5 Ways to Print on Wood | DIY Image Transfer
Vložit
- čas přidán 31. 05. 2024
- Wood print and DIY image transfer are great tools to customize your woodworking projects or to brand your work. I’ll show you 5 different ways to print on wood and the pro’s and con’s of each of them.
=======
Tools/Supplies Used (affiliate):
Acetone - amzn.to/2yX0nEN
Nitrile gloves - amzn.to/2zUjT2G
Polycrylic - amzn.to/2nnstDd
Acid brush - amzn.to/2iFjayd
Liquitex gel medium - amzn.to/2zVTcL6
Foam brush - amzn.to/2yZtsiT
Spray lacquer - amzn.to/2zToNwN
=======
Join the Builder Club on Patreon and get Free Build Plans!
/ fixthisbuildthat
=======
SUBSCRIBE to my channel here:
czcams.com/users/fixthisbuil...
=======
FOLLOW ME on Social Media:
Instagram - / fixthisbuildthat
Facebook - www. ibuildthat
Twitter - / fixthisbuildtht
Pinterest - / fixthisbuildtht - Jak na to + styl
If you want a detailed write up you can see it here: fixthisbuildthat.com/print-on-wood-5-ways-diy-image-transfer/
Also, all prints were mirror image from a laser printer and normal multipurpose copy paper. I do not own an inkjet printer anymore so couldn't test those methods.
Hey Brad - I tried the acetone method (same brand of acetone you have actually) on walnut veneer plywood for a project and was completely unsuccessful - the toner didn't bleed at all. Curious if you had any thoughts or if you tried it on various types of wood. Cheers!
+The Cutting Bored what kind of printer was it? Laser or ink jet, home or commercial?
Fix This Build That Hi! It was a laser-jet printer from my office. Guessing that might play into it? I’ve done the technique before using inkjet to bleed logos but thought the way you did it was wayyy better and much cleaner. Cheers (and happy thanksgiving?!
Regarding polyacrylics method- do you think The polydacrylic that is the stain kind will work?
Fix This Build That what type of wood did you use?
Huge tip for anyone watching this. If you want a really clean transfer with all of the color transferred don't use paper. Use Label paper. What I mean is if you have shipping label paper laying around you will use the shiny backing and not the actual sticker. Print your image onto the shiny side. When you transfer it to the wood all the laser ink will transfer to the wood with none left behind. You do not have to wet it either. Just peel it off. It will work with inkjet as well. I still need to experiment with wax paper as I think it may work well.
I tried to have a image printed on label paper in fed ex on their laser jet printer but they said it would melt in the printer and ruin the machine. how are y'all doing this ? haha.
@Victor Poulin, which of the methods did you use? Acetone, polycrylic or gel medium?
@@Zaihanisme I used acrylic medium, made by Liquitex
@@shijimaorganites2893 They soooooo lied to you.
@@VictorPoulin I got a photo transfer medium by Modge Podge, and will do a test tomorrow. Hope it works!
Also, did you use water or just peeled it straight off?
This is by far the BEST comparison video for what I was looking for! THANK YOU!!!
I could not simply move along without telling you how much I appreciate the effort you put into this for the benefit of others. I am working on an idea for a craft project and wanted a decent method of transferring a simple image to a piece of wood. The polycrylic method is MONEY! Thanks again.
The clothes iron method is useful if you want to transfer an image that you are using as a guide or a sketch for pyrography. If you are into woodburning art I know some woodburning artists use that method for transferring images for that use.
This is when CZcams is at it's best. Thanks for sharing and teaching us this print method.
Thanks, James!
James Doyle it’s a stupid method
im going to do this
@@Fixthisbuildthat
You said that you would have a link in the description for your machine in Option 5. There is not one. I was actually looking for it specifically.
Can you use acetone yes but canyoy use alcohol ?
Another method to consider if you're doing a thick clear finish is printing on rice paper and embedding it into poly. The rice paper becomes transparent and anything printed on it remains sharp and crisp. Look for other videos for Rice Paper Under Fiberglass, which is commonly used on skateboards and surfboards. You don't need to use fiberglass and resin, the same method works under poly but requires extra coats to make the finish thicker than the rice paper.
In Kenya we say "Asante Sams" to mean, "Thank you so much". This is a one semester course given absolutely free? May God bless you!
Excellent assessment. I have to make several of these and was going with a completely different method before watching your video. Thank you!
That's EXACTLY the video I was waiting for ! Have been looking THE good process to do that, but never had a comparison between all of them. Thanks a lot and cheers from France !
I can’t tell you how many times I have rewatched this video or how many friends I have shared it with. Excellent lesson!!!!
I thought the CNC laser one was garbage! Am I alone here? Great video!
It's the wood choice, of course blank ink is going to be darker than burning though, if you want it burned in then the ink is cheating
Absolute garbage but he makes a shameless promotion for Rockler so he lies about the quality when we can obviously see for ourselves the complete garbage job that it did. He probably got the CNC Laser for free and his dishonest plug speaks volumes about his lack of integrity
I have a dirt cheap cnc laser...it prints great. It all about the design. You have to change stuff.
Laser engraving works awesome if you use a homogeneous material. Pine wood have hard and soft parts, so the laser will produce uneven results. Using something like MDF, for example, will give you a better result. However, I will have to look for some acetone and try that method.
@@alonsocambronero5663 it's all about focusing the laser....I engrave urns with mine. On all materials.
Wow, a life time of craftsmanship information in about 10 minutes!! Thank you! You also presented it in a way that was to the point. Didn’t waste any time. Yet gave all the good tips. excellent video production skills!
Thank you for this video! I'm from the Philippines and I can say that woodcraft has been part of our culture even before our pre-Hispanic era. However, we didn't move forward to these modern methods and it's rare to find mentors that can teach new techniques. More power to you and your channel!
MABUHAY! Im using his method here :)
Just used the polycrylic and it works amazing!!! The trick is to make sure the paper is real wet before rubbing. Thanks for sharing!!
Thanks for the tip! I’m going to test the polycrylic route and was wondering how it was working for people.
Did you use an inkjet or laser printer?
@@bratilicious73 I used a laser printer
I tried this method with no success on different type of wood, including plywood. What would be the best wood to use? Did I scrub to hard or used too much water. Most of the ink came off
Thanks so much for giving me several ideas for a gift for a friend of mine. He is retiring from his construction business. I look forward to seeing more of your work and suggestions. THANK YOU!
I like the acetone because it looks more rustic. Great video. Thanks.
This video is amazing! I was looking for something totally different (transfer ink on cardboard, not wood) but I stayed and watch your video until the end cos it´s greatly done. Either you´re a natural or a pro. Maybe both. Well done!
Hi I’m back ur technique worked
I’m sooo happy that ur not one of those CZcamsrs that fake or lie
For example 5 minutes craft
Thank you for such a great video. To quote James Doyle (2 years ago), this is when CZcams is at it's best.
I have used the toner + hot iron method for transferring printed circuit designs onto copper-clad circuit board material for many, many years! The trick to making this work is to either buy the special paper designed specifically for making circuit boards, or to simply use the backing sheet from a page of labels (remove the labels, then print onto the shiny slippery side).
Wow! The Polycrylic worked way better than I thought it would. Thanks Brad.
Yeah, I was really surprised too!
@@Fixthisbuildthat it's a A4 paper
Hey, how long do we have to wait for it dry/remove paper?
Do you know if I can use polycrylic on a painted surface?
The polycryllic seems perfect for transferring letters for wood carving. You get the letters transfered, plus the surface is sealed so you get less tearout from the router. I'm going to try this. Thanks 👍👍👍
How long does it need to dry?
Bring back money saving Mondays please
Really well done. Thanks.
2:55 Best one, I plan to use.
Woa! I can't believe how good the polycryclic looks. I've been thinking about doing a transfer onto wood for a while, this was super helpful! Thanks for making this!
You're wellcome!
Polycrylic is probably my favorite one to use. Simple and effective. Nice glaze coat and it looks beautiful. Thanks for this!
Can I ask, how long it will take to dry ?
Please reply
Thank you
How long does it need to dry?
Wow, this is so helpful! I've now made my decision for a Christmas craft, and it will be much easier than I thought it would be.
Fantastic video! This will make it possible to move forward on an art project I've had the idea to do. Thank you so, so much for sharing this!
The polycrylic looks the best! I'll go buy me some right away. Thanks so much for this!
Hello Brad, thx for the great video!I tested your method but instead of polycrylic I used wood glue, and the result was very satisfying
Beautiful presentation. Love the polycrylic. Thank you!
I must commend you on your presentation. Succinct in that you get straight to the point. Highly informative, again, you describe exactly the name of the medium you are using.
It makes me smile, you didn't just mention polyurethane varnish but went further in its chemistry/solvent, water based of course. Imagine the sticky mess had an oil based poly been used if no mention had been made?
And what a pleasure to know, great craftsmen are happy to share their secrets with the rest of us.
From Great Britain, a fellow craftsman, thank you.
I have watched a number of videos and this one was the best for explaining the options.
This was great! This helped me know which one is the best to use on wood. Thanks!
EXCELLENT tutorial. Clear and to the point. Well filmed too.
Thank you for this. I'm about to make some Christmas ornaments with wood and pictures and you just made things so much easier and you just saved me a ton of money.
Very slick. Wonderful video! Thanks for the side by side comparison!
thanks!
Thanks for the video. I have some experience with the heat transfer, and acetone method to metal. Laser printer (and some photocopiers) use a high temperature wax based ink that is very finely powdered. In the laser printing process, the toner is placed on the paper, then it passes by a "fuser". The purpose of the fuser is to melt the toner onto the paper. If you deactivate (sabotage) the fuser, the toner is clearly still powder and smudges easily. I sabotaged a used laser printer and would make transfers to copper plate. I heated the plate with a paint stripper hot gun from the back, and then latter used a large printmaker's hotplate that was 24" by 36" square and capable of temps over 400 degrees. After that I would etch the plate in ferric-chloride acid to etch the copper plate. Wash it all off with acetone, then rub ink onto the plate and run the inked plate and paper through an intaglio printing press.
You explain it so well and no beating around the Bush great job
Thank you soo much for this video! Was just asked to make something for someone and I wanted it to look “printed”. Exactly what I needed!!
Thanks for the video! Every method is perfectly explained!
You're welcome, hope it helped!
Yes, I agree
Interesting stuff...I never knew that polycrylic could do this. I agree with you...that was the best looking one.
+Bruce A. Ulrich yeah, and we already have it on hand!
Fix This Build That Brad, one thing about the iron technique is that you need to print your image onto parchment paper or wax paper I stead of regular laser paper to facilitate the transfer.
I love the polycrylic method though... Gotta try that one this afternoon!
Good tip, thanks!
Thank you for saving me the hassle of trying acetone. I was going to buy some to label my desk project, but I remembered you made this video. I could not remember which was your winner so I just watched your video again. And on the plus side, I already have polycrylic in the shop!
This is awesome! Going use the fifth method because I think I saw one under my blind grandma's bed. All seriousness, method is best! 👍🏼
I’m super impressed and surprised with the polycyclic, never seen that technique before.
Yeah, it's so attainable for woodworkers!
The polycrylic was by far the best. You would have to have serious money for that Rockler printer, for that price and quality, you could have a branding iron
Same, any thoughts on if it would work with other sealers like spar urethane?
I wouldn't use oil based just because of the fumes personally. But I bet it would work
Fix This Build That
If you do the polycyclic can you add a stain over it afterwards or will it mess it up?
does the poly work with w/inkjet?
Thanks so much. Perfect for transferring patterns to wood for scrolling and wood burning!!
Love the Polycrylic, I can't wait to try it.
I use Liquitex liquid matte medium (instead of a gel). Whenever you use this transfer method it will always have a bit of a paper haze after the first "scrub". Just dampen a cloth, your fingers (or your toothbrush) and GENTLY rub in circular motions to remove as much of the remaining haze as possible. The areas that need the most attention, I find, are larger black areas. Finishing with a matte, satin or gloss varnish will bring the photo to life.
a little contribution...try printing an inverted image over waxed paper (like the back paper of Avery envelope tags) with an inkjet printer, then put the paper over the wood in the same way you show...the results are awesome, color printing on wood. I use this method to print the company logo and the image of new mechanical spare parts packed on wood boxes, the final look is absolutely professional... and...every waxed sheet can be used several times ( just clean the few remains of ink from the waxed face of the paper with a napkin before print again) ( on rough wood try with some fine grain sandpaper first, just a few )by the way...this method is a very basic version of Offset printing.
cheers from the other side of the world !!! ;)
Thanks for sharing these great ideas and for inspiring a newbie here! All but the last method look very simple and inexpensive too.👍
This video was so helpful. Thank you so much for making such an informative video. Literally all my questions answered. You're the man!
Great video thank you so much for sharing!!!!
I'm sooo schocked !
Sooooooooooo easyyyyyyyyyyyyyyyyyyyyy !!!
arghhhhhh !!
;-)
Rémy (stll from France)
;-)
This video was great and informative. Much better than the four I watched before. Which were all women. So take that for what it's worth.
I agree. I like the polycrylic best... I'm going to try one myself. Thanks...
Wow, what a great video! I had no idea you could transfer images to wood so easily. The polycrilic does really look great and that will be my method of creating some really cool stuff! I thought I might try a iron buy using the printed transfer sheet that are used to iron color images onto t-shirts. Also, I wonder if laser printed color images would transfer onto wood just a cleanly as the black printed images. Thanks so much for the video!
Much better then mod podge. And every woodwoker has some water based laquer. Tyvm
I don't make comments very much but I have to said this is one of the best videos I have seen. Thank you.
Ink jet deposits ink droplets. Laser printer MELTS powder. Laser printers generate more heat than ink jets. Might be something to consider when using waxy label sheets (with paper labels removed)
Thank you so much this was so helpful ! High fives !
7:05 Acetone makes the job more vivid and faster. And cheaper, definetely :)
Thank you for such an in-depth video; this is going to help me so much.
One of the most useful videos I've seen. Thank you so much for this!
Great channel name.
I'm super impresses with your presentation. You were organized from beginning to end; very professional. I actually learned things from your video and looking forward to watching more of your work.
1/3/2019
huh! I wouldn't have thought that Polycrylic would have worked so well. I"ll have to remember this! Nice job!
thanks!
Beautiful, organized workshop
Good 5 ways, but No.3 is the best, It's brightly, strong color.
Thanks a lot for sharing us that ideas.
A second pass with the laser de-focused (1/16" to 1/8") will darken up the image very nicely.
That’s what I was thinking, if it’s laser accuracy, couldn’t a couple passes work to burn the image deeper?
No need to watch another video. Great job, thank you!
This is awesome! Really helped with the yoga mat holder I'm building, Thankks again!
Great tips, thanks for sharing! Going to try the poly on my project.
Super informative. Thanks Brad! I need to figure out what’s wrong with my laser so I can get it working again and try one of these methods.
Laser printers are the only way to go!
Can you use regular computer paper/ink?
Print on the gloss side of an avery label sheet (sticker labels removed) and use with gel acrylic method. Easy peel off once dry and perfect transfer. No water or toothbrush required.
I've done a LOT of image transferring and I can tell you that in this instance, the poly will be just as good and cheaper per oz than the Liquitex. I'm also an artist and Liquitex is expensive!
However ... the Liquitex (I haven't tried the poly) will also transfer inkjet images, though not as well because inkjet ink doesn't sit on the surface like toner. Same process, but works better if the image has been printed on magazine paper. The type of paper you use is also important. Must use high quality with inkjet so that it's a smoother surface you're printing on as well as a higher density of pigment.
But now, all these years later, you can get waterslide paper and not have to worry about all that.
Awesome video well explained to the smallest detail and the different methods used and compared are very helpful and was really surprised to the outcome 😊well done !
2 questions: 1. how long can you wait after you print the picture? (does the ink have to be hot, or could you wait until the ink dries?) 2. does this work with colors?
Wondering the same thing.. never seen anyone answer.. does it need to be right off the printer?
If you're going for the antique look, I think the acetone looks best.
Wow!! Thank you. Love the ideas. Excellent work
Thank you for showing many different ways to transfer photo on wood, for comparison.
Acetone sounds like the cheap/quick/rock-n-roll option. You can also use lighter fuel to take images off newspapers, by first soaking the newspaper image, then rubbing it with a pencil onto the surface desired - added advantage of looking "hand-drawn" - SWEET
@Dominic ohhh my goodness.
How about you run the CNC laser twice, would it make the image more even/darker/better?
Simply amazing! Thank you for sharing your work and ideas!! You got yourself a new subscriber🙌
You've just inspired so many ideas. Thank you!
Thanks so much for the tutorial! I was excited to already have the acetone, soft gel and polycrylic on hand and now I can't wait to try it out. This will be great for making tiny mural "replicas" for CZcams giveaways on my art episodes.
How did it go? Which method was best for you?
هل يمكنك قول اي نوع من الاسيتون يستخدم فانا استخدمت اسيتون مسح طلاء الاظافر
"Get out there and build something awesome", what a great closing line. I'd like to keep typing this message but I need to get off youtube and go buil..................
Excellent! I'm going to use this to replace the decal on an old Craftsman scrollsaw. Thanks!
I love these tip videos. I’m gonna try that Acetone trick this weekend. I had no idea you could do this. Kinda blew my mind. Lol
Great video! I've done a few transfers to wood and I've found a great method to use with the clothes iron. Save the paper backing from shipping labels or any kind of labels you run though your printer and use the backing paper to print your images on. Then the high heat setting and the transfer will be a success! I've used both inkjet and laser to print the images and both have worked for me using the backing paper. I found pictures with an inkjet transfer really nice this way! Using wax paper as some suggest just introduces a wax film into the ink. Not good!
Thank you! I think i want to try this as a method for getting my basic outlines onto wood for pyrography projects
Freezer paper works really well..Ive uses it for transfering manytimes :-)
Don't use Waxed Paper, use Butchers paper, which is not quite the same thing, but haven't tried it yet.
I know this is a bit old as far as vids on YT but I do have to wonder how it does with color. Being a Photographer for over 30 years I have never found a good way to get my work on Wood that was either Economical or looked good for long. May have to try it.
Nice compilation. Thank you. Hello from Turkey. 👍
excellent video. Thank you. I'll try the polycrylic.
If you ask me, the laser one isn't only expensive and cheating, but has also produced one of the worse results :)
Nice video, upvote is due.
engraving pictures is hard. this guy simply doesn't have his super high powered laser dialed in propperly.
a lower powered laser with better control. (laser power resolution) would produce better results.
speed and power also change the color. it could have been the blackest one of all for example.
and the image prepperation required to get a decent photo engraved is insane. you need to be a veteran photoshopper. and a veteran laser engraver so you know what you want for your current material.
and if he was an expert in each method. then they would all look identical. with the added bonus of the laser engraving beeing actually engraved. so you can feel it and it's resistant to wear.
Defenitely
Awesome video! Very thorough but not wordy. Great job! Thanks :)
Nice! Thanks for doing this demonstration. Very helpful 👍
Amazing and helpful, thank you so much! Would this technique work with a color print?
I did the gel medium for a family picture and it came out really good. It's a pain to take the paper off but it does work.
i really loved that but can we print colored ink on wood by the third solution
Yes! Works with color from what I'm told
Fix This Build That only color from a laser printer?
Same question here.....all this is cheap - so let's just go try it!!
Loved this update!!! I love doing these things!
Not having any of those products I tried Weldbond, let t dry for about an hour. Worked fantastic. Thanks for the video.