Device for Winding Coils with a Counter
Vložit
- čas přidán 25. 08. 2024
- Digital Counter - aliexpress.com...
Reed switch - aliexpress.com...
Neodymium Magnet 5x3 mm - ru.aliexpress....
Music:
1. Happy Bluegrass 3
2. Way Beyond Seeking (Instrumental version)
3. For What Awaits
epidemicsound....
Friends, I now only realized that it is better to place a magnet on the side of the handle! Then you can make the whole device shorter and the magnet will not interfere with the removal of the coil. See the picture - ibb.co/tLsV72y
And also offer your ideas of modernization!
grain ⚠️ God has said in the Quran:
🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )
🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 )
🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 )
🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 )
🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 )
⚠️ Quran
Better yet, put the spool assembly outside the other (left hand in the video) support, then you wouldn't need to move the axle in and out to replace a spool (which is the configuration I've seen in all the magnetic pickup winders I've seen)
Good day, Sir. I want to offer you a new intro for Your channel, please send me a contact if interested.
Еще по-русски могу, жду ответа)
how to contact you?
Remember the coil can be a precision device, how it is wound is important. Check how a hiqh quality winding is made. Not taking anything away from this. but for results in sensitive circuits the windings must follow a procedure that ensures repeatability and precision. This is the first video here I've watched so I may have got it completely wrong, so sorry if I have.
I like the reed switch idea.
extremely simple and WELL DONE channel without stupid free energy claims for clicks!
Thumb Up buddy
*Skeptical Open-Mind*
Thank you!
Nice and simple. If you makes slots where the threaded rod goes on the standards the shaft and coil can then be removed without having to un thread everything
Great build 😁👍👍
Respect, idea with holder for counter magnet is great, will take for my coil jig.
Good idea. I did not know that such counters do exist. Because of you video I now know about it in case I need one in the future :)
you can try to use a calculator... you press 1 + 1 and then = (equal)... the wires can be connected to the equal and maybe with a capacitor in parallel to avoid double triggers, it can be between 1 nanofarad to 100 nanofarads i say (just in case it becomes needed, not sure)
the reed switch can be bought to some electricity store as a window-open sensor for alarms (better ask for some infos there to be sure it's a normal reed switch)
To use a calculator is a good idea and might work, however the digital counter is not expensive to buy and seems to work very well. I am not sure if a normally open (NO) or normally closed (NC) reedswitch was used by "grain" in the video. It seems to be "NO".
@@Flederratte i just tought that a calculator is easier to find around... i don't know of the existence of normally close reeds, they may exist anyways, alarm ones will probably be NO
Good idea. I was thinking of doing something like that. As a counter I'll use a pocket calculator
Excellent job
Подшипники от роликов хорошо подходят для таких устройств. И перо на 22 мм продают повсюду.
Really needed this!! Awesome!! Good job!!
Cool stuff.
Add a slow rpm motor and a count-down clock that stops the motor at zero, you can pre-set the amount of turns. Also, cut the shaft inside the frame and put in a thick nut in to keep the two parts of the shaft together. make it easier to get the coil out.
Super creative side.
Good job mate
BRILLIANT
What an idea!
Excellent!! 👌
Nice project. Now you can add a second pole ado hold the source reel.
Works great! I just hope you don't have a lot of coils to wind during the same session. You could modify it so you don't have to take it apart each time. Place the pillars closer together and wind your coils on the other side of the pillars. Another option is to have the outside pillar removable using a wingnut. Finally, you could dovetail the last pillar so it slides in and out easily. Or you're happy with the way it is and that's great as well.
Yes, the device is very imperfect and it is possible to upgrade a lot.
@@grain-diose It is perfect just as it is. I enjoy your watching your build vidoes.
Brilliant! Thank you for sharing.
Спасибо, теперь знаю что буду делать на следующих выходных)))
Для более основательного девайса я бы подшипники использовал, тут я не стал заморачиваться, решил для демо достаточно и так. На ручку все же удобней вращающуюся трубку. Использовал пруток М6, он очень прочный, поэтому можно сделать девайс длинней, тогда не придется для снятия/надевания катушки сдвигать держатель магнита. Ну и для совсем фанатов движок с редуктором (думаю лучше с резиновым ремнем) и плавной регулировкой от нуля до максимума, что нужен.
@@grain-diose Спасибо за ответ, но думая что лучше латунные втулки чем подшипники, а вместо редуктора шуруповёрт.
@@user-rw1vr7rz8u Я добавил коммент и закрепил вверху: магнит (или контактный "микрик") лучше располагать за правым бортиком, рядом с ручкой. Тогда не придется его дергать туда-сюда каждый раз при вставке/снятии катушки. И не нужно будет делать более длинный девайс. Рисунок - ibb.co/tLsV72y
Every sewing machine has an electric thread winder. you can take advantage of it.
saudações do Brasil a todos. uma máquina dessas aqui no Brasil é uma fortuna!!! é bom ver canais de qualidade no CZcams. simples e inteligente. muito bom. parabéns. sucesso.
Obrigado!
@@grain-diose . saudações. tu merece. o canal é muito muito bom. saúde, prosperidade e sucesso.
Good idea
That's a good one. Hoo-Wee, that was some fast cutting. LOL!!!!!!!
Super👌
I had made the RPM counter with Reed Switch & Tally counter
Molto utile bravo
Good idea sir thank you
ЛАЙК! Блестящее видео, как всегда!!! От этой блестящей " простоты" и мысли появились ! Например - измеритель не только витков, но и длины. Не знаю надо ли? Может попробуете уважаемый Grain? И может "катушку" с боку лучше мотать? Спасибо за видос ещё раз!
Конечно, можно много чего усовершенствовать, в первую очередь двигатель, конечно. А самое главное, я не там магнит расположил, поэтому приходится каждый раз отпускать крепление магнита и сдвигать его вправо, чтобы надеть/снять катушку. Его лучше расположить со стороны ручки. Я написал комментарий и прикрепил его вверху, там и картинка - ibb.co/tLsV72y
U can need attache gears for prime mover
Yes, you can use the motor.
Where do you source those empty coil spools....especially with the square hole core??
We can use this only idea with fishing rod.
An interesting option!
Muito bom, vou fazer o meu.
Instale um motor de passo pra fazer o giro, ficará ótimo.
Abraço.
❤️
Wow!
I gave it a like because it is a good little manual winder... But, it could have been so much better if some explanation by text inserts (materials used here and there etc)
I decided that everything is clear and true. In addition, materials can be improvised. :) I used an M6 threaded rod, plywood, pine boards, 10 mm textolite for the magnet holder and 3 mm rubber for sealing the coil.
Get the Meccano out and add gearing. It would make it a lot more convenient to use.
Yes you are right.
Esti super
Sir super sir
Good idia
and for those smaller jobs where precision is important and u need your finger tips all up in your work, use a foot pedal
Yes you are right.
grain I’m very inventive... soon enough will be building very unique coils and will need my finger tips all up in my work, I was wondering how I am going to keep track of the wraps. I didn’t think of this “digital counter” is there a good one with a foot pedal, as a product, no Jerry Rigging?
El contador de vueltas me gustó por tener números grandes, de eso no dice nada. Saludos.
Sir where can you buy the counter machine? Thanks for answering
aliexpress.com/item/32888563586.html
Very very fantastic
انت عربي
@@saltysalt3368 اكيد
So I took your advice and bought it.
Now how in the world do you actually turn off the unit?
The pause supposedly stops counting and suppose to also turn it off and then when you push the pause again, it suppose to start from where it left off.
The reset which the instruction is not very clear about it, you have to push the reset after you push the pause button in order to zero it out.
The only way I have been able to turn it off is by removing the battery. And that battery area is one tight hole as the cover just barely fits in place, just barely.
( I have hooked up the reed switch in the back where it says "counter" as per instruction)
By the way there is no mention how you turn it off in the link you have which is where I went. I found out from another vender, in their page about how it supposed to turn off.
But sorry everyone, the counter that sells amazon already has a sensor and a magnet, I don't see why you're using a weird red switch. Very nice idea but it must be modified by making sure that the two pillars are closer perhaps by inserting small ball bearings and making the shaft come out on one side so as not to disassemble everything every time. I'm building one then I'll post the video. Hello and congratulations for the video and the idea.
What if I reverse a few turn? Will the counter subtract those turns from total counted turns?
The counter has only two buttons: pause and reset.
Sir i want to buy counter meter please tell me where to get it
Grain, how did you contact between the two cable of the counter ?
Can you please tell me more about it.
👍🏻👍🏻👍🏻👍🏻
✨
You can connect a motor to it and what is that device known as
Of course there are many options for upgrading, including I would advise bearings and a longer rod, so that the magnet holder does not have to be moved each time. By the way, I now only realized that it is better to place a magnet on the side of the handle! Then you can make the whole device shorter and the magnet will not interfere with the removal of the coil.
Hi, Grain, i wanna say you, that IMHO it is better use some gears to the rotating mechanism, because at the moment it is some "heavy" to rotate)))
P.S. sorry for my English, it's better for me to talk in Russian)
Я тоже русский. :) Да, наверное с шестернями или хотя бы со шкивами было бы удобней, но я не хотел грузить ни знителей, ни себя. Короче, у кого мозги технические, тот и сам придумает, как лучше для себя сделать.
What are we attempting to measure? If its RPM of the sensor device, this is great. If we're trying to measure how much wire is on the spool, that's not so great. You'll never get an accurate notion of that with this setup. This is, of course, supposing you're try to measure anything. Maybe you're just loading spools with an unknown quantity of wire for later use?
plz make a video on " how to make a shoke bomb'
I think you counter meter is a watch is I'm right ??
in my childhood time i was listened on radio about making electric writing pad using salt, copper plate, water and battery but that time I am only about 4 or 5 years old. i always want to make that things but i don't remember its topic so i try searching on CZcams and google but nothing found. sir can u help me i hope u can
I do not know if I understood you correctly, look here - czcams.com/video/NAb7RPeBCso/video.html
@@grain-diose sir please search it, it is just like boogi board lcd writing
Все не плохо если только не мотать в другую сторону что происходит постоянно.
Да, тут лучше применить шкивы или шестеренки для небольшого увеличения оборотов или хотя бы на ручку надеть трубку вращающуюся, я поленился и сделал неподвижную, что неудобно. Сделать рычаг больше - это уже слишком много движений рукой впустую, короче - такя фигня, про которую вы сказали. Впрочем, если приловчиться, возможно дело лучше пойдет даже с такой. Честно говоря, я просто для видео сделал как пример, самоу мне это не нужно, поэтому не особо мудрил. :) Кстати, магнит нужно перенести на сторону ручки, тогда не придется каждый раз его крепление ослаблять чтобы сдвигать вправо при надевании/съеме катушки. Я прикрепил коммент с картинкой - ibb.co/tLsV72y
Спасибо за конструктивную критику!
Siling fan ra banaya
Time for a slow rpm variable speed dc motor now...
Yes it is possible.
Esti din Moldova?
Da, dar sunt rusă. Nu cunosc foarte bine limba română.
Grain esti roman?
Nu, sunt rusă.
pai si de ce faci videouri in engleza? Daca esti roman?
Nu sunt român și nu moldoveni, eu sunt rusă. Scriu prin intermediul unui traducător. Fac în engleză pentru a câștiga mai mulți bani.
ok multumesc mult ca ai vorbit cu mine si apreciez efortul care il faci
@@grain-diose the question from Valentin came, probably, because the price on the label on that piece of wood is in lei (Romanian curency).
Anyway, keen on going! Tnx.
sir please explain concept and principal behind your model
I do not know what to tell you, I thought that everything was clear from the video.
7:11 material Name please
This is a reed switch, it is made of a glass tube, two steel plates are soldered into it. In a magnetic field, the plates make electrical contact.
reed switch - aliexpress.ru/item/32842848568.html
@@grain-diose Thank you sir 👍
How to contact you ?email?
1 st
Sallut
NO TALKY, NO WATCHY
You can buy one for $30
No bearings? Trash
Good idea
❤