FeiyuTech wg2x wg2 gimbal battery replacement DIY

This is a DIY instruction on how to replace the batteries on the FeiyuTech wg2x wg2 gimbal for action camera. You will see how to disassemble the gimbal and change the batteries.
This gimbal has 2 (two) 902830 batteries 3.7v 750mAh each. It was hard to find exact the same batteries, but what you need to know:
902830 - is the size of the battery 9mm - height, 28mm - width, 30mm - length
so the size of two(2) batteries will be ~ 18x28x30mm, you can replace with any other 3.7v batteries which will have in sum the same size or less, but not more (may be max 1-2mm more), the capacity can be any but you need to know the lower the capacity the less time the gimbal will work from one recharge, the more capacity - the longer work, original battery has 750mAh.
I found similar battery on aliexpress www.aliexpress.com/item/32964...
it's the same size but a bit more capacity, 900mAh instead of 750mAh, so i expect my gimbal will run longer on one recharge. You need 2 pieces of this batteries for this gimbal.
Save your money and Do It Yourself! Have a nice day, hope this video was helpful.

[@anto427]

hi my wg2x won't turn on. When charging green and red charging led are intermitting and mode led fjashes 3 times in red. May this be caused by a faulty battery?

[@Bicycle_tv]

can i use 18650 to connect and check why it doesn't turn on?

[@vadimbelavsky2687]

I think yes you can it has the same voltage