How to Install the Concetto Kitchen Faucet
Vložit
- čas přidán 16. 02. 2021
- The GROHE Concetto™ Dual Spray Pull-Down Kitchen Faucet is sleek, sophisticated and engineered for superior performance. Convenient pull-down spray easily toggles between regular water flow and spray for maximum versatility for every kitchen task. Meticulously crafted with a high, swivel spout for ease when filling pots, and lever handle that offers precise control of water pressure and temperature. Available in durable GROHE StarLight® finishes for lasting beauty.
To install your GROHE Concetto™ Dual Spray Pull-Down Kitchen Faucet, follow these steps:
1:25 1. Feed the supply lines through the watertight seal and fit the seal in the grooves in the bottom of the sink mixer
1:33 2. Feed the supply lines into the sink basin
1:58 3. Feed the supply lines through the stabilization ring, gasket and washer in that order before screwing on the basin nut to the mounting basin
2:44 4. Feed the nylon hose through the high spout
3:00 5. Feed the nylon hose through the top part of the sink mixer
3:16 6. Put the high spout onto the sink mixer
3:35 7. Screw the sink head onto the end of the nylon hose
3:50 8. Screw quick coupler onto the brass end of the nylon hose that was fed through the high spout and sink mixer
4:05 9. Connect to the bottom of sink mixer
4:24 10. Connect the supply lines to the water supply
4:42 11. Install hose weight to the end of the nylon hose
To learn more about the GROHE Concetto™ Dual Spray Pull-Down Kitchen Faucet, visit www.grohe.us/Single-Hole-Pull... - Jak na to + styl
This helped with my 2nd gen concetto installation- thank you!
Exilent vid Johnathan.
Nice job
Thanks!
is this faucet possible to turn around (for a dual sink)?
What is the size of the wall outlet for this product?
What is the size of the tool to remove the aerator? Where can I obtain a replacement tool
very good
Thanks! - GROHE Social Team
New faucet/little flow??
so all taps now has those hoses attached ?......so water no longer make any contact with the inside of the tap body ?................wouldn't the hoses more prone to leaking ?
At 3:03 you insert the black piece which holds the faucet and adjust it only with some force using your hand. My faucet got loose, when i managed to removed it I have noticed that black piece was loose. I adjust it, re-insert the faucet but after a few days of usage it got loose again.
Hello, thank you for contacting us. Can you please email us at Groheconsumerconnection@lixil.com and write, "Attention David/Alisha" on the subject line? We'll be happy to assist you. - GROHE Social Team
@@GroheAmerica will do, thanks
is the black piece attached to the tap made of plastic just like the plastic ring used to secure the tap to the sink ?
At 2:41 you instruct to unthread the top part of the mixer…my will not unthread. Please help.
Hello, thank you for contacting us. Can you please email us at Groheconsumerconnection@lixil.com and write, "Attention David/Alisha" on the subject line? We'll be happy to assist you. - GROHE Social Team
notive you've replace the hose with a nylon one. the one we have is ribbed and gets stuck. its really BAD
Hi TRaddcliff, thank you for contacting us. We'd like to help you resolve your issue, can you please email us at GROHEConsumerConnection@lixil.com, we'll be happy to assist you. - GROHE Social Team
At 3:22 the chrome spout is attached and there is a lock ring. If need be, can the chrome spout be removed? Does the lock ring prevent dissasembly?
Hello, thank you for contacting us. This is not actually a locking ring. It is only a spacer ring that holds the spout tight to the body. The spout will be able to be pulled up and off of the body with some force. - GROHE Social Team
@@GroheAmerica could you explain how to remove the spout to avoid damage. The first few days after the installation the spout was tight (and maybe too tight/hard), but now it's kind of loose. I need to adjust it. Could you explain how? thanks