Part 1-Model Car Building Basics-AMT 1950 Ford Convertible
Vložit
- čas přidán 27. 07. 2024
- Every big project has to start with defining the scope of the build. In this episode I show which parts I will be using and show how to clip the parts from the sprue trees.
This entire series will be created for the beginning modeler who has already built a few model kits and has a basic knowledge of tools and techniques. Please Please Please let me know if you want to see more detail or explain more of what I am doing. I am a couple episodes ahead of this at this time and can change the pace.
For the CZcams algorithm: AMT ROUND2 MPC Johan 1950 Ford Convertible Tamiya Hasegawa Fujimi Revell 1/25 1/24 scale model car building airbrush hobby Luka Mokei Plamodel Plamo HPI
Thank you for all of your support, I am truly doing this series for YOU my viewers. Without you I wouldn't be on CZcams. Please make sure to like, leave me a comment and share this video with your friends.
Here’s a link to the mixing cups I use:
[400 Pack - 1oz] Epoxy Resin Mixing/Medicine Cups With 100 Bonus Mixing Sticks For Mixing Paint, Stain, Epoxy, And Resin - 1 Ounce (30ml) Graduated Plastic Cups (4 Sleeves) - EpoxyStix a.co/d/bLdXbPt
Follow me on Social Media:
Facebook: James Tester
Instagram: ScaleModelExperiment
Email: ScaleModelExperiment@gmail.com
Thanks again,
James - Jak na to + styl
Just found this site, and subscribed. At 66, I've been modeling for some time, since about ten. I started really getting into car kits about three years back. Been doing more cars of the 1930s, 40s and 50s lately. I need to add this kit to my stash. 😎👍
Welcome back to model car building. I’ve been doing this YT channel for just about 3 years now and model building for 25. Enjoy the series 👍
She's looking good
Thank you Travis for watching👍
Very cool car James. Will be fun to watch you build the 50. Ron
Thank you Ron, enjoy the journey of the build.
Awesome it looks good all mocked up in white ❤
Hi Shawn, there are a bunch of things I found to fix with the white glue mock-up. You’ll see next week. I appreciate you watching and following along bud👍
Thanks for sharing the prebuild video with us Mr James!!!👌👌👌
Absolutely Willy, I want to document the whole process start to finish. Thanks for watching 👍
Ok jack !
😂😂🤪🤣🤣
Can't be excited
🛠👀🤙
Thanks for watching OG, more to come brother 👍
Looking forward to next week!
Thanks David for watching👍 I think you’ll really like episode 3 & 4.😎
Great video make. Look forward to see next one. Have not so much of this in Norway. Thaks again for great builds and good videos. 😊😊😊
Thanks so much for watching and following along. I hope you enjoy the journey.👍
Oh my gosh! Talking to that donkey was hilarious! 😂
Thanks Mike, you’re the first to mention him. He will make more appearances in the future.
Awesome video good to see your process.
Thanks for watching Horton, I hope that you enjoy the journey 👍
Thanks so much for doing this! Gonna be awesome to follow!
You’re welcome Motionboy, I appreciate you watching and commenting.👍
Awesome James, Anxiously Awaiting Next Week's Episode of This C😎😎 LLL Series. GBA 🤗 Gary.
Thanks Gary! I think you’ll really like episode 3&4. I appreciate your support bud 👍
AWRIGHT 🏆🏆
Great video. Can't wait for the next in the series.
Thanks again Mike, next video coming tomorrow (Friday).
Nice tutorial. Excellent presentation of starting a model kit. Thanks for sharing.
Thanks for watching Michael. I appreciate the support 👍
Okay... I had to go back and watch the part where you sprayed the chrome parts. I zoned out for a minute and thought you sprayed them silver....only because the spoon was silver. Okay.....I see what you did there.
I've always liked your idea of assembling the entire car with white glue to check for fit issues, but I must admit I'm short on patience when it comes to that. I would imagine many modelers are too. Where can I buy some patience? Lol. I'm looking forward to this build series. 👍
Thanks Rob for watching, I really want this series to be comprehensive enough for anyone who wants to build to follow along. Some basic some intermediate in the mix. The white glue assembly is something I started just a couple years ago. I got tired of bad fitment of nicely painted parts. It’s worth the time spent. When you find patience for sale, see if they have focus because I need that.
very interested in seeing how this is going to turn out. thanks for the video!
Thanks for watching Sean, enjoy the journey.
Great video, I really enjoyed seeing your thought process and methodology. I’ve only sprayed flat clear to knock back the chromed parts, adding Tamiya smoke is really interesting, I’ll have to try it. 👍
Thanks for watching Antithesis. To be honest this is my first time trying to smoke the clear. My friend Jeff Bloomhuff suggested it. I like the look and they are protected from fingerprints now. Enjoy the journey bud, lots of tips coming soon.
Nice unboxing and parts review.
Thanks for watching David👍
Looks like a nice kit. Should be a fun build. The mock up is really cool.
Hi Larry, thanks for watching and commenting. The fun is in the prep, painting and assembly will be a breeze.
Nice video.
Thanks Marcelo, I appreciate you watching👍 I’ll get your sticker out soon bud😁
@@ScaleModelExperiment
No problem, and thank you.
Nice work there James, so glad you're back making fully detailed videos of your builds 👍🏼 wow this kit has so many parts, never thought there would be so much to work with ☺️ looking forward for the next update on this 👍🏼
Thanks for watching Karl, I hope that you enjoy the journey with this video build. The 68 pieces I’m using will all be super clean and fit perfect before I apply any paint to the kit. 👍
Great Video!!! Looks like your off to a Great start. I like to clear over my chrome to. I usually do the whole tree. I've Never heard of that clear before??? I like the idea of adding the smoke. I'll be watching
Thanks for watching Mike, Gaia Colors clear is good stuff and I’ve had the bottle for a long time. I mostly use 2k for bodies so lacquer doesn’t get used up. Adding smoke was my friends idea and I like the way it looks.
Hey James, so glad to see you've started working on this one....Looking forward to see the mock-up stage with the white glue. I knew you're using it but never saw how. I was always afraid that if I leave the PVA on the parts for a longer time ( with all the fitting, plan all kind of modifications ) will be difficult to clean it in the end. The mocking with tape it's so annoying when it comes to small parts .....Anyway, thanks for sharing your process. See ya soon
Hi Cristian, the Elmer’s comes off super easy when it comes time to disassemble the mock-up. No worries at all. Thanks for watching and supporting the channel.👍
Great series idea and will be following closely. Love your build style
Thanks David! I appreciate you watching and supporting the channel👍
I have been building models since I was 12 I'm 76 now. Who says you can't teach an old dog new tricks! Very cool stuff. Question: What brand of Airbrush do you use?
Thanks for watching Garry, I’m glad you enjoyed the video. I use a Master brand Airbrush from Amazon. It’s the G79 which is a hybrid single dual action trigger airbrush. I can control the amount by how far I pull the trigger but cannot spray just air.
Hi James, little late, but i joined to watch your build series, thanks for uploading ! do not follow jackass tips 😂
Hahaha Oleg, you are only the second person to mention him. I admire your work and would like to see you do a similar series someday.
👍
Thanks Ronny 👍👍
I could use the cinder blocks....😊
I’ll keep you in mind if I decide not to keep them.
Following along, I cut my sprues so wide I wound up in a Tamiya kit. Whoops...
C’mon James, where’s the challenge with that? Lol. Thanks for watching👍
Definitely looking forward to this series. I'm surprised and proud of you for taking on an old tooling kit like this! I think it may be a challenge and a good learning platform as it's not an "assemblers" kit. My current build is definitely in a different direction than yours! 😂 I like Mod Podge for mock up, it has a bit more body and hold than the Elmer's but still breaks down and comes off easily. Seems to be a nice balance.
Wow Adam I've NEVER Thought of Using Mod Podge 🤔🤔 Thanks For Sharing, I'm Gonna Try It . GBA 🤗 Gary.
Thanks so much for watching Sodak, I don’t hate doing these kits, it’s actually a challenge to make them into something nice. You’ll see in the next episode how my Elmer’s worked out. 😁
@@ScaleModelExperiment Elmer's usually does okay if you don't need to handle too much or rough handle like I do! Lol The mock up looks good and again look forward to rhe series.
Thanks bud, there were some suprises along the way that I’ll take care of before primer.
Great video James. Like how you arrange everything, in order to start process?
I do a similar process, to where I go through all the sprews and pick out what I
want to use. THEN I sand all of the seems & drop marks. THEN I check for fit
errors. I usually use an old hair dryer, for straightening parts! I don't use the white
glue though? Actually I still use the Testor's model glue, for plastic parts... Can
you suggest a better glue? Appreciate your videos dude!
Hi Jeff, I think most people do it your way. For any kit that isn’t a Tamiya kit I find it is necessary to prefit the whole thing in white glue.I’ve built my share of kits that needed adjustment in the last moment.
I’ll take the custom parts .
You and Ray Blasee will have to have a thunder dome style battle for them. Hahaha
@@ScaleModelExperiment Ray can win. I all ready have them . Would have just added to the others.
One minor detail to enhance basic kit. If you go bucket seats change their mount so seats are staggered and the seat belts could be thinned down too. Just sayin'.
Thank you for watching, I am limiting myself to the pieces that came in the box. It would be easy to start switching out parts for better components but the heart of the build is to make something beautiful using basic modeling techniques. Check my box stock 70 Roadrunner build. It’s contest worthy but still box stock.
Great video. Interested in seeing how you build this kit. I have the 1999 (Millennium) version of this kit and it has no drag anything. When did the drag version of this kit start? I was shocked to see a straight axle in this kit. Just curious.
Hi Modelnut, thanks for watching. I’m not sure when then they added the drag parts. I have a friend that has an original issue kit that has a full Carson top for the chopped windshield. I’ll post the next video in the series tomorrow Friday. I hope you enjoy the journey.
I hear modelers complaining about God Hand nippers breaking. I'm guessing that they're using them on too large of a piece of sprue. I have several different nippers for different purposes. And, that part you didn't know what it was reminds me of what they put in the center of a take out pizza to keep the lid off of the toppings. Man, now I'm hungry for pizza!
The precision ones I use cut do well there is almost no cleanup afterwards and there is no pop it’s just a clean cut. I think I paid $25 for them. Money well spent I say.
Where did you get the measuring cups? The thing used to meter out the thinner? Do you use lacquers most of the time? I have been trying to use tamiya acrylics.
Hi John, I buy the measuring cups from Amazon. I get them 400 at a time and only use them once. Kinda wasteful but they are cheap. I’ll put a link in the description. I use lacquers and acrylics mostly. I thin everything with Mr Hobby Leveling Thinner which makes the acrylics behave like a lacquer. I can mix lacquers with acrylic that way too.
🤓👍
Thanks for watching Model Cars👍
James, what's the rational behind cutting the parts from trees and then cutting them again with the precision nippers? I always cut them once with the precision nippers unless it's a very big attachment point. Then I'll use my Xuron's and know I'll have more clean up.
I like to use the cheap ones to cut the parts and trim them afterwards. It’s just the way I do it.. thanks for watching John, I appreciate the support 👍
Why do you not want to touch chrome parts? I assume it has something to do with skin oil.
Once you touch them they start getting scratched and you can’t polish them so I try to avoid touching them.
You forgot the front metal axle.
Spoiler alert… I won’t be using that… stay tuned.
Is this the round 2 version? If so I need to build a kustom version with that canted front end.
Yes, that is the correct version.