Yeah baby!!! They are awesome, I put them to work yesterday and they worked great. No rattles, spread the rods out well and held tight on the fish. I can’t thank you enough and the review will be out soon!!!
Yeah baby! Don't let the accent fool ya. I'm a Journeyman electrician and have used many tools throughout the years. But this man can teach us a thang or 3 . I'm just sayin. Keep an open mind and you just might save some money. I know i have saved hundreds.
I would have never thought I'd it either man , but this CZcams stuff got me to upgrading cameras over the years , i never knew what a hotshoe mount was but once I saw one I was like this things awesome lol . Thank you for commenting brother
There you go again. Mr. "I can do it better myself" up to your old tricks again. That was a heck of an idea with the hot shoe mount. I'm already sub'd to Glen so I'll see the review once he does it. They looked real good too!💪👍💯
I really like the way you improve a design using your experience and what your buddies share with you. Like this rod holder you saw different ways to improve it. I also notice you pointed out on another video fishing companies have seen your work and decided to make gear and equipment copying what you have done your "hacks" are very smart! the awesome boat anchors you have made, and that zip tie the chain to it is so handy and solves a big problem. Love your ideas and humor great channel buddy.
Ok this is weird! I just subscribed to your channel a few weeks ago, That's me in the picture with the rod rack aboard the Chatt Cats Fishing vessel. LMBO!!!!!! VERY nice rod rack! Love that it's removable!
Really you're talking about the picture Glenn sent me right , that is weird lol and kind of awesome at the same time lol , I appreciate you subscribing by the easy and watching brother
Okay, first off, me leaving a comment is like seeing Halley's Comet, a very rare occurrence, it doesn't happen often. But sir, I about almost cried from smiling when I saw your little girl wearing a welder's helmet, gloves, and holding a torch, saying "Yeah baby." I don't have children yet, but I have made the determination that should I have a daughter first, she's going to do everything useful with me that I would have my son. so there's that. Also, great job on "Thinking outside the boat". I hope this video gets the exposure that it well deserves.
Thank you brother I appreciate that . That was my grandbaby though . She looks like her mom and acts like my wife Haha sassy . Sounds like you'll be a good dad . Im thinking from you talking you may be a Fabricator too ? Either way though I thank you for watching and leaving a Halleys Comet comment I feel honored brother
Fishin N Stuff Looking good for granpappy status, fooled me. Not a professional fabricator, just someone who likes to use whatever tools are at my disposal. Welded together an 18ft tall steel shade the other day, so getting better. Always wishin for better fishin, thanks for this gem!
@@theartofgun5344 hey man I didn't see your reply sometimes CZcams like of stinks at notification . Welding is one of those things you kind of get better at the more you do it . I'm no professional either but I have been doing it a little while lol
Thank you brother you know I appreciate you brother I sent someone to your channel cause they were wanting to know more about crappie fishing and you one of the best I know
They good for cats and striper, you could down size your rod holders and troll for crappie with em too . I fish for everything lol . I appreciate you watching brother. And commenting .
@@FishinNStuff I have seen people troll for crappie, it just would not work here since we have so much flooded timber. I do troll around the bridge, but I have to keep the line right next to the pylons or I do not catch them. Plus the Skeeter ZX200 might look a little funny with those holders! haha. I might however have to try that with my aluminum boat. Good stuff man
Asleep At The Reel Crappie Fishing TV I haven't quite figured out crappie trolling yet lol I understand spider rigging but it just because I never do it I guess lol , but I know people that are very good at it , I enjoy trolling for catfish and striper though
Asleep At The Reel Crappie Fishing TV tour skeeter would look funny with rod racks on it haha but it's an effective way to fish , I can't troll for crappie either , but I love trolling for bass , catfish, and striper . Well I troll for bass on my hobie any way . I had a Javelin Bassboat but I like the simplicity of the Aluminum boat , no carpet = easier to clean lol
@@FishinNStuff I can imagine. I hate fish flopping around on my carpet! :-) I do have a flat bottom that I might consider doing that with, you got me interested. BTW I guess the rod holders will not look at bad as the PVC stand I am about to make to put a dang-um umbrella on my boat. It is freekin hot here.
Well, I gottem built today....they turned out.... AWESOME! THANKS Keith for doing this video. I used some of your ideas on my build. I posted pics to the FB page. Thanks again!
Thank you Sir, that's one way ti make one there's allot of opinions out there . That seemed to be the best way for Glenn though . I appreciate you leaving a comment brother . It's encouraging more than you know
That hot shoe mount was a great idea, after to was on the boat it looked really good. You do an awesome job on all your DIY’s 👍. Good little helper you have there too 👍. Keep em coming Keith, I enjoy watching your videos.
Well done. Maybe later you could put VHT High Temperature Spray Paint Engine Enamel Gloss Black SP124 paint on them & then use one of those 1600w heat gun to heat them up to 287°C (550°F) so you have baked enamel on the steel.
You know that's a great idea right there . Ive had tons of success with the bed lines but you know on the painted part I showed , where the rod holder slides in that work work way better I bet . I appreciate you commenting brother ol and watching it means allot
Haha I'll do what I can , you know I got you lol . I appreciate it brother I got the kind of mind that wonders , if I ain't destroying Chinese reels im thinking up something to make lol
Great job Keith, that is a awesome rod rack. I really need to get with you when I start building the Patriot Kat pontoon. I’ll be making rod racks and other stuff that you eye for fabrication and design might point me in the direction I need to go. Thanks for sharing another great DIY video. Keep up the great fun. God Bless America.🇺🇸
I KNEW you had to have help building stuff. You're the muscle, But Sydney's the Brains behind the operation. Lol. She's an AWESOME designer of rod holders. I'm gonna have more rod holders on my boat than I have rods for , and I have well over 30 rods. !Lol. "Tight Lines " Brother, and "Fish On" ..May God Bless you and your Family , and have a very Merry Christmas, and a happy New Year.
She's my Cupcake,,,,, that's what I call her lol . She is 2 hand fulls , I appreciate you brother, I really do and I hope God blesses you and your family this holiday Season and keeps you safe . Merry Christmas buddy
@@FishinNStuff Thank you Brother. "Cupcake " huh...? That's what my Drill Instructor used to call me. Lol. Please tell Cupcake, that Cupcake from Georgia said Hi. I later got other names, but I don't think I'll ever post them here. Lol.
Haha I know what you mean brother , a guy at work called me cupcake one time trying to be funny and I looked at him as serious with that crazy look I can give lol and said what kinda MAN calls another man cupcake,,,,, well needless to say he never done that again haha . But I just call her my cupcake she asked me why once and I told her cause I live her ass much as she loves cupcakes and she understood then . Cause that girl loves some cupcakes lol
You should make and sell them. Those are nice. I have me an idea now to redo mine. I used a t-post with 3/8” holes already in it every inch to mount mine. I used a 3/8” threaded rod through a piece of 3/4 conduit to stiffen it up but is screws into a plate and is a pain to get on and off.
Man I hope it does help you that's why I make these videos , if you need anything or have any questions I'l be glad to help . I appreciate it brother if you remake em send me a pic via emal please
Great rod holders. One thing I would look at to make it cleaner is weld the nut on the bottom or just drill and use a nut on both sides (top and bottom) to clamp the Fish Bite rod holders in. That way both nuts can be SS and match the SS holder. I have a set up I clamp to a post on the dock so I can remove easy, just have a bunch of holes so I can change spacing to run more or less number of holders on the bracket. Keep up the good work.
Thank you brother I appreciate you commenting man my buddy said the same thing lol . He said I should have welded the nuts on the bottom side , the channel wasn't really thick enough for tapping , I agree it would have looked cleaner but I was worried about the nut scraping off the bed liner when it gets tightened up , but that's what it's all about seeing how other ppl do stuff and improving every build , thanks for watching brother
Thank you brother it really worked it good . You ever have an Idea in your head then your kind of shocked when it works Haha. I appreciate you commenting man
Great DIY again my friend! I'm going to go check out your Camera Mount video next. I finally Picked up a GoPro from a friend and am taking your advice and jumping right into it. Happy Fishing!
Happy fishing man , your right , you don't get no where if you don't try . And sometimes we fail trying but that's just part id learning brother , let me know if you need any help
What a great diy… i may do something similar on the rear of my fishing pontoon. Really appreciate your videos, you’ve given me several projects that i will tackle over the winter, by spring i will be ready to slay the crappie here on High Rock Lake.
That's incredible Keith. You have a gift my man! Those rod racks aren't goin anywhere. Also, Any time you add kids as helpers, you got me hooked. :) Awesome Video. -Scott
another great idea and job. love watching your videos. after finding you on you tube and subscribing to the channel a few months ago, i have gone back and watched videos i didn't know about or just hadn't got around to watching; love them all.
Awww that's awesome I like how you thought about the angle so the pole handles won't touch👌 He was sure happy 😊 awesome work really appreciate it💯 Have a great week bud much mahalo🤙🏽😊
Your Hot Shoe Mount got me to thinkin. I have two downrigger mounts for winter fishin in the deeper lakes around me (trolling). Anyway, I'm thinking I can make me some slide in's for those for some rod holders, since I have one on each side. I really like it when I can get a twofer out of my equipment. Love your shop helper!
Brother I just recently stumbled across you. Man you pretty impressive with your work. I'm keeping tabs on you. Thanks for sharing and your helper is adorable to say the least. Many thanks
Thank you brother , my helpers a heart breaker lol . I appreciate the kind words too , I just like making stuff and that's where the name kinda came from . I make tons of stuff not fishing related but it's a fishing channel so lol . Thanks for the comment and for watching Sir
Jason Wilson it just takes practice , the longer you do it the better you get . I already subscribed to your channel, ol and my Daddy taught me everyone's a Sir until they dont deserve it lol so again thank you Sir , my fishing brother lol
I like it! I contacted you about a way to do a spread of rods for Crappie spider rig setup on the front of my ProCraft..... This setup is steel and the rod holders I have are plastic or maybe ABS, but now that I see the rod holders you used, I think they are way more sturdier.... So I'll probably change to those. And the best thing is, if I want to troll from the rear for cat fishing or even if I wanted to troll for panfish, I could just make extra hot shoe mounts, and move the rod holders to those mounts I wanted to use. Did I say "I like it" ? Good one! But I just watched the aluminum mounts for your SeaArk, and I like them, too. Wish I could weld aluminum. Maybe I could do these split hot shoe in aluminum with a bolted hot shoe. But maybe, too, the bed liner paint would withstand rust pretty well.
I think the bedliner will hold up , I mean 90% of trailers are steel and they hold up for years , now salt water is a different animal all together , the Aluminum adjustable rodholder mounts are not welded and you could still mount em on the hot shoe mounts so you could adjust em . Man I appreciate you watching brother
I think I’m gonna make some of these for spider rigging, I’ve got a war eagle 1548 that I use for everything from trolling crankbaits to duck hunting, so being able to remove stuff easily is important to me as well as equipment not taking up a lot of room, great video man, appreciate the help!
I thought about making some for spider rigging man just make everything smaller you won't need everything as heavy duty sho itll be cheaper and easier thanks for watching buddy
@@FishinNStuff absolutely love it! Finally picked up a boat too, I'll be throwing a video up of that soon! Needs some work but she's going to make a nice one!
Thank you Sir , I've got some cool DIYs coming soon , I'm trading boats and I'm making some stuff for the new one , thank you for watching commenting and subscribing brother I appreciate it man
Loved these brother ! Just subscribed ,I do lots of similar diy stuff for catfishing and boat set ups , you’ve given me great idea now for similar set up on my boat , I run tiller motor and like this guy don’t want the rack across the back !
Thank you for subscribing brother , I love to make stuff , if you have any thing you'd le ti se me make , leave a comment but I must warn ya a lines forming lol I appreciate it Sir
@@FishinNStuff 😁 she sure is, melted my heart and cracked me up sideways brother. Me thinks she just might be a chip off the old block there G-Paw. Jus sayin . 😎👍✌🖖🐟💥🛎
Awesome idea that's thinking outside the box P.S don't said it i can't go fishing for the next 2 to 3 months was filming at the dam slip on the rocks mess my back up
For that third hand when trotlining or juglining from a pontoon. And its portable and can be switched out with a regular rod holder. It comes in real handy baiting a trotline or taking off a cat. The top of the H with the roller PVC in-between the two uprights lets the trotline roll forward or backward. Here's another PVC hack utilizing a mounted rod holder on a pontoon. 14 inches (1 inch) of PVC that fits snugly inside your rod holder. Two hose clamps to fasten the PVC to the rod holder. then a I inch Tee fitting with a One inch X 6 inch PVC with a cap coming vertically from the tee then a 6 X 1 inch PVC coming horizontally from the same tee, then a 5 X 1 1/2 inch larger PVC placed to roll freely around the 1 inch PVC between the tee and the inch elbow. The one inch elbow is placed at the end of the 6 X 1 inch PVC with a capped 4 X 1 inch PVC vertically mounted to the elbow. The rolling PVC between the two uprights is especially helpful on holding the trotline up for baiting from a pontoon.
Yeah I work in Fabrication , I weld some but now days i run a Robot welder , I've done allot of it over the years , different jobs i mean . Thank you Sir and thanks for watching brother
We could try and build a boat out if plywood I guess lol . I'm mostly kind to everyone i meet but i wouldn't say i have tons of friends, well true friends, you know what i mean . But i do like to help ppl . I think you reep what you sow
I don't remember which DIY video you did but you had a plastic broom/mop holder from dollar tree for the rod lights on your boat, and it got me thinking so i made a rod holder inside my grand Cherokee and it is AWESOME.....you know what I'm saying?.........You know I'm saying
I've always thought this was Very cool channel and you got a great voice and accent, brutha. I would buy 2 of those rod holders today if you're taking orders.
Thank you I appreciate you saying that buddy . It means allot brother building the stuff is the easy part , I think I have more time in the video part lol
@@FishinNStuff Dude, I hear ya. I used to be a professional musician, I totally understand how long editing takes. Now, about my order for my rod holders... 😀
hulkhuggett I dont really sell stuff but if you really want some my buddy's a great fabricator and he might could do em kn stainless steel, just saying . But I'm not trying to sell him hes just really good
@@FishinNStuff I have been looking for something like the ones you built for a while. There is stuff on the market, but your design was more of what I am looking for. I'm definitely interested in buying some.
Great job great helper 👍😁👍 I really like that hot shoe mount iv been busy with a go kart been making short clips as I go I ripped it down and now I'm painting it then I have to get a clutch and odds and ends and reassemble it video soon. Wish I could record the stuff we do at work I work for the Motion Picture Studio Mechanics I'd lose my job I can't even video at the shop making my own stuff so I have to do it in my backyard lol Thanks for the awesome DYI video's and KEEP EM COMING BROTHER 🤙😁👍👍
Im with ya brother we can't record at work either , I did the same thing once to an old gokart for my kids I can't wait to see it brother thanks for commenting brother
Due to my superior brain and ability to make hard mathematics simple, I propose you make and sell these for $347.00 each due to the 27.9 hours of construction build time. A 6 week lead time would be appropriate. Hahaha, just kidding, this was a great DIY.
I actually spent a good bit of time making this video so your not off by far lol . But I don't sell nothing my job and CZcams keep me busy , I'm learning to be a better videographer from watching this awesome channel called Adventure Outdoors,,,, maybe you heard of it
Excellent idea with excellent execution. Yet I am always concerned when aluminum or stainless steel is not used in a marine environment. If nothing else but the bolt on base. Nevertheless, excellent solution to an anglers dilemma.
You could no doubt use stainless or Aluminum , but it's mostly about the idea of the base call it a prototype lol it's just a DIY sho no need to be concerned I'm don't sell anything
I use to be a welder, now retired. See that you have learned the welder's creeds: 1st) We Iron by day and steel by night, & 2nd) A grinder and paint makes you the welder you ain't. lol (PS, cute little kid, she must take after mama.)
She does , that's my grand baby. We always say the worst welder has the best grinder lol . 😆 I own 4 grinders lol . Mainly because I don't like changing stuff over
Yes Sir I appreciate you watching, I try and keep several ideas ahead of my videos , then I have to do my research build and film then edit. Man its like a job . But most hobbies are lol thank you for watching like I said it means allot brother
No Sir but that's a great idea . I do have one for back fishing czcams.com/video/JFHvpsescxI/video.html That's the link for it and I had a rod rack video for a pickup truck , but that is a possible future video . Thanks for watching buddy
Yeah baby!!! They are awesome, I put them to work yesterday and they worked great. No rattles, spread the rods out well and held tight on the fish. I can’t thank you enough and the review will be out soon!!!
You welcome buddy , I can't wait to see it man . I hope they stand the test of time for you
Yeah baby! Don't let the accent fool ya. I'm a Journeyman electrician and have used many tools throughout the years. But this man can teach us a thang or 3 . I'm just sayin. Keep an open mind and you just might save some money. I know i have saved hundreds.
The hot shoe mount idea was epic. Solid rod racks right there my friend. Solid as a rock.
Thank you buddy , they turned out about as good as I seen it in my head lol that's always a good thing
Solid work!! Best part of the video at 8:58. That's raisin right!
Yep she's my cupcake lol . I appreciate brother and I appreciate you watching too
That mount idea was bad ass. I would have never thought of that
I would have never thought I'd it either man , but this CZcams stuff got me to upgrading cameras over the years , i never knew what a hotshoe mount was but once I saw one I was like this things awesome lol . Thank you for commenting brother
There you go again. Mr. "I can do it better myself" up to your old tricks again. That was a heck of an idea with the hot shoe mount. I'm already sub'd to Glen so I'll see the review once he does it. They looked real good too!💪👍💯
Thank you Sir . I don't always do it better myself but it sure is fun trying too lol I appreciate it Bill
I really like the way you improve a design using your experience and what your buddies share with you. Like this rod holder you saw different ways to improve it. I also notice you pointed out on another video fishing companies have seen your work and decided to make gear and equipment copying what you have done your "hacks" are very smart! the awesome boat anchors you have made, and that zip tie the chain to it is so handy and solves a big problem. Love your ideas and humor great channel buddy.
Dude that's quality right there. That's the best Idea I've seen for that type of rack. Good stuff !
Thank you Sir, that idea really did work out well . I appreciate you watching brother
Fishin N Stuff I’m rebuilding a old 18’ Starcraft right now. Might need your insight on a couple things.
Any time brother , I dont know everything but I'll help you any way I'm able
Adorable little lady!! Video was pretty good too………
Thanks 🙏
Thank you brother I appreciate it
Ok this is weird! I just subscribed to your channel a few weeks ago, That's me in the picture with the rod rack aboard the Chatt Cats Fishing vessel. LMBO!!!!!! VERY nice rod rack! Love that it's removable!
Really you're talking about the picture Glenn sent me right , that is weird lol and kind of awesome at the same time lol , I appreciate you subscribing by the easy and watching brother
Yes Sir! Great Channel!
Okay, first off, me leaving a comment is like seeing Halley's Comet, a very rare occurrence, it doesn't happen often. But sir, I about almost cried from smiling when I saw your little girl wearing a welder's helmet, gloves, and holding a torch, saying "Yeah baby." I don't have children yet, but I have made the determination that should I have a daughter first, she's going to do everything useful with me that I would have my son. so there's that. Also, great job on "Thinking outside the boat". I hope this video gets the exposure that it well deserves.
Thank you brother I appreciate that . That was my grandbaby though . She looks like her mom and acts like my wife Haha sassy . Sounds like you'll be a good dad . Im thinking from you talking you may be a Fabricator too ?
Either way though I thank you for watching and leaving a Halleys Comet comment I feel honored brother
Fishin N Stuff Looking good for granpappy status, fooled me. Not a professional fabricator, just someone who likes to use whatever tools are at my disposal. Welded together an 18ft tall steel shade the other day, so getting better. Always wishin for better fishin, thanks for this gem!
@@theartofgun5344 hey man I didn't see your reply sometimes CZcams like of stinks at notification . Welding is one of those things you kind of get better at the more you do it . I'm no professional either but I have been doing it a little while lol
Now I see how you're doing all that terrific work, you're help is making it happen over there..... Nice Work Sir and Ma'am......😀
Thank you brother you know I appreciate you brother I sent someone to your channel cause they were wanting to know more about crappie fishing and you one of the best I know
I don't do that kind of fishing, but you had me interested and had to watch the entire video to see the process and how it turned out. Great job man!
They good for cats and striper, you could down size your rod holders and troll for crappie with em too . I fish for everything lol . I appreciate you watching brother. And commenting .
@@FishinNStuff I have seen people troll for crappie, it just would not work here since we have so much flooded timber. I do troll around the bridge, but I have to keep the line right next to the pylons or I do not catch them. Plus the Skeeter ZX200 might look a little funny with those holders! haha. I might however have to try that with my aluminum boat. Good stuff man
Asleep At The Reel Crappie Fishing TV I haven't quite figured out crappie trolling yet lol I understand spider rigging but it just because I never do it I guess lol , but I know people that are very good at it , I enjoy trolling for catfish and striper though
Asleep At The Reel Crappie Fishing TV tour skeeter would look funny with rod racks on it haha but it's an effective way to fish , I can't troll for crappie either , but I love trolling for bass , catfish, and striper . Well I troll for bass on my hobie any way . I had a Javelin Bassboat but I like the simplicity of the Aluminum boat , no carpet = easier to clean lol
@@FishinNStuff I can imagine. I hate fish flopping around on my carpet! :-) I do have a flat bottom that I might consider doing that with, you got me interested. BTW I guess the rod holders will not look at bad as the PVC stand I am about to make to put a dang-um umbrella on my boat. It is freekin hot here.
Well, I gottem built today....they turned out.... AWESOME! THANKS Keith for doing this video. I used some of your ideas on my build. I posted pics to the FB page. Thanks again!
Awesome , hey thanks for posting them so I can check em out
I Like that I was wondering how to put rod holders on my boat thanks for the video. Another great video. Keep the diys coming.
Thank you Sir, that's one way ti make one there's allot of opinions out there . That seemed to be the best way for Glenn though . I appreciate you leaving a comment brother . It's encouraging more than you know
You & your helper are awesome brother 😉😎. Love the way the rod holder came out. As always great video & thanks for sharing 👊🎣😎
Im ok I guess but my helper is awesome I agree lol . Thank you Sir for watching and always supporting me with your comments that means allot brother
Very sweet
Thank you buddy ,
That hot shoe mount was a great idea, after to was on the boat it looked really good. You do an awesome job on all your DIY’s 👍. Good little helper you have there too 👍. Keep em coming Keith, I enjoy watching your videos.
Well comments like that make em worth doing man really . I appreciate you watching and thanks again . My helper is dabomb lol
You’re very Welcome, “Yeah baby “ !! lol !!
Michael Rogers hahaha she's my cupcake!
I thought she did great 👍 You’re videos are always awesome Keith, keep it up !!
Thank you Sir
Thanks Keith,great video, that's some true craftsmanship!
Thank you Sir I really enjoy making stuff , I love watching other ppls ideas . I hope ppl find mine as useful, thanks for commenting brother
Well, it's going to be cold here in East Tennessee tomorrow. Guess I will be building these rod holders tomorrow! Thanks Keith from another Keith!
I'm really ready for spring lol
@@FishinNStuff same here dude. Hey I'm originally from NC too!
Nice and clean, like the way you think things out, shows good engineering.. thanks
Thank you Sir
I went over to Glenn's CZcams channel and subscribed on your recommendation. Thank you for the excellent and innovative CZcams video.
Glenn is a really good guy , I appreciate you watching brother
Well done. Maybe later you could put VHT High Temperature Spray Paint Engine Enamel Gloss Black SP124 paint on them & then use one of those 1600w heat gun to heat them up to 287°C (550°F) so you have baked enamel on the steel.
You know that's a great idea right there . Ive had tons of success with the bed lines but you know on the painted part I showed , where the rod holder slides in that work work way better I bet . I appreciate you commenting brother ol and watching it means allot
Bro you’re a freaking genius.
Thank you Sir I appreciate that , and I appreciate you taking the time to comment too
Yes indeed brother!!! You come up with some cool products... Im about to start putting in crappie invention request lol seriously 😂
Haha I'll do what I can , you know I got you lol . I appreciate it brother I got the kind of mind that wonders , if I ain't destroying Chinese reels im thinking up something to make lol
Here in down under Australia we call that style of rod holder a snapper rack. Cheers,Rob.
That's cool
Great job Keith, that is a awesome rod rack. I really need to get with you when I start building the Patriot Kat pontoon. I’ll be making rod racks and other stuff that you eye for fabrication and design might point me in the direction I need to go. Thanks for sharing another great DIY video. Keep up the great fun. God Bless America.🇺🇸
Thank you Sir, I appreciate it and I'll help you any way I can
You the man. Very well done as always.
Thank you Dustin I appreciate that , I appreciate the comments to cause it's encouraging brother
I KNEW you had to have help building stuff. You're the muscle, But Sydney's the Brains behind the operation. Lol. She's an AWESOME designer of rod holders. I'm gonna have more rod holders on my boat than I have rods for , and I have well over 30 rods. !Lol. "Tight Lines " Brother, and "Fish On" ..May God Bless you and your Family , and have a very Merry Christmas, and a happy New Year.
She's my Cupcake,,,,, that's what I call her lol . She is 2 hand fulls , I appreciate you brother, I really do and I hope God blesses you and your family this holiday Season and keeps you safe . Merry Christmas buddy
@@FishinNStuff Thank you Brother. "Cupcake " huh...? That's what my Drill Instructor used to call me. Lol. Please tell Cupcake, that Cupcake from Georgia said Hi. I later got other names, but I don't think I'll ever post them here. Lol.
Haha I know what you mean brother , a guy at work called me cupcake one time trying to be funny and I looked at him as serious with that crazy look I can give lol and said what kinda MAN calls another man cupcake,,,,, well needless to say he never done that again haha . But I just call her my cupcake she asked me why once and I told her cause I live her ass much as she loves cupcakes and she understood then . Cause that girl loves some cupcakes lol
@@FishinNStuff :-)
Great video
Thank you brother and thanks for commenting
You should make and sell them. Those are nice. I have me an idea now to redo mine. I used a t-post with 3/8” holes already in it every inch to mount mine. I used a 3/8” threaded rod through a piece of 3/4 conduit to stiffen it up but is screws into a plate and is a pain to get on and off.
Man I hope it does help you that's why I make these videos , if you need anything or have any questions I'l be glad to help . I appreciate it brother if you remake em send me a pic via emal please
Great rod holders.
One thing I would look at to make it cleaner is weld the nut on the bottom or just drill and use a nut on both sides (top and bottom) to clamp the Fish Bite rod holders in. That way both nuts can be SS and match the SS holder. I have a set up I clamp to a post on the dock so I can remove easy, just have a bunch of holes so I can change spacing to run more or less number of holders on the bracket.
Keep up the good work.
Thank you brother I appreciate you commenting man my buddy said the same thing lol . He said I should have welded the nuts on the bottom side , the channel wasn't really thick enough for tapping , I agree it would have looked cleaner but I was worried about the nut scraping off the bed liner when it gets tightened up , but that's what it's all about seeing how other ppl do stuff and improving every build , thanks for watching brother
Very impressive 👍🏼
Thank you brother that would look good on your boat haa jk , I appreciate it man
Those are awesome! That mount it the best I have ever seen! I need to try them for sure. Great build brother. I love the design.
Thank you Justine . I really liked em they turned it pretty good , I appreciate it brother
Wow those are awesome great job you channel is fantastic fish on
Thank you Sir I appreciate it buddy
Great fab job .
Thank you Sir I appreciate it brother
Wow, nice work man! That hotshoe idea is awesome! 👍
Thank you brother it really worked it good . You ever have an Idea in your head then your kind of shocked when it works Haha. I appreciate you commenting man
Great DIY again my friend! I'm going to go check out your Camera Mount video next. I finally Picked up a GoPro from a friend and am taking your advice and jumping right into it. Happy Fishing!
Happy fishing man , your right , you don't get no where if you don't try . And sometimes we fail trying but that's just part id learning brother , let me know if you need any help
@@FishinNStuff Will do! I hope to get out on the water Wednesday and just video stuff and see what comes out in the end...
It takes a lot of practice, but it's fun learning when you post a video let me know buddy
@@rhinohd I'm still waiting on a video buddy lol 😆 just saying
@@FishinNStuff No you're not buddy. This is Mark from Catfish and Crappie. LOL Happy Fishing! Did you subscribe to my channel yet? LOL
Sweet !! Awesome RodRacks. The bases make em
Jenny likes Fishing thank you ma'am
What a great diy… i may do something similar on the rear of my fishing pontoon. Really appreciate your videos, you’ve given me several projects that i will tackle over the winter, by spring i will be ready to slay the crappie here on High Rock Lake.
Thank you Sir , High Rock is definitely fulla Crappy
That is pretty dang cool! You are quite talented.
Brian Ray hey thank you Sir I appreciate that , I love to make stuff lol . Thank again for watching and taking the time to leave a comment
That's incredible Keith. You have a gift my man! Those rod racks aren't goin anywhere. Also, Any time you add kids as helpers, you got me hooked. :) Awesome Video. -Scott
Thank you Scott, I appreciate it brother . That's my grandbaby , my cupcake lol she's a mess
She was awesome.
Bait2Bend CZcams Star haha
another great idea and job. love watching your videos. after finding you on you tube and subscribing to the channel a few months ago, i have gone back and watched videos i didn't know about or just hadn't got around to watching; love them all.
Thank you , I appreciate that more than you know
You are 1 talented son of a gun. Id like to be sporting a set of those things on my boat. Great video
Don't give me da big head lol jk . I appreciate that brother I try . Thanks for commenting buddy
Awww that's awesome I like how you thought about the angle so the pole handles won't touch👌 He was sure happy 😊 awesome work really appreciate it💯 Have a great week bud much mahalo🤙🏽😊
Thank you buddy , I think he liked it too watch his review and we will both find out lol . I appreciate you watching and commenting brother
Fishin N Stuff Just watched he's review and yep he liked it alright😊 That's awesome my friend great Diy once again😊Mahalo🤙🏽😊
Man I love the work that you do, excellent job sir and I thoroughly enjoyed the video!
Thank you brother . I appreciate that . I always enjoy yours too buddy
to you and cute assistant well done!!!
Thank you Sir I appreciate that . Shes my cupcake lol
Your Hot Shoe Mount got me to thinkin. I have two downrigger mounts for winter fishin in the deeper lakes around me (trolling). Anyway, I'm thinking I can make me some slide in's for those for some rod holders, since I have one on each side. I really like it when I can get a twofer out of my equipment. Love your shop helper!
Thank you Sir lol
Those look great 👍
Thank you Sir. I appreciate it . I hope they work just as great too . I mean I think they will , I'm looking forward ti Glenn's review of em
That is some nice work, great design and I really like the hot shoe mount for quick on/off! Very Nice!
Thank you Sir I appreciate it and I appreciate you taking the time to comment as well thank you again
Brother I just recently stumbled across you. Man you pretty impressive with your work. I'm keeping tabs on you. Thanks for sharing and your helper is adorable to say the least. Many thanks
Thank you brother , my helpers a heart breaker lol . I appreciate the kind words too , I just like making stuff and that's where the name kinda came from . I make tons of stuff not fishing related but it's a fishing channel so lol . Thanks for the comment and for watching Sir
I enjoy the vids you got skills awesome
Thank you Sir , I appreciate that and thank you for watching em
you don't have to call me sir i got one of those CZcams channels but nowhere as good as yours
Jason Wilson it just takes practice , the longer you do it the better you get . I already subscribed to your channel, ol and my Daddy taught me everyone's a Sir until they dont deserve it lol so again thank you Sir , my fishing brother lol
My friend you are one hell of a Creator you should have a million subscribers.
Thank you Sir , I don't know lol I just have fun with it . I appreciate you commenting and giving a big head haha jk
Great video. I love watching your videos. Keep them coming..
Thank you Sir Richard . I appreciate that brother I really do
I like it! I contacted you about a way to do a spread of rods for Crappie spider rig setup on the front of my ProCraft..... This setup is steel and the rod holders I have are plastic or maybe ABS, but now that I see the rod holders you used, I think they are way more sturdier.... So I'll probably change to those. And the best thing is, if I want to troll from the rear for cat fishing or even if I wanted to troll for panfish, I could just make extra hot shoe mounts, and move the rod holders to those mounts I wanted to use. Did I say "I like it" ? Good one! But I just watched the aluminum mounts for your SeaArk, and I like them, too. Wish I could weld aluminum. Maybe I could do these split hot shoe in aluminum with a bolted hot shoe. But maybe, too, the bed liner paint would withstand rust pretty well.
I think the bedliner will hold up , I mean 90% of trailers are steel and they hold up for years , now salt water is a different animal all together , the Aluminum adjustable rodholder mounts are not welded and you could still mount em on the hot shoe mounts so you could adjust em . Man I appreciate you watching brother
I'l check my Email after work buddy
All I can say and I dont say much on CZcams any way , Is awesome!!
Well I'm glad you said it cause I appreciate buddy
Man I love your Chanel. Very smart idea to use a hot shoe mount. Excellent work
Thank you Sir I appreciate it buddy
Awesome video! Thanks
Thank you brother I appreciate it.
thats top shelf! really nice. your metal work is beautiful. perfect!
Thank you Sir I appreciate that brother
Great video man! Thanks for the tips
Thanks for watching man
Nice fabrication.
Thank you brother I appreciate that and I appreciate you taking the time to comment too man
I think I’m gonna make some of these for spider rigging, I’ve got a war eagle 1548 that I use for everything from trolling crankbaits to duck hunting, so being able to remove stuff easily is important to me as well as equipment not taking up a lot of room, great video man, appreciate the help!
I thought about making some for spider rigging man just make everything smaller you won't need everything as heavy duty sho itll be cheaper and easier thanks for watching buddy
Dude that’s bad ass. IM BUIlDING ME SOME!
I think you should , they turned out good , I'm interspersed in seeing Glenn's review on em myself , I appreciate you watching and commenting brother
Great video brother! Totally going to steal that design 😁
Thank you brother, heck you ain't stealing it's a DIY non copy right straight out of my head so your safe Haha. I'm glad you like it
@@FishinNStuff absolutely love it! Finally picked up a boat too, I'll be throwing a video up of that soon! Needs some work but she's going to make a nice one!
Aquatic Adventures I can't wait to see it , I'm subscribed and I'll click the bell so it'll notify me
You done a good job, I sent them yesterday,saw fish being caught with them too.
That's a real compliment coming from a true Jack of all trades like you Matthew and I mean that . I appreciate it brother
Great DIY! Keep it up your videos are great!
Thank you buddy , your videos are great too man , I appreciate it
Very nice! I'd like something like this on my Fishin' Barge Pontoon!
It turned out good
You did a hell of a job on the rod holders Puff. I know Glenn from somewhere I just can not remember where maybe it will come to me.
Thank you brother . I appreciate that man , it turned out pretty good . Glenn's a cool guy I hope he gets done good use from it
Appreciate the video and the idea. I just replicated these for my boat and came out awesome. Thanks a lot 👌
I like that rodrack too
Dude that's so cool!
Thank you Sir. I appreciate that . , and I appreciate you commenting too
man I loved them rod holder racks. I'll be makin some this weekend. also subscribed cause im sure you got some more good ideas,lol.
Thank you Sir , I've got some cool DIYs coming soon , I'm trading boats and I'm making some stuff for the new one , thank you for watching commenting and subscribing brother I appreciate it man
Loved these brother ! Just subscribed ,I do lots of similar diy stuff for catfishing and boat set ups , you’ve given me great idea now for similar set up on my boat , I run tiller motor and like this guy don’t want the rack across the back !
Thank you for subscribing brother , I love to make stuff , if you have any thing you'd le ti se me make , leave a comment but I must warn ya a lines forming lol I appreciate it Sir
Yeah baby 😁👍❤💥🛎 that's too awesome. Who said good help is hard to find ?
Thank you brother
Shes a cutie pie, that's my grand baby
@@FishinNStuff 😁 she sure is, melted my heart and cracked me up sideways brother. Me thinks she just might be a chip off the old block there G-Paw. Jus sayin .
😎👍✌🖖🐟💥🛎
Awesome idea that's thinking outside the box P.S don't said it i can't go fishing for the next 2 to 3 months was filming at the dam slip on the rocks mess my back up
Thank you Sir , I hate to hear that about your back man . Ol yeah did I heart you say you were filming cause in still waiting lol
For that third hand when trotlining or juglining from a pontoon. And its portable and can be switched out with a regular rod holder. It comes in real handy baiting a trotline or taking off a cat. The top of the H with the roller PVC in-between the two uprights lets the trotline roll forward or backward. Here's another PVC hack utilizing a mounted rod holder on a pontoon. 14 inches (1 inch) of PVC that fits snugly inside your rod holder. Two hose clamps to fasten the PVC to the rod holder. then a I inch Tee fitting with a One inch X 6 inch PVC with a cap coming vertically from the tee then a 6 X 1 inch PVC coming horizontally from the same tee, then a 5 X 1 1/2 inch larger PVC placed to roll freely around the 1 inch PVC between the tee and the inch elbow. The one inch elbow is placed at the end of the 6 X 1 inch PVC with a capped 4 X 1 inch PVC vertically mounted to the elbow. The rolling PVC between the two uprights is especially helpful on holding the trotline up for baiting from a pontoon.
Cool video. Im diggin the DIY. Its fun and unique. You got yourself another subscriber.
Thank you brother, I appreciate you watching man and even more that you took the time to comment
Buster Boyd landing!!!
No Sir it was south point landing , but you were close lol . I appreciate you watching brother
Appreciate you taking the time to share this build with us. Just curious are you a fabricator by trade you have a blessed day
Yeah I work in Fabrication , I weld some but now days i run a Robot welder , I've done allot of it over the years , different jobs i mean . Thank you Sir and thanks for watching brother
Man I love these! Would be even nicer if there was a fixture on it that holds the wrench that tightens the nuts on the rod holder.
You're a bloody genius. I'd say you have lots of friends. Friend....I need a rod rest and a boat to put it on friend what can you do for me ?😄😆😂😉
We could try and build a boat out if plywood I guess lol . I'm mostly kind to everyone i meet but i wouldn't say i have tons of friends, well true friends, you know what i mean . But i do like to help ppl . I think you reep what you sow
I don't remember which DIY video you did but you had a plastic broom/mop holder from dollar tree for the rod lights on your boat, and it got me thinking so i made a rod holder inside my grand Cherokee and it is AWESOME.....you know what I'm saying?.........You know I'm saying
I've always thought this was Very cool channel and you got a great voice and accent, brutha. I would buy 2 of those rod holders today if you're taking orders.
Thank you I appreciate you saying that buddy . It means allot brother building the stuff is the easy part , I think I have more time in the video part lol
@@FishinNStuff Dude, I hear ya. I used to be a professional musician, I totally understand how long editing takes.
Now, about my order for my rod holders... 😀
hulkhuggett I dont really sell stuff but if you really want some my buddy's a great fabricator and he might could do em kn stainless steel, just saying . But I'm not trying to sell him hes just really good
@@FishinNStuff I have been looking for something like the ones you built for a while. There is stuff on the market, but your design was more of what I am looking for. I'm definitely interested in buying some.
@@hulkhuggett where you live , I am sorry CZcams is terrible about not always giving you notifications. My apologies
Great job great helper 👍😁👍 I really like that hot shoe mount iv been busy with a go kart been making short clips as I go I ripped it down and now I'm painting it then I have to get a clutch and odds and ends and reassemble it
video soon. Wish I could record the stuff we do at work I work for the Motion Picture Studio Mechanics I'd lose my job I can't even video at the shop making my own stuff so I have to do it in my backyard lol
Thanks for the awesome DYI video's and KEEP EM COMING BROTHER 🤙😁👍👍
Im with ya brother we can't record at work either , I did the same thing once to an old gokart for my kids I can't wait to see it brother thanks for commenting brother
Dude these are just what im looking for but i have a little different idea but the bases are just the ticket.
Thank you Sir , hey the bases like of made em awesome. The racks weren't bad
Due to my superior brain and ability to make hard mathematics simple, I propose you make and sell these for $347.00 each due to the 27.9 hours of construction build time. A 6 week lead time would be appropriate. Hahaha, just kidding, this was a great DIY.
I actually spent a good bit of time making this video so your not off by far lol . But I don't sell nothing my job and CZcams keep me busy , I'm learning to be a better videographer from watching this awesome channel called Adventure Outdoors,,,, maybe you heard of it
The mount looks amazing! Im about to make one, but have the rack come up and across the back of the boat.
Nice work!
Great job man I really like that setup
Thank you Sir , i really like the Hotshoe mount idea it worked out great
That is awesome
Love it
Your helper is quite a welder
She an awesome welder lol
Excellent idea with excellent execution. Yet I am always concerned when aluminum or stainless steel is not used in a marine environment. If nothing else but the bolt on base.
Nevertheless, excellent solution to an anglers dilemma.
You could no doubt use stainless or Aluminum , but it's mostly about the idea of the base call it a prototype lol it's just a DIY sho no need to be concerned I'm don't sell anything
Ol buy the way man thanks for watching and I always appreciate it when people leave a comment , and yours was an excellent
Love your channel
Make two more and I'll buy them, seriously
I don't sell stuff honestly , I just like showing ppl ideas on different ways too . I appreciate it brother
Your channel is awesome brother !
Thank you Sir I appreciate that
I use to be a welder, now retired. See that you have learned the welder's creeds: 1st) We Iron by day and steel by night, & 2nd) A grinder and paint makes you the welder you ain't. lol (PS, cute little kid, she must take after mama.)
She does , that's my grand baby. We always say the worst welder has the best grinder lol . 😆 I own 4 grinders lol . Mainly because I don't like changing stuff over
@@FishinNStuff My "cute little grand babies" ain't so cute anymore. They are all in their late teens and twenties. Do you want some of mine?
Can you do a diy fishing cart thatll carry cooler poles tackle and whatever youll take to bank fish..
I have a lot of irons in the fire right now but that's a great idea , I'll put that on my list and be sure to work it in buddy
@@FishinNStuff i understand about alot of irons in the fire.. So whenever you can fit it in i appreciate it..Thank you brother..
Yes Sir I appreciate you watching, I try and keep several ideas ahead of my videos , then I have to do my research build and film then edit. Man its like a job . But most hobbies are lol thank you for watching like I said it means allot brother
Preston Frady I put it on my idea list so I'll get to it brother
Thank you sir
Need some idea for a John boat that has rolled corners on top for rod holders and a removable cutting board but space saving
sweet rod design! do you have a video for a pier rod holder ?
No Sir but that's a great idea . I do have one for back fishing
czcams.com/video/JFHvpsescxI/video.html
That's the link for it and I had a rod rack video for a pickup truck , but that is a possible future video . Thanks for watching buddy
Thank you