Can you please turn your volume up please. Really amazed with the fabrication work. I love working on older car,s trucks. Just can't hear your conversation. Tks.
I saw you on fab rats channel and thought, Dang that's a cool truck, looked up Old school garage and here I am watching the 33' build! Thanks for the good content Merlin!
Merlin, I just watched an episode of "welderup" double blowers and two turbins on a diesel 6 cyl. And now this project you are building amazing stuff . By the way, I don't use telegraph thank you for the acknowledgment on your trailer project
Merlin love the build. I saw a tip where you drill a hole just big enough for the nut side of a washer face nut and you weld the nut into the plate around that washer face. Refer Karl Fisher Make it Kustom. Sweet idea for welded in nuts.
Merlin, I found you on Paul's channel. I see the blue 'T--MP' flag in the background, so I know we are on the same page! My word, your creativity is second to none! You have such awesome vision! I am really blown away and I can't wait to see this baby in full battle gear! Thanks so much for going out of your way to film these projects and share them with us! I also can't wait to see part 2 of taking the Cessna 150 across the country! You keep filming and I will keep watching! Thx again! Peace ☮️
Sorry to be a nuisance. Did some digging and found your website. I was born and raised in the Havasu area!! I’m glad I subscribed. Now I can see a bit of Home in your videos. I’m in south central TX near San Antonio now. I miss the desert sand and Colorado River water. Thanks and have a good one!!
Wow, Merlon you come up the some awesome ideas. The way you grafted those 2 frames together it looks like it was meant to come that way from the factory.
You have to fix the audio, had speakers turned right up and could just hear most of what you said, then the music came on and nearly blew me out of my chair. Loving the build, first saw it when Paul came to visit, now binge watching to catch up on it.
we are working on it most of this has been filmed with sloppy iPhones we have a good go pro now we will be improving as we go thank you for your input it’s much appreciated😊🏁😎
Thought you would have welded some diamond shaped plates in like Paul does when he joins frames together. But I guess that solid plate on the other side will do the trick?
I have so many questions for you cuz I want to do something similar of what you built cut it looks so cool and I hope one day I can build something similar to what you built
I would love to find a REO and put a Detroit Diesel in it like this. I built a rat rod Peterbuilt pickup truck with a Buick Fireball straight eight that turned out awesome. I sold it for 30K and the next guy really worked on it and sold it for over 100K. It has stainless steel and copper plating all over it. Really awesome builds.
You probably already noticed that the space between the rear tires is at least twice as wide as it should be. It looks odd. Now Spot On On the rest of the build.
Can't Wait to see this come together i know it will be amazing. I've always wanted a fiftys peterbuilt rat rod,but for now my jeep and my wife gets all my money .ps I'm a new subscriber you can thank cousin Paul for the hook up 😆
Merlon, just subbed coming from FAB RATS, that Dodge is just unreal, is that main a 6 or 7 spd Spicer? In the old days the truckers called the auxiliary trans a "Brownie" as many were made by the Brown-Lipe CO. We had a 45 Jeep CJ-2A with a transfer case made by Brown-Lipe, apparently under license from Dana as parts for a Dana 18 fit it. Is that a 3 or 4 speed "Brownie"? The back to back 4 link rear looks clean, can hardly wait to see the finished truck!
Where are you located? I saw one of the boat videos where you were on Havasu. The Tow Mater video def looked like AZ. Your shop surroundings look like the Havasu area, potentially So NV. But then you said something about snow…so I’m thoroughly confused and have no clue. Saw you at KOH with Paul and just subscribed. I dig the content!!
Does the front axle get a second pinion gear on the backs side to drive the back axle? Is that why the back axle is upside down and turns the opposite direction?
Idk whats harder to watch half a 1933 semi truck resto mod or all the pee gravel Goonsquad endend up with. But hell half a semi is better then no semi. Minus that firewall deal you might be on to something. Ttyl.
weird question. but does your forklift have an F2 Mazda engine? it sounds like my '93 mazda B2200 did when it was bone stock and i do know the same engine is used in quite a few forklifts
What was the percentage of ur muriatic you used. Big box stores only sell a green version of it and used to sell 8%. I have 48% that is mean as hell and always has to be watered down to use.
“And that’s why they call it a fire wall.” BEST LINE EVER!
👍👍❤️
Impeccable timing and delivery.
This is just wild. You obviously have the skill, resources and vision to pull this off. Can’t wait.
I’m just in awe over your skill sets.
Love that you're doing a twin stick! Too many automatics in the truck world nowadays! Todd Konoske the retired trucker.
Flipping the frame, what an elegant solution, nice job!
Wow! You really don`t mess around. That`s quite the ambitious endeavor! You mated those two frames like it was fate that brought them together...WOW
Just want to add you are a genius at what you know and what you do.
I like how you repositioned the cab to line up to the drive line . Make the driver fit the shifter, LOL, brilliant !
Great to see you doing videos,enjoying them 🦘🇦🇺
Looking good Merlin. Can't wait to see the finished product
Great job with the fabrication! 🙂👍
Hey Merlon, you got one of them eyecrometers...nice
Excellent choice, gonna be a stunner!
that mini forklift is amazing
Can you please turn your volume up please. Really amazed with the fabrication work. I love working on older car,s trucks. Just can't hear your conversation. Tks.
I saw you on fab rats channel and thought, Dang that's a cool truck, looked up Old school garage and here I am watching the 33' build! Thanks for the good content Merlin!
Merlin, I just watched an episode of "welderup" double blowers and two turbins on a diesel 6 cyl. And now this project you are building amazing stuff . By the way, I don't use telegraph thank you for the acknowledgment on your trailer project
Thank you for letting us see your home shop and let us into your mindset. I enjoy watching a fabricator at work and talk thru the work
Wow! Just WOW!
Can’t wait to see the ole girl fire up! ❤️🙏😎🤙
I'm envious of you, and your buddy Paul at fab rats. I'd love to have the means and ways of building up a block and replacing the engine in my JK.
And that is why they call it a fire wall!!!! 🤣😂 awsome!
Camera lady rocks it !!
That’s going to be rad when it’s done!
Merlin love the build.
I saw a tip where you drill a hole just big enough for the nut side of a washer face nut and you weld the nut into the plate around that washer face.
Refer Karl Fisher Make it Kustom.
Sweet idea for welded in nuts.
Merlin, I found you on Paul's channel. I see the blue 'T--MP' flag in the background, so I know we are on the same page! My word, your creativity is second to none! You have such awesome vision! I am really blown away and I can't wait to see this baby in full battle gear! Thanks so much for going out of your way to film these projects and share them with us! I also can't wait to see part 2 of taking the Cessna 150 across the country! You keep filming and I will keep watching! Thx again! Peace ☮️
this is a very creative project. total respect for your skills Merlin!
True craftsmanship. Much respect.
There! I did just like you asked…I “liked, shared, and subscribed”, and I like what you are doing.
( I found you from FabRats channel)
👍👍❤️
Sorry to be a nuisance. Did some digging and found your website. I was born and raised in the Havasu area!! I’m glad I subscribed. Now I can see a bit of Home in your videos. I’m in south central TX near San Antonio now. I miss the desert sand and Colorado River water. Thanks and have a good one!!
Very nice fab Merlin! Luv seeing the progression on your vision and, realizing the beauty of it!~ R/
Very, very nice work!
Wow, Merlon you come up the some awesome ideas. The way you grafted those 2 frames together it looks like it was meant to come that way from the factory.
I love it you got some mad skills
Great work Merlin, love it.
Had a chuckle “measured with a tape marked with chalk and cut with an axe”.😂
awesome work! thanks for the lesson!
Enjoying your videos Sir
You have to fix the audio, had speakers turned right up and could just hear most of what you said, then the music came on and nearly blew me out of my chair. Loving the build, first saw it when Paul came to visit, now binge watching to catch up on it.
we are working on it most of this has been filmed with sloppy iPhones we have a good go pro now we will be improving as we go thank you for your input it’s much appreciated😊🏁😎
Very very talented.
New subscriber from FabRats.
Very nice suspension going on there!
Some great idears you have used on this build !!😊👍
The camera woman 👩 deserves a pay raise ! 💪👍🏼
yes she does ❤️🙏😊
fab rat sent and man Im in love with this build? I have a 64 f350 I wanna do like this
Quite a build going on here..🤙👍🏻
I’ve watched a lot of builds, this one is great!
Well done, we’ll done indeed!
Thought you would have welded some diamond shaped plates in like Paul does when he joins frames together. But I guess that solid plate on the other side will do the trick?
Add more clearance on the firewall for the rear rocker box on the motor , in case you need to service the motor.
So disappointed no food in this video, you find such good places to eat
Firewall.......
That's a good one !
👍🏻
Man, that’s gonna be a sah-weet ride!!!
This thing is very cool and needs a lot more views!
Just randomly stumbled across your channel and WOW!! This truck is gonna be AWESOME!!
What a thing of beauty! Love it.
Came over from Fab rats,love your content brother
Cant wait to see the finished product, its looking pretty good.
This is going to be sick… 😎
Nice truck
That's awesome I love the old 5 and a 4
Starting to take shape and looking good!! Nice work Merlin!!
I have so many questions for you cuz I want to do something similar of what you built cut it looks so cool and I hope one day I can build something similar to what you built
AWESOME JOB!...thanks 4 video. be kind.
I Subscribed to follow up your Mini Semi. Thank You Paul "Fab Rats" to share your Cousin CZcams.
That thing is Way Badass brother 👍👍👍👍
I would love to find a REO and put a Detroit Diesel in it like this. I built a rat rod Peterbuilt pickup truck with a Buick Fireball straight eight that turned out awesome. I sold it for 30K and the next guy really worked on it and sold it for over 100K. It has stainless steel and copper plating all over it. Really awesome builds.
You probably already noticed that the space between the rear tires is at least twice as wide as it should be. It looks odd. Now Spot On On the rest of the build.
You and your cousin Paul got loads of talent 😃
Nice and clean, looks good!!
Awesome work 👍👍👍
Bad ass can’t wait to see it done
Very nice job
I was waiting for a hot piece of slag to land on the big inner tube and go POW!!
I was more worried about the barrel that had fuel in it🤣🤣🏁
Mhmmm... thanks for all the yummy ideas and content!
Can't Wait to see this come together i know it will be amazing. I've always wanted a fiftys peterbuilt rat rod,but for now my jeep and my wife gets all my money .ps I'm a new subscriber you can thank cousin Paul for the hook up 😆
My uncle had a purple 32 dodge truck that was awesome! This one is gonna be cool
How many "Bar Napkins" to design this one? ......... I'm liking it!!!!
Awesome build!
Fab Rats sent me 😊
Merlon, just subbed coming from FAB RATS, that Dodge is just unreal, is that main a 6 or 7 spd Spicer? In the old days the truckers called the auxiliary trans a "Brownie" as many were made by the Brown-Lipe CO. We had a 45 Jeep CJ-2A with a transfer case made by Brown-Lipe, apparently under license from Dana as parts for a Dana 18 fit it. Is that a 3 or 4 speed "Brownie"? The back to back 4 link rear looks clean, can hardly wait to see the finished truck!
Where are you located? I saw one of the boat videos where you were on Havasu. The Tow Mater video def looked like AZ. Your shop surroundings look like the Havasu area, potentially So NV. But then you said something about snow…so I’m thoroughly confused and have no clue. Saw you at KOH with Paul and just subscribed. I dig the content!!
Very nice work Merlin but I have questions. Before I ask them I’m gonna catch up in case you answer them
Nice work!
So cool, I'm so glad guys like you take time to make videos. What are the transmissions, and what was their original application?
The eyecrometer runs in the family
Will the rig have a ‘sleeper’ on it? Anxious to continue watching the series and of course to see the finished product. Lookin good!!
no sleeper
dang wish I had that kind of skills
Still doing it old school with a blowtorch and not a plasma cutter like Paul
Sweet !
Does the front axle get a second pinion gear on the backs side to drive the back axle? Is that why the back axle is upside down and turns the opposite direction?
yes
Would a large Diesel engine have been a good choice in place of the gasser Paul had you make?
really nice
Fkn awesome looking good merlin 💪💪💪💪💪💪👍✊😎🏴☠️🇬🇧
Nice music
wow super cool
So awesome!! What is the main transmission? 5 speed, 6 speed? What’s the ratios on the auxiliary box?
Hey Merlin, I got Subéd and all from Paul's channel to your's. BUT, I Can't hear you on my little PC unit, Sorry bout this.
WOW!
Idk whats harder to watch half a 1933 semi truck resto mod or all the pee gravel Goonsquad endend up with. But hell half a semi is better then no semi. Minus that firewall deal you might be on to something. Ttyl.
Sure would love to see how you drive thr seond rearend how abount a show on that?
That odd that the 34 is a 1/4" frame. I am doing a 36 1-1/2 ton and it is 3/16". I like that spliter box you have on there what kind is it?
I wonder if they made the channel taller on the 36 and that’s why they went back to a thinner material that’s crazy your frame is thinner
@@MerlinsOldSchoolGarage was 7" tall. The new frame is 2x8x3/16, yours sure is getting done alot faster then mine.
weird question. but does your forklift have an F2 Mazda engine? it sounds like my '93 mazda B2200 did when it was bone stock and i do know the same engine is used in quite a few forklifts
no it’s a continental
What was the percentage of ur muriatic you used. Big box stores only sell a green version of it and used to sell 8%. I have 48% that is mean as hell and always has to be watered down to use.
I use the clear pool acid and I use it straight
Rite who needs a ruler just ask Paul at fabrats they are just an idea
Please tell me your gonna put a 5 and 4 in it that way you won't get bored. Well I guess I should have watched more before putting my 2 sense in