LaserPecker 4 engraving aluminum business cards start to finish by Benson Chik
Vložit
- čas přidán 6. 12. 2023
- Easy engraving with laserPecker 4, this is what the LP4 really good at.
“As an Amazon Associate I earn from qualifying purchases.”
(UK) amzn.to/46L3n3b LaserPecker 4
(US) amzn.to/46NBuYb
(UK) amzn.to/3RAXx0c 100Pcs black blank metal business cards
(US) amzn.to/3Tl1bMZ
Equipment I use for making videos:
Canon EOS R amzn.to/3uR9RLW
Canon EF-S 10-18mm amzn.to/3yhtf6I
Sony EZ-1 with Wide lens amzn.to/3kluLmn amzn.to/3XXp37G
IVISII 2 Pack 480 LED Video Light amzn.to/3tXGhDi
Saramonic Blink500 LAV mic amzn.to/3uQXbo8
JOBY JB01503-BWW GorillaPod amzn.to/3uRDf4t
Follow me on Instagram and Facebook / bensonchikphotography
/ bensonchikphotography
Use this link to sign up to Octopus and get £50 credit for your energy bill - share.octopus.energy/alive-be... - Zábava
Very good and detailed, Ive just started with these black cards and this video has been very helpful, thank you for sharing.
Would I be able to do this on a elegoo phecda with a .06 dot size?
Any laser can do this just do it to the best of your laser dot size by trying out the settings
@@BCreviews do you happen to have any videos on how to take a picture and set it up in lightburn to get this type of result?
No different to downloaded photo, resize it in lightburn and let the software generate dither image then invert burn onto the Ali cards
I am sure one of the video have my mug shot engraved onto the card 😅
@BCreviews oh ok that sounds like it won't be too hard to do thanks for answering my questions! Planning to pick up a laser engraver in the next month or so and these look amazing!
Какие параметры и намтроцки вы выбрали для нанесения изображения на бумажный конверт?
I think it was the default "paper" setting
Laser pecker software is terrible
Kinda agree with you on that one, I had LaserPecker 1 ,2 and now 4, hardware advance so much but app still lag behind
Can atomstack x20pro can do it too?
The best I can do with x20 pro will be around 400dpi which is a bit better than LP4 at 1k. The dot size of the x20 pro is bigger and will not show as much details. It can but not as good as
@@BCreviews what setup i should use speed power to engrave photo on black business card , jarvis or grayscale , Thanks
With my x20 pro I use imagr online free for edit then lightburn pass through
@@BCreviews yes but what setup in lightburn thanks