DIY Outdoor Fireplace TIMELAPSE Build

Sdílet
Vložit
  • čas přidán 22. 05. 2023
  • DIY build of an outdoor fireplace constructed with modern masonry techniques. Bricks were from a leftover project to cut down total cost. In total, there were about 250 man hours put into this project (mostly solo).

Komentáře • 29

  • @samuelberry4311
    @samuelberry4311 Před 5 měsíci +1

    That’s an amazing fire pit. Takes a lot of talent

  • @HectorRodriguez-fl5dm

    Great video! Looks amazing and well detailed planning.

  • @hjhjkhkhk553
    @hjhjkhkhk553 Před 11 měsíci +21

    This fire pit is one of a few covered pits that is on the list czcams.com/users/postUgkxAU9pOCSV9Y5JprooHvfxTpOrt4hx8uRM of approved products for Disney Fort Wilderness. The product served its purpose well and provided excellent fires throughout the evening. We were able to open the door and do s'mores, but I had to be careful because the handle was a bit hot on occasions. Additionally, I wish they had replaced some of the standard nuts with lock nuts in some places. We lost the door handle after just a couple of days of usage. Not a deal breaker, just a recommendation. I still give it 5 stars.

  • @TiSwAs73
    @TiSwAs73 Před 10 měsíci

    lovely fireplace - great video thanks

  • @vedaddurakovic6379
    @vedaddurakovic6379 Před rokem

    Nice work 👍

  • @cjtoota1
    @cjtoota1 Před 3 měsíci

    Amazing!!

  • @troycarpenter3675
    @troycarpenter3675 Před 6 měsíci

    FIRE!

  • @jasonchao5357
    @jasonchao5357 Před 7 měsíci +1

    Cinder blocks for quicker size up to form the over then stone for details

  • @darkgreen9098
    @darkgreen9098 Před měsícem

    Sweeter than pie!

  • @gilbertcervantes8655
    @gilbertcervantes8655 Před 4 měsíci

    Did you, if not could you, post a materials list? I saw leftover brick but I imagine the grout and brick are a type rated for heat?

  • @jmb9701
    @jmb9701 Před 3 měsíci

    Looks beautiful, but isn't this a huge fire hazard being directly adjacent to your house roof and a fence?

  • @rebecapimentel3050
    @rebecapimentel3050 Před 5 měsíci

    Was sand used to cover concrete posts then a little layer of dirt?

  • @nickweborg9485
    @nickweborg9485 Před rokem +2

    Hi, can you provide a link to any information about the fire box design, dimensions or building principles used during construction? I’m hoping to build a similar style fireplace but need some instructions. I’ve never done any masonry work either. Anything help is appreciated. Thanks.

    • @89jmcfar
      @89jmcfar Před 7 měsíci

      Same here, I would greatly appreciate dimensions and design info.

  • @dacedruss
    @dacedruss Před 5 měsíci +2

    I understand all of this except the need for the concrete posts, the re-barred slab is carrying the weight, the posts are not only not needed but not even used in this video? am I mistaken? I feel like I must be, because this was done very well and on plan by the drawings shown at the end, but I've watched this twice and the only thing I can think of is that maybe this is for subsidence and you live in an area that has earthquakes, could you not of just hammered in some re-bar off cuts in to the ground and chicken wired them to the re-bar frame and then concreted, and even that seem like over-building to me, anyway not knocking this, this was a very good build

    • @nicholasbaker2904
      @nicholasbaker2904 Před 4 měsíci +2

      I think concrete posts go below frost line for heave support in Northern climates. The pad with rebar isn't deep enough itself to fully prevent shifting in freeze thaw. I live in PA and the frost line is 3ft. I would build it similarly.

    • @crtcustoms6140
      @crtcustoms6140 Před 2 měsíci +1

      The posts are a complete waste of time also the rebar will rust out and only aid in destroying the concrete faster. This tiny pad isn't going anywhere with the proper base that was already there. Rebar nerds to be coated 94 it rust and expand. Over kill to the max

    • @MTHPowerWash
      @MTHPowerWash Před měsícem

      @@nicholasbaker2904from PA, correct, may not notice it for awhile but even something that heavy may lean from our garbage weather

  • @shokrisy4520
    @shokrisy4520 Před rokem

    Thanks for the video!!! Can you please provide a link as to where I can purchase the metal arch or product name at 4:20, would greatly appreciate it.. thank you!

    • @lazydawgproductionz3445
      @lazydawgproductionz3445  Před rokem

      Unfortunately the metal arch is all custom welded. We had our rough dimensions for the width of the fireplace. Lots of trial and error was used for fitment.

  • @VictoriaBenelli
    @VictoriaBenelli Před 3 měsíci

    Could you supply plans/materials list?

  • @bluelotuz2650
    @bluelotuz2650 Před 7 měsíci

    Where can I buy the orange chimney insert (that looks like clay material)?

  • @andrewbeaven3861
    @andrewbeaven3861 Před měsícem

    Whats the name if the 2nd song?

  • @tylerwalther6049
    @tylerwalther6049 Před 2 měsíci +1

    So, what was the point of the 4 holes at first?

    • @jenniesmythe8188
      @jenniesmythe8188 Před 8 dny

      Most likely holds the weight of concrete added before building the fireplace. They added cement in each hole

  • @user-qq3sh5do7t
    @user-qq3sh5do7t Před rokem

    Burn firewood,hot.

  • @quantumofconscience6538
    @quantumofconscience6538 Před měsícem

    Why do people "slant the back wall" of the firebox toward the front in an outdoor setting? There is no point to that in an outdoor fire. All it can do is cause draft / smoke problems if the design isn't very good. Rumfords... flat backs... draft best. It's rare, but yes, people have had smoke issues with outdoor fireplaces.

  • @CookieZ3353
    @CookieZ3353 Před 4 měsíci

    FASTcinating. Too fast for me. I want hear the why's and the how's.