Powder Coat an entire car? Watch this FIRST | BLK ICE pt. 6
Vložit
- čas přidán 20. 06. 2024
- Power coat from start to finish.
Watch more Videos!
Found 96 year-old hitchhiker middle of desert | Gene Winfield
• Found 96 year-old hitc...
VIVA LAS VEGAS with Sailor Jerry Rum
• VIVA LAS VEGAS with Sa...
'57 T-Bird Final 3 weeks;
Couple owned this car for 75 years | Final 3 weeks of a 6 year BUiLD pt.1
• Couple owned this car ...
Hilborn Fuel Injection Tuning | Final 3 weeks of a 6 year BUiLD pt.2
• Hilborn Fuel Injection...
Engine pushrod FAILURE | Final 3 weeks of a 6 year BUiLD pt.3
• Engine pushrod FAILURE...
EPIC Dyno Tuning…BUT did it make 600hp? | Final 3 weeks of a 6 year BUiLD pt.4
• EPIC Dyno Tuning…BUT d...
Yukon Gear Saves our REAR | Final 3 weeks of a 6 year BUiLD pt.5
• Yukon Gear Saves our R...
1957 Ford Thunderbird hits Pacific Coast Hwy | Final 3 Weeks of a 6 year build pt. 6
• 1957 Ford Thunderbird ...
Follow us on Facebook and Instagram!
Facebook; / mackeyshotrods
Instagram; / mackeyshotrodshop
Please like, subscribe, and share!
THANK YOU!
- Brian Mackey - Auta a dopravní prostředky
Jody mockin here. I’ve always wondered what this would look like, freaking awesome tic tok sent me here. The work is gonna keep me here
So why didn't you metal finish the quarter panels before it was powder coated? They look bad.
THAT LOOKS AWESOME !!!
I had a media blasting business and used crushed glass. The surface was a lot cleaner than other medias. I wonder why they used garnet. I am sure they have a reason, and know what they are doing. Just stumbled on you channel and will look forward to this project.
Out of all the Colors, 🖤 Dyamn!!!!!! That Truck looked Trick at the end.
Why didn't you do the doors, tailgate, n hood at the same time? Or did u just not show that?
Anyway Nice job!
Cheer's from Fla.
We restored a 59 Elky to all original 348 tri power/ factory AC a few years ago . Super cool guys!!!!!
Sure dose Brain thanks for the show guys have a badass weekend later
Beautiful work
Thank you! Cheers!
People dont seem to understand you can do regular bodywork and paint over the powdercoat, this is not the finished prouct. Your basically replacing the epoxy most people use with a powdercoat.
Good put. Not that we didn't understand. But more it wasn't made clear. When I saw the 'after' and that the quarters were not body worked, I assumed the powder coat was a primer coat.
Yeah when I saw the quarters I thought dang the dents suck,but then I realized something had to be done,and I thought maybe they were going to body work it and then either paint it, or reporter coat it, as there had to be away to get a perfect power coat finish since you see other large parts with perfect finishes …the idea of a finished product would of been cool on a car if there was away to do it..
Nice work! I can't wait to see the body on the chassis.
You and me both!
That rear passenger quarter is mangled.. How do they plan to fix that AFTER powder coating? Baffling why they would leave that like that and send it to powder. Otherwise it's a great looking project
going over how you made the dolly would be helpful
Primo does some killer work.
They sure do!
Nice work guy’s 🙋♂️🇦🇺⚡️
Cool! I've wondered if anyone did whole vehicles in powder coat.
Now the fun part begins!
David Freiburger's F bomb Camaro was completely powder coated way back in the early 2000's.
I have been wanting , an old hot rod for the longest time and just cannot get ahead to buy work on or even start any kind of project from losing my job to health, to lose my sister to cancer and motorcycle wreck, me and girlfriend on a bike going 5 mph and another guy and his wife hit us from behind going 60 and he ending up dying on the seen…..It just keeps coming and coming and I don’t know why plus I’ve never won anything so that’s out of the question .. to the one who wins the truck enjoy and take care of it… hope you love it !!!!! but you guys are awesome man love the video and you guys are answering my question on…..Can you powder coat vehicle? I’ve always wondered if that could be done and what it would take in here we go, so good luck guys appreciate your videos. Keep up the good work.
Let's gooo total cool powderoat
Flat straps for the bracing was a bad idea. Some 4x2 cut in half would be much stronger and only one inch thick it's low profile and will look much better like you put some thoughts into what your doing.
Cool do it on yours
@@robsmith6093 no need I'm not hacking mine it's original
I Agree, when I saw that I thought are you serious, flat bar ?. But then again when I saw the shop owner running his hand across fresh sandblasted metal , I don't think these guys really know what they should know. ......Next
There is no better technique to protect the metal,looking good.
Especially when you’re close to the beach!
Is the Powder Coat being used as a primer or is it the final surface ?
Either way, it looks great and that's a very cool rotisserie jig too.
subscription added, love the 1959 el camino...Dave/WBA
You have been selected as our winner for a 1000 subscriber draw! Check out our latest short!
@@MackeysHotRodShop thanks, Dave/WBA
@@whitebeardadventures9208 is there an email or instagram we can reach you at?
I knew a fellow who connected the stinger of his welder to his paint gun and the ground clamp tp the body of the tractor or car or whatever he was painting. He said his paint stuck better.
Manufacturers use an electric charge when they paint vehicles.
I love the thought of doing this, however the quarter panels look like waves!
You can paint over powdercoating just like a primer?
Yes, exactly.
That's lucky as you could see all the imperfections in the body work when it came out & the sun hit the tops of the bed. Will the powder coating make it rust proof?
Awesome
Great vids just subbed only thing is the music is so loud vs the talking have to turn sound up and down every time 😢
We are working on that thanks for the feedback!
Wow, powder coat the body? That's rad!
The good stuff starts at 3:45!
What is the cost compared to other processes?
😅 great job I like the idea
Even powder coating needs primer first. One day that topcoat is going to crack or chip and then there is bare metal to start rusting. Always use sinc primer on metal and epoxy primer on aluminium parts thst are going to be used outdoors. Those primers are powders too. Everybody knows this, but this is just a reminder.
Only problem as far as I know with Powder Coating the Body, Is that you could not use any Filler, cause your Baking...
They make fillers for powder coating.
Bare metal ➡️ powder coat ▶️ filler ▶️ sand & block ▶️ primer & paint.
The powder coat is a way to protect the metal & stop rust. If it looks good, even better.
Cool👍
Do you have any plans or a video for the rotisserie
Check out this video we show putting it together czcams.com/video/EUeNx-fsiw4/video.htmlsi=MCOp-RWXCucAK5n-
Greatest ideas to protect amazing cheve
The frame holding the car body...How did the casters hold up inside that oven at 400?
Steel casters
Cool but I wonder if the “Mystery Client” will wave back at the long panels?
Ha! This is only the base layer, bodywork and block sanding begin now. Watch upcoming videos. 👊
@@MackeysHotRodShop Will Do! You now have my undivided attention!
Question. If you powdercoat you can't use body putty to smooth the panels? So how do you finish the body for show?
After powder coat, we scuff with 80g and apply body filler. From then on, it’s standard paint and body practice.
@@MackeysHotRodShop thanks for replying, so the powdercoat is more for protection then?
I had no idea you could powder coat an entire car. Isit more cost effective or more expensive?
Powder coat is $20 a pound will do 8 semi wheels prep is super costly
wow very cool
I'm Gonna give a HELL yeah
Cool 😎 !
IMPOSSIBLE!
That’s what I said
these give aways only for your country or world wide.
Great question
T-shirt give away is world wide. Hot Rod give away is USA only.
It’s funny how people have to touch things when it just got done sandblasting. Oil and salt from your skin will make it rust again.
💯
This why you never trust a blaster to prime as well .. there just not at the same level of attention
Wow, the older Asian fella doing that work is impressive.
Feel like I should be seeing him doing pilates in the community park instead of this type of work.
Why are you powder coating the whole car at this stage??
Rust prevention…just like epoxy primer.
@@slvrktman7824 I figured this. But why not use epoxy primer? Gotta be cheaper and since this'll be a show car in CA (I assume), rust will never be an issue.
Wow
Thank you 🙏
Why spend so much time and money on the first copycat of the awesome 57 Ranchero?
The music junked another video 👎👎👎👎💩💩😬
Dang it. We’re working on making these videos better. Thanks for the feedback. We really do appreciate it 🙏
That powder coating is butt ugly and far from a shower finish. Rough on the sides, with blemishes.... who would want that??
This is basically the primer coating. Regular body work to follow.