Turning Free Wood into a $1,900 Table
Vložit
- čas přidán 10. 08. 2023
- I turned this free piece of spalted maple into a coffee table that I sold for $1,900!
Thank you to TotalBoat for sponsoring this video. Save 5% on TotalBoat products: www.totalboat.com/morleykert
Gain exclusive access to behind the scenes content and my Discord community by becoming a patron: / morleykert
The Northern Joinery: thenorthernjoinery.ca
Table saw jointing jig: • Table Saw Jointing WIT...
THINGS I USED IN THIS VIDEO:
DEWALT 10-Inch Table Saw: amzn.to/3IJPjfQ
Festool TS75 Track Saw: amzn.to/42vjVdH
BLACK+DECKER Jigsaw: amzn.to/3DLACYc
Milwaukee M12 Hackzall: amzn.to/3Jadrde
Milwaukee M18 angle grinder: amzn.to/47nNb9s
Power carving disc - Arbortech Turboplane: amzn.to/3YmUwlC
Foam sanding cushion for random orbit sander: amzn.to/3YotGtu
Moisture meter: amzn.to/45bSXsU
CA glue and activator: amzn.to/3Prd41Z
Heat gun: amzn.to/3K0TWFi
TotalBoat products (save 5% when you use these links):
Penetrating Epoxy: www.totalboat.com/products/pe...
Special Brushing Thinner 100: www.totalboat.com/products/br...
Wet Edge Topside Paint: www.totalboat.com/products/we...
Premium Marine Primer: www.totalboat.com/products/ma...
Clean Cut Woodworking Router Sled - use code MORLEY5 for 5% off: www.cleancutwoodworking.com/
Milwaukee Random Orbit Sander: amzn.to/3OucSuQ
Milwaukee M12 Cordless Drill/Driver and Impact Driver: amzn.to/3XHSYCd
Threaded inserts: amzn.to/3E4d697
Rubio Monocoat Oil Plus 2C - Pure: amzn.to/3Yqg6VG
Right angle drill adapter: amzn.to/3OxOOJ8
MY FAVORITE THINGS:
www.amazon.com/shop/morleykert
Note: The above shopping links are affiliate links, meaning that, at no additional cost to you, I may earn a commission if you click through and make a purchase.
MUSIC (in order of appearance):
Marches - Tigerblood JewelColeus - Aleph One
Application - Autohacker
Grifting in Vegas - Kit and the Caltones
Aquatic Flower Dance - Ryan James Carr
Demon - Tigerblood Jewel
Ybur - West & Zander
Doo Dat Was - Jules Gaia
Del Verano - Autohacker
Outside the Line - Margareta
Golden Coast - Chill Cole
Singularity - Lagua Vesa
Biology - Jones Meadow
Industry - Thip Trong
Tell Me Something New (Tigerblood Jewel Remix) - Wellness
Fun While It Lasted - Emil Axelsson
Suntrip - Harvey
Glitz At The Ritz - Jules Gaia
Dynamite and Blind - Nahra
I’m a Dynamite - Harvio
Outside the Line - Margareta
Limits - Jones Meadow
12th Floor Party - Jules Gaia
He Fled Again - Heyson
Apparent Solution - Brendon Moeller
Rollicking - Margareta
Cloud Indulgence - Jones Meadow
Ama Groove - Say3
Closer Chain - Jones Meadow
Head On - Jones Meadow
Middle - Jones Meadow
Brendon Moeller - Bahamas
Bird Flex - Bonkers Beat Club
Horse Power Brass - Bonkers Beat Club
Brink - Jones Meadow
INSTAGRAM: / morleykert
TWITTER: / morleykert
TIKTOK: vm.tiktok.com/xSfbdj/
morleykert.com/
#woodworking #DIY #reclaimedwood - Jak na to + styl
Drop your best woodworking joke
Pinning this so I finally have some jokes to tell Eden when she asks for them
His prices
From Eden:
“I have some good ones but I don’t want to crack you up”
I was going to make a joke about carpentry, but I don’t know any that wood work 😮😂
Why did the wooden table go to therapy? Because it had some serious knots!
This is absolutely one of your best pieces of furniture! It turned out so great! The crescent base was a stroke of genius.
Thank you so much!
This table turned out great! While I love how it looks, what I really love is how kind and giving the woodworking community is. Seriously, if you're nice to people, they'll gladly help you out and be nice in return. Great video as always!
David is so generous! Thanks for watching
Always inspiring…!!! It’s always good to see how you're facing challenges and turning waste into art or furniture. Keep going; I wish you bigger and more awesome things in the near future. That’s what happy, humble, honest, and positive people deserve always. Greetings from Mexico! 🎉
I like the subtle shading in the black paint of the bent boards. It softly speaks of a wood base.
Amazing table! I usually don't like aesthetic of natural wood furnishings but this is very nice, I think it was the curve in the base that make a really cool and nice to look at piece.
This was a great video. Especially loved the open discussion about trying to sell it, shipping logistics, and the cost break down. All that is SUPER valuable to any aspiring wood workers. I subscribed after just seeing this video alone and look forward to watching more of your videos.
Thank you!
Nice to see some fantastic work coming out of Toronto area (close to me). So much to unpack... your design, attention to details, creative solutions to problems, how to ship to USA etc. Nice work Morley! Thanks for putting this out on YT for us!
Another great project! Always look forward to seeing what you come up with next :)
I'm a single shop woodworker, and a project like this would take me a lot longer. Kudos for your efficient timing. Would have taken me at least 24 hrs. Three days of hour shift.
Take that back. It would have taken me a month 😂
Amazing work Morley!! Your coolest piece so far 👏
Your the best. Every time I search for ideas I seem to stop on one of your projects and am left amazed
Incredible work! I have to try out that finish
It was a very creative idea. Hope it'll arrive ok. Can't wait to see your next project 😊
That's beautiful Morley!! Great Job!!
Awesome with the cost breakdown. What a journey!
Thanks, Jesper!
All the best that the package arrives safe and sound.
to help strengthen the rotted areas on the top side try using wood hardener. it penetrates really well and hardens up any loose or soft wood. at least in my experience. I mainly use it on veneer to prevent splintering but couldnt hurt to do a few tests
What an absolutely gorgeous table 🙌
Hi Morley I really love your videos, I started watching them a few months ago and it has really inspired me to work with wood and practice making things, you have really inspired me. Thank you so much.
That’s awesome to hear, thank you so much!
No problem
Table turned out beautiful great job. Great video
Is there a way to preserve the bark I like the way the bark looks on the slabs could you like use resin to prevent the bark from falling off
This one is a fav so far! I love it
Awesome! I'm learning a lot .... thanks for all your hints!!!!
Wow this is super nice! I really wanna get into wood working.
Yo i just stumbled across you channel. Absolutly amazing craftsmanship!! This inspires me to get into this.
First time viewer here! I loved seeing this project! The spalting was gorgeous in that piece. I really appreciated your price breakdown (and conversion to USD so I don't have to do the math!) That honesty and transparency was really nice to see. I don't currently live in a location that allows for this kind of woodworking project, but my goal is to be in my own home in 2025 so hopefully I can begin learning from people like you and I can try out some projects myself when I have space. Keep up the awesome work!
this shows most people can woodwork and make some money because there is definitely some more advanced woodworkers that dont even charge this much!
"Water Popped the Grain" (that was key)....Beautiful Table....Sweet Design....that marine paint looked killer! Keep up the Great Work Brother!
When I see basic pieces from Restoration Hardware go for thousands $$$$, I KNOW this table you built is worth so much more. But I understand it's always a battle to find the right buyer. This piece came out so great! One of your bests yet.
Thank you so much!
You might want to check that moisture meter for accuracy. 1 to 3 % seems highly unlikely, especially in Canada.
I was thinking the same thing. Air dried wood has around 15 % of moisture in it.
Been waiting on this thing to sell to get the video!!
Morley- you’ve got the best woodworking content hands down. Keep it up man
Thank you so much!
Beautiful table!
I don’t know what it is about you that I like. Maybe it’s
Your positive energy. We need more
Of that I. This world. Keep up the great work. 🎉
Absolutely stunning!!!
I wish you was my wood works teacher at my high school 😅 you are so good better than me lol you inspire me to make a small business out of wood working you help so many people stay strong 💪
Gorgeous table ❤❤❤
as many have said, this is one of your best works
It reminds me of an old world map. I love it!!!
It's hypnotizing to look at! Thanks for watching :)
Such a gorgeous table ❤
Thank you!
✨Croissant 🥐 coffe table ✨
Love your work man !!!! beautiful
Just discovered your channel man, this table is amazing, wish I could have bought it
I like this one a lot, seems like you're a lot more knowledgeable recently too
The grain looks soooo cool
You are super talented. Great job!!
Awesome video can't wait for more
Absolutely gorgeous
That really looks amazing
Good for you Beautiful work Love your channel.
What a piece and what a channel, hugs from Italy mate!
You have a huge fan from Brazil here!!
That is so awesome!!
Great job! Looks amazing
Thank you so much!
Beautiful piece of art 😍😍 woaw
You are doing so well since i last saw you❤ and you still tank your mom at the end of your video's ❤
Nice to see you again!!
good stuff. thank you.
Morley that wood may have been free but your hard work is priceless! Plus you make a video too!
Thank you!
Does that finish that you put on it block the Water from condensation off of cups and stuff
Wow, that is a nice guy 👍 "Just pick a few of these spalted maples, the birdseyes.." 👍
But, if someone deserves a friend like that, it's Morley! Mom agrees, right? ❤
are we not gonna talk about how the drill and the background music made fire beat😂 amazing creations man keep up the good work!!!
A tip for the "too close to the side:" you can use a longer bit to help if you don't have the right angle bit.
I think the base accidentally having a faceted look actually adds to the appeal, really makes the contrast between the top and base pop.
Just found your channel. And ready to start learning how to build. 😊😊
Dang that is on point so far this week lol. Hope you feel better soon
That is awesome.
I dont even know how to woodwork but this man, this man inspired me and im learning. Also the 3D printing is just… chefs kiss… muah. Its everything I’m interested in. Keep up the nice work!
He said spalted and I just screamed... I'm redecorating my house entrance, living room and hallway and spalting woodd is going to be the theme. Its just something that is so unic and isn't overwhelming to the eye.
I love Penny. She and my 17 lb. black cat, Riley would make a purrfect pair. LOL The table looks so great. Good work. You are a master!
Nice table and great that you were able to "rescue" the slab from the scape heap.
"Cutting after curving" highlights that when making, we need to consider in-full how we intend to construct a piece, reduce construction complexity and avoid potential disasters. Cutting the additional lenght off and gluing it to the other piece before gluing and bending might have saved some angst.
Spectacular!
You guys with your fusion models and such impress me. I do a 3d model in my
Mind while stoned, then go for it 😂😂😂😂
You are fun to watch! AND you are using wood pushers!
Much respect ,nice video like it 👏🏼
I like the top, but I'm not a huge fan of the solid base. Still a fun project!
it looks ass ngl
One thing you can do to help protect your art pieces is to place a plastic bad in areas around your piece, then fill the bags with spray foam, and close it up, when the spray foam dries, it fills in the gap areas to keep your piece from moving around and getting damaged.
Beautiful table. Didn't know that shipping was so expensive.
Hey Morley, loved the output, amazing work yet again. Sorry if i've missed it but what router sled are you using to flatten your slabs?
Thanks for such inspiring work. Love your content
Clean cut woodworking router sled - link in description!
Found you through one of John Malecki's videos - really enjoying your content, especially the music.
Thank you!
Love your videos! Keep doing them.
Would love to know about your hair care😂
Gorgeous
very cool!!
Looks nice
I love all your video. I love wood working 😍
Thanks for watching!
Morley thanks I love your work, Create and make that income.
Thanks for watching!
Morley - For the cut through the kerf a japanese pull saw would have been great. May take slightly longer but you'll have more control over it.
That would've worked great! And I even have one, haha
great video, i love this table, do you know how i could get woodworking tools since im broke and young ?
Thank you! I’d recommend looking on Facebook marketplace for used tools, or borrowing them from friends/neighbours. If you’re just getting started, I’d highly recommend taking a woodworking class.
Good job!!!😊🎉❤
Congrats. I like it.
ive been binge watching your videos i think your my new favorite youtuber
❤️
Hi Morley. I happened across this video and I’m so pleased I watched it. This is a fantastic idea for random off cuts, I personally would have cut it into squares to make boards because I clearly don’t have your vision. Defo a new sub from me 👍🏻
Also one quick question. Do you put epoxy in your hair, I swear those curls didn’t move once no matter how much you moved about 😂🤣😂🤣
This is how it is done, makers helping makers.
Where do I find a guy that’s just giving awesome wood away like that. Wow.
Talk to woodworkers in your local area!
Wouldnt mind having those tools
Morleyyyyy we missed you
Holy Moly! That's gorgeous! How could you sell it? I could never have let it go. Just found your channel. Love your personality. Did you say you're in Toronto? Could you have driven it to the US and shipped from within instead of over the border?
Looks great. I would have personally preferred some metal hairpin legs. Would have saved a bunch of time too.
Pineapple, Blueberry, yuka?😅 love your work, be safe on the road.
Great Video! just a small comment, at 25:09 I believe you mean OSB ?