Low CG Belly dragger with G-Speed V3 and SCX10 ii axles - ultimate rc crawler
Vložit
- čas přidán 5. 06. 2020
- Low CG ultimate rc crawler featuring the G-Speed version 3 chassis, Dravtech shocks and Axial AR44 axles. 3Brothers RC Yellowjacket and G13 servo are used as well
Specs:
Dravtech short shocks - dluxfab.com/#!/Dravtech-short...
Ssd diamond pro axles - snp.link/6a274f66
SSD chubs, knuckles, link mounts - snp.link/88a649ec
Ottsix Voodoo Klr gold tires - snp.link/b71df869
Ottsix foams snp.link/71b2897a
BPC Servo on axle mount - snp.link/f66af68a
The Crawl space Titanium links - thecrawlspaceonline.ecwid.com...
Dlux fab cheez Berger Trans -dluxfab.com/#!/Cheez-Berger-t...
Robinson racing 48p pinion - snp.link/b5e74df6
3brc 2k yellow jacket - www.3brothersrc.com/
3brc G13 servo - www.3brothersrc.com/
Castle sidewinder Micro2 ESC - snp.link/c13d65e2
Tattu Battery - snp.link/075e056f
⁃ Tattu 11.1v 75c 3s 850mAH lipo w/XT60
GSpeed Tgh-V3 G10 Chassis - gspeedchassis.com
Buy your kits and upgrade parts from this Amainhobbies link to support RC Review: snp.link/6640d084
Join the RC Review Facebook Group here: / 302319827122846 for early videos and extra footage. - Krátké a kreslené filmy
That rig is amazing. I tell everyone if they are into rc or thinking of getting into rc to check out rc review for the best info and content. It’s been fun watching over the last two years and seeing the channel grow. Thanks Francis
Seeing these makes me want to build my own
Crazy huh? Seeing is believing.
the paint job on the creep body looks awesome! the whole rig looks and performs great!
Best Crawler-Channel ! Thanks for your awesome videos!
Wow, thanks! We're the best because of our audience.
Love the reviews. Your very knowledgeable. It helps us all out. Thank you
You are so welcome! Not the smartest but always willing to learn. And usually the most excited in the group.
I really love you show you show us all Angel's of the hobby money or no money keep up the great work
More vids of these please, supper interesting rigs!
Agradezco sus videos, son muy ilustrativos , gracias por compartir.
Looks like a class 2 or 3 rig from So Cal. All comp trucks down here use the game changer/brazen/toyzuki/ chassis and custom bumper set up and call it class 2 or 3
Thanks for the Great videos Guys.
We work so hard!
Not really, we just met this cool dude and said, "holy moly, what the heck is that? Can I make a video? You wanna talk on camera? Ok, I'll talk. Can I drive it?"
Sometimes, the best content is unplanned. You experience our learning and enthusiasm.
I really dig these truck, I'm looking at making one? Really cool bro🌇😎
That thing is awesome 👍
I was the one driving and this was the first 5 minutes. Holy moly it is balanced and intuitive.
Awesome video! 👍
Thank you! Cheers! Sometimes we get lucky.
I'm 99% sure that the rear upper link riser is my design. If he's running Diamond Pro 44 housings, then it's definitely mine! Cool to see!
Do you have one for the Vanquish Currie Rock Jocks for the scx10ii?
Those are Über capable!!! I'd build one - if I could....
I do like heavier Rigs, because they behave more like real Trucks, limitations and all.
But for the do anything, shock factor, these can't be beat! I do like that those Motors aren't as noisy as Revolvers.
Stay SAFE Bro! 😷
Carmine ✈🚂🚙
Your trx4 sport was making most of those lines too.
Im assemblying a set of the SSD Diamods with metal tubes f&r, alum Chubs and SSD brass knuckles for a LCG Belly dragger. Lots like the Gspeed. there are a few decent options, but may seem to be based around capra portals. Not sure I want to do the SSD Protals, not that I'v adverse to it. but it would be 250 out the door for the portal kit and metal tubes for the portal (unless the stock metal tubes work which they might then its only the kit at 190.).
thinking of using the SSD Scale tranny and new od transfer case to add 20% to the front. have the OD gears in the diffs, (both) and can drop the stock gears in the rear and go up to about 32% OD up front. Or put the stock gears up front and drop to about 12% OD up front. OR get the VP underdrive and go to a 5% up front od, or a 43% if put in the rear axle. Loots of good options but its all gear based."
Portal gears can be swapped for od or ud as well. Which is good thinking on SSDs part.
Rig looks like it does really well.
Another sweet build! Just a tad too light for me. They don't move the same when they are that light and I like to see at least a little bit of tire deformation.
Fair enough!
Fran you should do a build on your sport and change it to a belly dragger for us all that's what I would like to do to mine I need some inspiration ive got my eye on the brazin ATL
For sure. I just have much work and anniversaries going on! :)
Francis,. Look into UGRC Lab Predator Chassis for the Gen8. It is a belly dragger comp style chassis that is a game changer for the Gen 8 platform.
I would like to see you do a build on this.
Kind regards
curious why are his HC links bent at the opposite end of every aftermarket HC link? His are bent at the wheels, which appears to be installed wrong?
Can you do a step by step build of on of the bad ass belly dragers
Nice rig but sometimes I think lighter is not always better. Low cg is great, don't get me wrong. I would but on some heavier wheels.
Why? Why not add more dense weight around axke or st hubs(,center of wheel and somewhere low and centered in a sphere on the chassis? And i m3anndense as in tungsten. Not brass. Less rotational inertia to deal with and better more practice location of COM..
Would anyone know what brand or who makes the carbon fiber wheels used on the truck in the video. Any other carbon fiber 2.2" wheels available?
Thank you
Can you please tell me what size of OTTSIX drive shafts were used on the build? I’m currently converting a Axial 10.2 to G SPEED chassis.
Wow that truck is amazing, high-speed v3, is there anything it cant do, how much is it???😀
Did he change bullet plugs on sidewinder?
I’ve yet to combine mountain biking with RCing, good on you
This mountain bike has an assist motor and a trailer. I literally can get to a crawling spot 10 miles away and 3000 feet high. And enjoy the journey.
What body style is it, look like Powerwagon?
Can u do one with the negative g chassis
What carbon fiber wheels are those?
With that trans set up can he run a dig unit ?? My wroncho with AR 60's and a servo winch is about 6 lbs.
I do not think so. Links to this transmission is in the description now. There's a version with overdrive and one without.
What kind of foams are they
Hi.I would really like to build a lcg chassis kit. but i am a noob. don't know what is going where
What pinion goes well with the yellowjacket motor? I have the 1500kv and the pinion noise is louder than the motor itself.
Not sure. We did check the pinion mesh and it is dialed. The motor is only loud during startup.
Please tell me you using ESC&motor
Sorry I'm Japanese.so my English is not better.
These trucks are incredible but they aren't very scale. How can they be Cat 1?
lol -- might cost a lot but i want one -- 👍👍😎😎 EJ
Was those rocks & area made for crawling or just part of the landscape?
It was a waterfall feature gone awry. Shortly after they built it ( about 200 yards long) they realized how much water it consumed. And that we live in the California desert. So they shut off the water. Probably decades ago.
Lol thanks! I always wondered too. I would be there lots.
@@RCReviewChannel How cool sure makes a neat crawling area. To bad it's so far for me to drive to enjoy it. :-)
@@RCReviewChannel Do you have any resources for locating crawl spots? I am in Socal desert too, new to hobby, need spots....
What kind of E-Bike is that? How much and where can I buy one? Thanks!
It's a Fezzari and it's a ful-on big mountain ebike. Available here for $3600 www.fezzari.com/wirepeak
Is that dirt or concrete
How wide are the frame spacers and is there much flex in the frame?
Recommended frame spacer length is 67mm or 70mm.
@@GSPEEDCHASSIS
Why do they go for a that wide chassis?
Is there any remarkable performance difference to narrower chassis?
Squeezing the chassis rails in, to meet the narrow spacers creates a more rigid frame. Also the narrower spacers creates more room outside of the rails for the shocks.
@@Boss-dr2zk 👍
Hey there does anyone make the bent links for a TRX 4 sport Thanks,
Bigvs1 locked up RC
Hardcore RC may make them also
Tnt, in the works, rc4x4 performance
I have almost the same rig but I have the micro x
do you have a Link for the Carbon Fibre wheels?
Message Tech Factory Racing on FB.
What wheels are those? I can’t find any CF 1.9 wheels...
Wheels are Made by Tech Factory Racing. See FB page and message them.
Sherwin C thanks bro! I’ll look into them.
Awesome builds! But the motor sounds is driving me nuts! 🙄
It's a tough one. The Holmes Hobbies Revolver is a little louderr
Mic makes it worse.
I actually like the way they sound, lol.
The Sound ist pure agony. I hate it.
Anyone else want to test their rig on this spot, to see how it compares? Haha.
We have 20 crawlers now run through this course. Lots of data
Forsure would be awesome......traveling from Germany a bit to far.
@@RCReviewChannel I wanna be #21! :P
@@lukasgarage956
In welcher Stadt wohnst du?
@@lukasgarage956 If you Go, Tell me. Im in.
How can the sidewinder possibly be smoother than the micro x? The esc only controls the voltage and the motor pulls current based off the demands at given voltage levels. This is why your servo test the current rating went up with the voltage used. The sidewinder would have to have higher throttle resolution in order to possibly be smoother. On my mamba monster x the esc resolution allows me to give increments of 0.016v using a single throttle curve point at 50% throttle = 20% power. My puller pro standard 2700kv needs to hit 0.066v to even rotate... which unloaded would equate to 178rpm. With load it will have an even lower rpm.
This is called confirmation bias. Someone hears a rumor, that rumor creates bias, and when the individual sees any difference between the two observed samples they attribute that difference to the rumor.
Strait from castle, the esc cannot control the amount of current drawn by the motor, which is why you need really good batteries for high power motors because motors like my puller pro r 4100kv, which draws 160amps in my trx6, will suck the life out of lower quality batteries. And when that happens it puts a lot of stress on the esc and can fry it...
This is just for an out-runner motor which is sensorless.
I have run both the Sidewinder Micro 2 and the Mamba Micro X and have replaced all of my Sidewinders with Micro Xs. The Micro X is a much smoother ESC than the Micro 2. I've used both on brushed and brushless motors and the Micro X has much better throttle resolution.
Looks too light. Maybe sum weight to the hub and axels work.
Wow
It doesn't just clear the tough lines, it makes new lines.
@@RCReviewChannel I noticed some of those lines were mind blowing to even consider. Must have been a blast.
Would like to get together and talk crawlers give me some pointers im in Morgan Hill so im local
I can’t get into these “belly crawlers” for some reason.
I also love my TRX-4 more. But a little bit of different things it always nice to see. Like a Capra, like low CG Belly-Crawler...
Great thing is they are region, and crowd specific. It's one of many avenues enthusiasts can dig in to. If they want...
@@RCReviewChannel i agree you need a bunch of terrein to play on so you don't get bored of the same runs over and over.that is a interesting thing.
This part of the hobby has a bit of everything.From scale appearance
To all out crazy trail buggies built for strictly function a little go fast thrown in.
Its mostly used for comping or a cheater truck.
Can't deal with the sound.
That’s not true. It’s not smoother. It’s cheaper that’s all. P
This crawlers looks like 4x4 bashers with narrow tires. Next step is to get rid of that body ... Axial XR10 , return of the crawler
the cameraman should control his breath n hand...shakky video makes dizzy.
the ebike makes me sad...
It's ok. rode the bike here 5 miles from home. Saved at least 20 car trips already and get to RC's at the crawl spot instead of 1/4 mile away.
noisy motor I think
Yeah, outrunner motors are loud!
@@RCReviewChannel thanks Francis. Did not know ☺️
@@RCReviewChannel think I will go with the Holmes Hobbies stubby 2700 kv as you have mentioned sometime ago 😄👍
Gspeed the copy cat chassis
Brian Moreno what is it copying if I may ask?
John Hickey their v1 was a copy of the bpc chassis. Since then he has had someone design his chassis now. They’re nice. But im a Toyzuki guy.
Might be a bit of a stretch there. And a low blow.
That is false information! When the first GSPEED Chassis was designed and I was accused of copying BPC, both BPC chassis and the V1 GSPEED, on Facebook to the public, both were placed on a Hobbico cutting mat showing measurements, proving that the rails were different. It's very unfortunate that false rumors like this are carried on by hearsay.
GSPEED Chassis well I got a v3 on the way so no matter. Between Francis and Bill Deras recommendations for your chassis,that was enough for me. Just need to figure out what transmission I need.🤔
Quedate en linda vista y haz mas videos buenos que da verguenza este hobbi con las explicaciones que das pero te crees que somos tontos esto ya lo e visto hace 6 años no as inventado nada amigo chino calidad china