Restoration old 24V DC Motor - MY6812 / Eski DC motorun yenilenmesi

Sdílet
Vložit
  • čas přidán 5. 09. 2021
  • 🌟SUBSCRIBE► bit.ly/2iCvKsb
    Hi everybody. I restored the 24 Volt DC motor also known as MY6812. The engine was very rusty. The bearings were worn and running very noisy. I replaced the bearings. I cleaned the dirt off the magnets and made them stronger. Now the engine is quieter and more efficient. However, the balance problem in the rotor is not solved!!!
    Merhaba millet. MY6812 olarak da bilinen 24 Volt DC motoru restore ettim. Motor içerisi çok paslanmıştı. Rulmanlar aşınmış ve çok gürültülü çalışıyorlardı. Rulmanları yeniledim. Mıknatıslardaki kiri temizleyip daha kuvvetli hale getirdim. Şimdi motor daha sessiz ve verimli. Ancak rotordaki balan sorunu çözülmedi!!!
    Puller / Çektirme: • Amazing Ball Bearing P...
    Voltaj: 24V
    Anma gücü: 120W
    Yük akımı yok: 0.6A
    Yük tohumu yok: 3500rpm
    Hız torku: 0.42N.m
    Hız hızı: 2750rpm
    Oran akımı: 7.4A
    Verimlilik: 70%
    Voltage: 24V
    Rated power: 120W
    No load current: 0.6A
    No load seed: 3500rpm
    Speed torque: 0.42N.m
    Speed speed: 2750rpm
    Rate current: 7.4A
    Efficiency: 70%
    My most popular videos - En popüler videolarım
    Nitro engine - www.youtube.com/watch?v=O138n...
    Drill Motor Car - www.youtube.com/watch?v=S0n4t...
    Gear Fix - Wiper Motor Repair - www.youtube.com/watch?v=pfj4H...
    Helicopter Car can not Fly!!! - www.youtube.com/watch?v=5M4Pf...
    My Circle Cutter - www.youtube.com/watch?v=dIe_6...
    Useful Grinder Hack - www.youtube.com/watch?v=OJyAo...
    Adjustable Table Saw - www.youtube.com/watch?v=jY_R7...
    Nitro Engine Moto Start - www.youtube.com/watch?v=wwnMP...
    DC Motor Direction -www.youtube.com/watch?v=IsaI7...
    e Bike Gear Chain - www.youtube.com/watch?v=3FMjb...
    Subscribe, like, share ...
    Abone olun, beğenin, paylaşın...
  • Jak na to + styl

Komentáře • 24

  • @sacitgurbuz7809
    @sacitgurbuz7809 Před 2 lety +1

    Restorasyon değil de bakım yaptık daha doğru olur,sanırım yine de eline sağlık eskisi den iyi oldu.

  • @electronic7979
    @electronic7979 Před 2 lety +2

    Elinize sağlık

  • @mehmetaligultekin5525
    @mehmetaligultekin5525 Před 2 lety +1

    Nice work

  • @ercanaltun2098
    @ercanaltun2098 Před 2 lety

    Helâl be kardeş güvenim sonsuz zekana

  • @klevishoxhaj3862
    @klevishoxhaj3862 Před 2 lety

    Very good

  • @Muhammad1977ma
    @Muhammad1977ma Před 2 lety

    عمل جيد good 👍

  • @rosesantos4978
    @rosesantos4978 Před rokem

    This can't beat 997 motor this thing is just slightly bigger but it has the ability to beat this cuz it can handle 60v than this 24v motor

  • @hakanerdal7034
    @hakanerdal7034 Před 2 lety +1

    Sinan bey o motor orijinal sarım gibi görülüyor ancak balans var ilginç değil mi? kollektör sarımı sonrası karışımlı macunla balans ağırlığı da konmuş ama bir fayda etmemiş sanırım...ellerine sağlık...

  • @user-ti3ge4uv5t
    @user-ti3ge4uv5t Před 2 lety

    Класс

  • @efeileelektrikelektronik3310

    Bu tip motoru sökünce vidayı ger takmak çok zor

  • @AliTVTR
    @AliTVTR Před 2 lety

    usta kuba a4500 motosiklet motor sökme bakım geri takma fren bakımı gelirmi acaba

    • @AliTVTR
      @AliTVTR Před 2 lety

      @@SinanKeskinDC usta fren nasıl diye soracaksan kanpanalı sistem ford 3000mf 135 tür traktör frenleriyle aynı

  • @manangupta3285
    @manangupta3285 Před 2 lety

    This 24 volt motor is for electric bicycle.

  • @hamzanedimugurlu7103
    @hamzanedimugurlu7103 Před 2 lety +1

    Bu motoru nerden bulabilirim

  • @kurabiye67
    @kurabiye67 Před rokem

    Bu Şekil Bir Motor Satılıkmı Abi?🤨

  • @tiarmyidea4180
    @tiarmyidea4180 Před 2 lety

    Bagaimana caranya menaikkan rpm pada dinamo scuter yang low rpm

  • @pubgoyuncusu6873
    @pubgoyuncusu6873 Před 2 lety

    Sinan abi şu ne motoru acaba

  • @PabloPaiva
    @PabloPaiva Před rokem

    Hi buddy, I have a little problem here. I can't pass the screws to close it, they are attracted by the strong magnetic field and is impossible to reach the hole in the other side...

    • @PabloPaiva
      @PabloPaiva Před rokem

      ​@@SinanKeskinDC How I did it:
      Entering the screws diagonally, pressing against the external wall, and pushing all the way. Due to friction with the wall, the magnetic attraction can be resisted.
      Once you get to the bottom, in the openings on the other side you will see a little bit of the screw, clearly twisted in the diagonal direction in which it was inserted. There, very carefully, while continuing to fully push against the bottom, some of the force can be released away from the magnet, and it can be holed.
      It is either that or change the screws for bronze ones or some non-magnetic material, as the manufacturer should have done (or include some guides so that the screws do not move).
      Hope this helps if anyone has the same problem.

  • @ramusharma5421
    @ramusharma5421 Před 2 lety

    Bhai ye wala motor kitne rupaye ka milega plz comment kar ke batana

  • @user-ti3ge4uv5t
    @user-ti3ge4uv5t Před 2 lety

    Класс