The weirdest fault I have seen on a Henry Hoover! HVR200-22
Vložit
- čas přidán 23. 10. 2021
- Numatic henry hoover HVR200-22 vacuum cleaner
This one had a cable that was so badly abused it had burnt itself through!
Donate: paypal.me/bootsowen
Support: / bootsowen
www.amazon.co.uk/shop/bootsowen
You can buy tools and parts, or things you were going to buy anyway from Amazon through the affiliate program and I may receive a commission for the sale. This has no effect on the price for you. The links used are affiliate links. As an Amazon Associate I earn from qualifying purchases. - Jak na to + styl
Newer henry hoovers had a red indiciator to tell if it's plugged in
Great videos you must have about 20 of these henry hoovers now lol, im starting to collect them meself now aswel getting them dumped at the electrical store recycle bins.
3:46 wow I haven't seen that much dust come out in such a strong motor you should get that fan cleaned those are the most best motors numatic has created
Nah old 70s- early 90s motors
Thanks B...
I love your vids
2006 HVR200-22 from week 10
Wow the henry eorks
13 amp fuse, but you can use 5 amp if possible
The cable issue was exactly the same problem on a machine I found by the roadside!!
Did you fix it.
if that machine has been running for a long time with its cable not fully unwound the cable would get hot possibly causing this fault
Lost a caster.
06 means 2006
i think the blackness of the copper is water getting into the cable, old cars have this problem with harness wires going black too.
But ive never seen the copper strands fall to bits before.
Total misuse of insulated cable (someone had no patience with cable jams).
My mate has a henry, the daft sod left it in a shed and it didnt work when plugged in later.
I found the carbon brushes had been damp and they were stuck in the boxes.
People just dont have common sense.
have you every replaced the switch on one of these? found out the oem switch is different to the original took a few hours to work out what was wrong.. i am no expert but took a few of us at repair cafe to work it out and the owner went home to get the original switch which then pointed too the issue of the orientation of the oem switch made a big difference.
I have done a few videos on henry switches, have a look at my henry/numatic playlist
HOw COME U CAN HAVE ON OF THOsE HENRYS
It's from 2006
06 means it was made in 2006
That's an older Henry Mr.B. a Numatic collector might be interested ? ... You know there is a collector's site on facebook. Odd flex rot issue.
I think there are collectors of everything. Bricks. Milk bottles. Coins. Why not Henry’s.
@@bootsowen Yes Mr.Boots, that of course is correct. But it has been my observation that said Collectors generally specialise in O-N-E spacific type of collectable !!!! 😂🤣😂😃😄😅😆😉
@@bootsowen there are a lot of Henry Hoover collectors and vacuum collectors in general
That’s the same model I have!!! 2006 model this one. Mines 2005.
Why does it have the red switch on top?
@@bootsowen they did away with the rocker switch on the side models in 2002. These had the push button spring loaded switch on the top to make the switch more visible for those who can’t see very well I think. But the rest of the Henry was the same (same vents position) as the previous models and earlier, from 2002 till mid 2004, these had the 1100w UDS motor with no hi/lo switch. In mid 2004, they introduced the hi/lo switch and a slightly different 1100w motor (sounds very similar to the 1200w motors) the 1200w motor was Introduced in late 2004.
However, in June 2006, Numatic changed the switch design to having them on top. (Red on/off rocker switch, green hi/lo switch) with the vent located centrally on the back of Henry.
That design continued on the standard Henry’s until October 2008 when the Autosave Henry’s (HVR200A) was introduced. But the older switch assembly from 2006-2008 continued on the HenryXtra till 2010 and on the HenryMicro until 2014.
The Autosave feature was discontinued in 2014, and Henry was made single speed with an indicator light with a 580w motor, but that model was only made for 3-4 months until they reintroduced the older switch assembly from 2006-2008. But with a 620w motor. But in 2016 they did away with the Hi/lo switch again and they reintroduced the single speed models from 2016-present.
Sorry for the essay lol.
The essay is cool with me! it is a big step from a 1200w motor to a 580-620 motor, half the power.
@@bootsowen not really with all the airflow path improvements and optimization
Also how tf does the comments say one week ago when this came out like 2h ago
06 mean it's made in 2012
Nah bud if it was made in 2012 it would have a autosave pcb system these were made from 2004 to 2006 when they were in production
I want my comment to get pinned