does that mean the rotor isnt sitting all the way back onto the axle shaft flange?
By chance could you have the link for the studs and the lug nuts as well?
Studs
www.summitracing.com/parts/msr-8010
Lug nuts
www.summitracing.com/parts/mor-46330