How to Install: Thinkware FA200 Premium HD Dash Camera
Vložit
- čas přidán 8. 06. 2024
- The Thinkware FA200 is the best introduction to the dash cam world! In this video, we will help you get this HD dash cam installed in no time at all! Just follow this step-by-step video for a fast and easy install!
🛒 Get the FA200 2-Channel Front & Rear Dash Cam Kit! bit.ly/2MEymHf
🛒 Get the FA200 2-Channel Dash Cam with Wi-Fi! bit.ly/2VFvhus
🕰 Powering Options Timestamps
Car Charging Accessory - 3:37
OBD-II Harness Kit - 4:13
Thinkware Hardwire Kit - 5:16
The accessory wire may not be available in new vehicles. Please call Technical Support for any wiring questions: 727-346-6281
With jam-packed features at an unbeatable price, the Thinkware FA200 is the perfect all-around, value-based dash cam.
⭐️ Everything You Need to Know ⭐️
Thinkware FA200 - Premium 2-Channel Dash Cam with Wi-Fi
Part Number:
Front & Rear Kit- FA200_NA1_2CH_16GB_H
Single Front Cam: FA200_NA1_16GB_C
✔️ Full HD resolution with 2.1MP CMOS sensor
High-quality image processor captures crystal clear video in 1080p, 30fps.
✔️ 2-Channels
Add an optional rear camera or interior camera for complete coverage.
✔️ Wide viewing angle
Provides a 140-degree viewing angle for the best coverage on the road.
✔️ Wide dynamic range
Video is always in the right exposure and contrast in any environment.
✔️ Optional GPS compatible
For an additional cost, add the Thinkware GPS antenna to unlock features like red light and speed light camera warnings and embedded speed, time, and location data in the recorded videos.
✔️ Integrated thermal protection
Super Capacitors and Thermal Sensor provides added safety and reliability in extreme temperatures.
✔️ Anti-file corruption
Proprietary technology improves reliability by protecting your memory card from data corruption and lost footage.
✔️ Built-in WiFi
Review recorded videos and update firmware using a WiFi connection to your smartphone and the Thinkware mobile app.
✔️ Parking surveillance mode (requires hardwire or OBD2 installation)
Monitors your vehicle when you're parked. Includes features like time lapse, energy saving mode, impact detection, and motion detection.
Who is CarTeck Now? We sell aftermarket automotive products to help you with your every day life. We're also the official distributor of Thinkware for the United States. 😊
Follow us around!
Shop: cartecknow.com
Instagram: / cartecknow
Facebook: / cartecknow
Blog: cartecknow.com/blogs/buying-g... - Auta a dopravní prostředky
Good stuff thanks
Thank you!
About to do this same installation on a 2017 corolla se with obdll plug.
Instead of hacking your way into the cars wiring loom... You can also just use an add-a-fuse and tap a constant or switched fuse.
There are different options for installing this camera, some people prefer a wired connection. But you could use an add-a-fuse as well.
Great video, as a non-tech, non-electrician whose tool box is a tape measure, a screwdriver, a hammer, and pliers, this is a great video. I've got everything done up to connecting to the car's power source. I want to use the fuse box so I can have the parking video work (my main reason for having the camera). Do you have any videos of that? I have the fuse taps as well. 2009 Elantra Touring. I don't know which is the pos/neg on the fuses etc.
Any ideas?
Hey John,
Give our Tech Support a call for assistance with wiring this into your vehicle. 727-346-6281 M-F 9am-5pm EST.
Hello! Excellent video! Does the rear camera also record in motion detection on Park Mode?
Yes, Felipe you will get parking events from both the front and rear facing cameras.
@@cartecknow1817 Thank you!
Installed on my car (Simi-Permitte installation) Behind Front rear view mirror and high on Back windscreen - Set-Up on smartphone for simple drive and go
Hi Jesse, you can contact our Tech Support at 727-592-5991 M-F, 9am-8pm and we can help you locate the wiring you need for your installation.
Nice work...Good Video Quality.
QUESTION: *I have a Volkswagen Passat...will this OBD port work?*
The unit works be sensing a voltage difference between the vehicle at rest and when the vehicle is running, so as long as it is not a hybrid or has some sort of OBDII gateway module between it, it should work for you on a Passat
Hi there I loved ur video. Can u pls guide me how can I install F200 thinkware in my new Rav-4 2021
You can give our Tech Support a call at 727-346-6281 and answer your installation questions.
I have a 2024 hyundai hybrid plug-in. I was reading that some OBD 2 cables are not compatible with hybrid/electric vehicles. Would this obd 2 cable work? Would running down the battery be a concern? Any suggestions?
Hi my son in law installed my thinkware f200 pro . But the front cam only working the rear is not working.what do you think went wrong about the installation?
Where do I get the obd adapter
Hi can you install in my hybrid car
Does this have a screen somewhere to see if its working?
Does your OBD2 adapter only work with the FA200? Or can it be used with other dash cams as well?
Hi Allen, the OBD2 adapter works with all Thinkware dash cams!
I just bought a 2020 Rav4 Hybrid. Will the OBD-2 adapter work in my vehicle? Should I hardwire? What is the best option? I do want the Parking Surveillance, since I live in an apartment complex.
Hey there! That question is best for our Tech Experts at CarTeck Now. You can get in touch with them here cartecknow.com/pages/tech-support
Good day. I have 2016 dodge ram sport. Where should I connect it? Thanks
Hi there, we recommend using our OBD2 power harness. It can be purchased here: cartecknow.com/products/obd-ii-power-cable-for-thinkware-dash-cam-installation
I have 2019 velar so please let me know the wire colour I need to connect the hardware kit
Sorry, we don't have vehicle specific wiring information for that vehicle.
I have a 1974 Corvette Stingray roadster (convertible). The small windscreen is pretty crowded with the front cam, the rear cam(spun around), the GPS receiver and the toll road pass. The F200 kit (dash cams, front and rear) only comes with hard wiring. Is there a preferred power connection point or as long as it has constant power?
The hardwire kit requires constant power, accessory power and a ground. You should be able to find those wires under the dash.
@@cartecknow1817 thanks mate. I wasn’t aware I needed the acc power too. Saved me a headache. Cheers🍻
This is a old video so i dont know if i will get a reply i cant call the number as im in Australia nor can i find anything to help but im having problems with the cloud. I have the gps and the f200 the shop installed my camera. I can connect to the link app but not the cloud app. It doesn't show my speed on the clips 😢
Hi I have a thinkware dash cam F200 with a obd Kit …..Do you guys install them or any recommendations where can I install near Brooklyn
We do not do installs but you can find one of our Dealers near you for the install. stingeroffroad.com/pages/dealer-locator
when do you guys restock those obd adapters?
They usually go pretty quick when we get them back in stock on CarTeck Now, but we also have them on Stinger Off Road. Link attached below.
stingeroffroad.com/products/obd-ii-power-cable-for-thinkware-dash-cams?_pos=1&_sid=098541424&_ss=r
Hello, I been having the Thinkware F200 but I want to have the parking mode. What do I need to buy ?
You will need either the hardwire kit cartecknow.com/collections/dash-cam-accessories/products/hardwire-kit or the OBD-II connector cartecknow.com/collections/dash-cam-accessories/products/obd-ii-power-cable-for-thinkware-dash-cam-installation
I need to wire this as my kit didn't come with a cigarette lighter plug and came with no instructions. Seems like this product is the EA of dash cams.
Pls demonstrate how to pair app to Bluetooth/WiFi for phone nd audio
Links to the Thinkware Cloud app can be found on the camera product page in the first link below. Instructions on setting up the app and using the mobile viewer in the app can be found starting on page 22 of the manual in the second link below.
us.thinkware.com/fa200/
us.thinkware.com/download/fa200-manual-en/#
@@cartecknow1817 Great video and thanks for responding
Is that the connector that is a Y with one male and two female ends?
The HWK-TW01 plug and play harness shown is a "T-harness" type connection that plugs inline with the vehicle's OBD2 connector to provide constant and ignition power to the camera. One end connects to the factory OBD2 port, one end connects to the IGN-3 module, and the last end mounts where the original OBD2 plug originally resided under the dash.
How do I install it in a 1965 chevy C10 truck with a windshield that is more at an incline and has a small rear window?
The lens is adjustable to account for different windshield angles.
@@cartecknow1817 it does not adjust enough, very poorly designed like it was made in china for poorly designed asian cars
Hi! So I connected the Kit I bought from you guys to the original OBD2 port of my mustang and the camera is still not being powered on. Did I need something else?
Hey Juan! We have a dedicated technical support team that can help you out with this! 🙂 You can chat with them here: cartecknow.com/pages/tech-support
@MrHungarianHammer no I called their support and it ended up being forwarded to a 3rd party company that no long deals with support for this camera. Support no longer exist really. I went ahead and went to a sound audio shop and had them hardwire the kit to my cars battery for like $120. Cost more but worth it since it’ll be on 24/7
So it won’t work in parking mode even if my cigarette lighter stays on when the car is shut off??
A question, if you left your car parked and unlocked then someone steal something. Is it recorded?
This kit has a front facing camera and a rear window camera, not a camera for the interior of the vehicle. So you may see the person walk up to the vehicle but you wouldn't have them on camera once in the vehicle. You could place the rear camera in a location to have a view of the interior if you decided that was a better option than the rear view.
What kind of cigarette plug do I need? Mine didn’t come with one
Depending on the model you purchased it may have only come with the hardwire kit. You can purchase the 12v adapter here cartecknow.com/collections/dash-cam-accessories/products/cla-power-cable-car-charger
Do you install the battery wire directly to the battery or find a 12v wire? Thanks!!!
You can use a wire inside the vehicle. You can give Tech Support a call at 727-592-5991 M-F 9am-8pm if you need any help locating wires.
Will hardwireing dash cam drain car battery ?
Your dash cam's power module will be able to monitor voltage level and will automatically shut off to prevent vehicle battery drain. You can enable the Battery Protection feature in the Settings menu.
@@cartecknow1817 so will it record at night while its parked and turned off with the parked wire adapters? that is what i am looking for. If it does do i have the option of how many hours i want it to record?
@@HernandezVictoria11 Hi. Did they reply to you? I’d like the answer to this question too.
I’m sure it’s common sense by now, but test the camera before you install it😄
Support for the dash board is rusting already
Oh no! That is very strange, and should not happen. If you please email our customer support team , we can get this issue taken care of as soon as possible. e-mail: support@cartecknow.com
Three things. 1 - The OBDD2 always has power on some cars (based on how it is wired) and eventually you batter would go dead. 2 - It would not be advisable to splice wires on a vehicle that is still under factory warranty as this would void it. 3- It would be better to hook it up to your fuse box.
Hi there.
Constant power is required for parking mode to function and isn't unique to the OBD2 cable. Both the included hardwire cable and our OBD2 cable provide constant power. Furthermore, Thinkware dashcams come with a battery saving function that will shut down the camera to prevent it from draining your battery. We've successfully tested our OBD2 cable in parking mode for up to 2 weeks.
Lastly, according to the Magnuson-Moss Warranty Act passed by the US Congress, splicing wire and tapping into your fuse have the same affect in that neither will void your factory warranty.
Thanks for watching!
no.. the fa200 has a built-in battery voltage cutoff. you can set at what you want it to shut down at. So you should probably delete your comment lol. The whole purpose is for it to always have power that way you can use it in parking mode for motion or impacts. dumbass.
No way man? lol Of course, that's why fusible links exist...
Amen bud lmao!!!@@ryandoe11
back to 12v fusible links...as I was screaming at your video as you side cuttered the supplied cabling f-links...WTH are you doing as a professed installer???
Turn off vpv, install dash cam link, push wifi button on camera, start dash cam link, enter password, should connect. Make sure internet connection to camera is on and connects automatically, also yoir wifi internet connection to NOT connect automaticall. If still does not work, unistall dash cam link and reinstall. Make sure wifi button is presse before you start application. I spent hours and days installing this lousy software on my Samsung S20 ultimate. Dont give up, it will work. If you dont buy your camera from an authorized dealer, whoever that is, thinkers will NOT stand behind there warranty. Good luck. Thinkware FA200 hardwired with rear camera.
This is to much just to install a camera. I'm not doing all that.
You can purchase the HWK-TW01 OBD-II cable to make your install plug and play and that will simplify the process. cartecknow.com/collections/dash-cam-accessories/products/obd-ii-power-cable-for-thinkware-dash-cam-installation
👍