Why am I just finding this video that pro q3 trick is the shit. I watched a couple of videos with this guy he might just be my new favorite mix engineer. Bro knows his stuff.
Clean video. I lowcut at 18-20 Hz since my music and the venues I perform at sometimes give you frequencies down to 20Hz. Dedicated sound systems. And yes, it's not audible ... but definetly an important part of certain genres and translated life through those systems. So I'd say don't make it a general rule statement to get rid of everything down there.
Broo. I loved this video. 1:45 am. I was about to sleep i decided to watch a last video. And now. I can sleep happy and tomorrow wake up to record something ❤❤❤❤
The best way to mix an unbalanced 2 track is to load pro-mb or any multiband compressor, turn down all the compression and use the volume knob to turn down/up some part, I usually do the very low - lowmid - mid - high mid- very high and then use ozone imager to fix the stereo image and then from here I have most of the time relatively well mixed 2 track. Also use the pro-mb in minimum phase
you can also hard brickwall eq certain sections of the 2 track if you make a double or triple of the 2 track on different channels, then you can use the fader to adjust volume or add distortion plugins without affecting the entire frequency range. for instance i might high pass one copy of a double of the 2 track then low pass the other so that its just playing the low end signal. now i can add plugins and only affect low end frequency range. I can mono out the bass if needed as well as stereo widen just the top end
Don’t EVER low cut your beat or entire mix at 31hz. It takes away from the Low end. Around 17hz should be enough cause it rolls into 21 hz, which is the Frequency the human ear can actually start hearing.
So question when you pulled the frequency now on the pro Q3EQ the one that’s on the vocal track do you leave that part pull down or was that just an example of where you wanted to pull it down at so you can go to the two track and poke apart down do you leave that active or was that just an example
Thank you for this informative tutorial! I learned a lot. I'm curious if there's a distinction between employing this technique and utilizing the Trackspacer plugin, which purports to achieve similar results, especially when working with just two-track files?
Trackspacer needs a sidechain input of something you use to duck something else dynamically, and thus you can't really use Trackspacer on a master bus or ala in this case a 2 track stereo mix/file...
Free Gems : When mixing a 2 track beat - duplicate it. High pass 1 beat at like 500 hz ( Wherever the bass kicks out ) - low pass the other side at like 500 hz ( Same spot where the bass kicks in / out ) - You now have control of the highs and lows volumes much better - You shouldn't really have a problem mixing a 2 track wit this method, works like 100% of the time.
The gems are always the youtubers with low subs to start
the low subs are probably because he doesn't know what stems are
😂😂😂what bro @@crimson5109
Maaaaaan you don't know what you just did to all my past and future mixes with this gem
Why am I just finding this video that pro q3 trick is the shit. I watched a couple of videos with this guy he might just be my new favorite mix engineer. Bro knows his stuff.
Clean video. I lowcut at 18-20 Hz since my music and the venues I perform at sometimes give you frequencies down to 20Hz. Dedicated sound systems. And yes, it's not audible ... but definetly an important part of certain genres and translated life through those systems. So I'd say don't make it a general rule statement to get rid of everything down there.
Broo. I loved this video. 1:45 am. I was about to sleep i decided to watch a last video. And now. I can sleep happy and tomorrow wake up to record something ❤❤❤❤
The best way to mix an unbalanced 2 track is to load pro-mb or any multiband compressor, turn down all the compression and use the volume knob to turn down/up some part, I usually do the very low - lowmid - mid - high mid- very high and then use ozone imager to fix the stereo image and then from here I have most of the time relatively well mixed 2 track. Also use the pro-mb in minimum phase
you can also hard brickwall eq certain sections of the 2 track if you make a double or triple of the 2 track on different channels, then you can use the fader to adjust volume or add distortion plugins without affecting the entire frequency range. for instance i might high pass one copy of a double of the 2 track then low pass the other so that its just playing the low end signal. now i can add plugins and only affect low end frequency range. I can mono out the bass if needed as well as stereo widen just the top end
VERY GOOD EXPLANATION DUDE , i actually came here cuz i'm working on an order on fiverr and i'm in the same situation
Don’t EVER low cut your beat or entire mix at 31hz. It takes away from the Low end. Around 17hz should be enough cause it rolls into 21 hz, which is the Frequency the human ear can actually start hearing.
THIS was SUPER EXTREMELY helpful. This dude is a wizard 🧙🏾♂️. I’ll be his apprentice
aye what that song called bro? Fye tutorial as well 🙌🏿
This was great, thank you for sharing!
Use these tricks in every mix! Dope video bro keep giving the people 💎 ✊🏽🔥
Gems 💎 where just dropped on me from this video 🙏
I recently just came across this issue for a client, thanks for advice on how to handle this issue.
great content
Will appreciate a and b level-matched. want to hear the difference. do this for all future mixing videos...
Bro I needed this
Great video
Great content 🫡
Great vid!!!
even more better is just eqing the mid of the beat in proq and pushin the sides
New Subscriber Here 👋 Good Work
So question when you pulled the frequency now on the pro Q3EQ the one that’s on the vocal track do you leave that part pull down or was that just an example of where you wanted to pull it down at so you can go to the two track and poke apart down do you leave that active or was that just an example
can we get a mastering video next with asher???
Good idea.... wink wink... be on the lookout...wink wink
Thank you for this informative tutorial! I learned a lot. I'm curious if there's a distinction between employing this technique and utilizing the Trackspacer plugin, which purports to achieve similar results, especially when working with just two-track files?
Trackspacer needs a sidechain input of something you use to duck something else dynamically, and thus you can't really use Trackspacer on a master bus or ala in this case a 2 track stereo mix/file...
what is the beat called? it's so fire :)
can you show us how to gain stage the 2 track
Free Gems : When mixing a 2 track beat - duplicate it. High pass 1 beat at like 500 hz ( Wherever the bass kicks out ) - low pass the other side at like 500 hz ( Same spot where the bass kicks in / out ) - You now have control of the highs and lows volumes much better - You shouldn't really have a problem mixing a 2 track wit this method, works like 100% of the time.
Nice work.
why does my pro q3 only show me the white lines, it doesn't show the red ones anymore. How do you switch between the 2 colors?
Good video. Is there nothing that Pro-Q can't do? If only Fab-filter made hairspray. Gahhh! people! send the stems to Asher.
Maaaaan for real!
💥💥💥💥💥💥
sounds like bro mixing lil uzi 😭😂
That is NOT a stem. Thats is called a TRACKOUT” is a difference