35HP Oil Engine Start. 90 years old.
Vložit
- čas přidán 9. 02. 2021
- Krimo 35hp from 1930's. Made in Sweden by Kristdala Motorfabrik.
I have adjusted the rpm regulator on it, so i wanted to teststart it and see that it worked. And it works perfect.
It is a bit hard to spin those flywheels in this cold (-8 c) when oil and grease are thick.
And i hope that you can understund my English 😅 - Auta a dopravní prostředky
35 hp never looked so terrifying
I'm sure the torque is really high though.
@@JFBence well, yeah if you get your arms in any of the moving parts, they' re gone
I'm wondering what kind of torque it developed.
@@brianbumgardner8704 easily in the hundreds with that size, id guess around 350 foot pounds?
@@carlwheezerofsouls3273 chit probably more then that.
watching this will make you appreciate your electric starter motor on your car
Who needs a starter when you have a hill?
@@JRod0409 unfortunately no hills in florida, though my miata doesn't even need one as long if you've got the legs
That and it took 15 minutes just to warm up, before even attempting to start it.
Remember pony motors on old dozers? And that one pickup called slave lake?
You’re forgetting the other pistons..
I absolutely love this engine because the few mechanisms on it are so incredibly simple and incredibly genius at the same time.
yes unfortunately they were melted down we will need them again. run on any fuel
not melted down by accident, but to make us reliant
@@togowack probably for the war effort
@@aPoorsPerspective once the melting of old stuff was done and enough old cities were destroyed they ended the war... planned out and arranged to the last detail. People wonder why General Patton was so frustrated with his troops, many of his commanders had other orders.
@@thanks1418 what do you mean by -40
Love how he is able to change the direction that the motor runs.
Yes, thats cool 😊
Bạn có bán nó không.???
@@thinhphat4470 yeah of course he can send it by mail too 🤦♂️
Its called 0 rpm.
Maby not this one not sure. But motors like this you can get going bouncing back and forth without doing 1 revaluation.
This will become a CZcams classic one day in everyone's recommended.
I would like that!
It just did
I am sure
@@YesterdaysMachinery So here it comes, get ready
Its happening. From recos'
I love to see how far we've come from engines like this, true relic you have right there
Yea really impressive how far we have come. The new Toyota Yaris GR produce 261hp from a 3cylinder engine.
@@nils5395 Yeah but even if we have fuel, will it still run in 100 years time.
@@nils5395 this engine probably makes at least twice the amount of torque the Toyota can. Horsepower is a bad comparison for the two completely different engines.
This will be still around when the rest of the new shite we have built has dropped to bits ...
@@scavengerjoe1012 Considering that engines like these are no longer manufactured and that we now have engines which can procuce 10 times more power without being much larger. That’s why I considered it a relic.
I’m not one to change your opinion, but that’s just how I see it.
I'd heard of the method of reversing an engine by stopping and starting the fuel at whilst watching the flywheel in conjunction with Field Marshall tractors here in the UK, this is the first time I've ever actually seen it done. Very impressive!
Hi! Yes it is cool! Feels like you have a lot of power in your hand when operating the pump manually. / Richard
I’ve never seen this before. Amazing.
I thought that's what I was seeing but wasn't sure. That is just so simplisticly brilliant, makes perfect sense.
Very impressive reversal of rotation at 07:27. Pure machinery romance. Thank you!
Thanks. Yes, much power in such a small lever for the fuel pump.
These days twostroke snowmobiles use the same way to ingage reverse instead of a gearbox.
Same way the old Bolinder engines in canal boats would reverse.
90 years old and it's just getting 'broke in'. Your english is good, the accent adds to the charm of seeing such an old Swedish engine run.
It'll run in 100 years too, no problem for these old engines. Very sustainable. That's what I love about these old machines.
Yes, oil and grease then it runs forever.
to be fair it's not running under load, so I would hope it still runs in 100 years
I guess even idling few times a year is the best maintenance.
While in 100 years nobody would even remember a modern day Audi car engine
That's why in French, the term "chauffeur" was used. The man in charge of warming up the car's engine.
That steady "Whump, whump, whump" is like a mechanical lullaby - superb!
I like it how early combustion engines are so similar to steam engines that I can apply my knowledge of steam to this and it translates well
Yes i really like the early ones as well. I would like a stationary steam engine but they are hard to come by and the boilers are always scrap. /Richard
Great engine , but I really couldn't keep my eyes off the wooden truss brake 😉👍👍🇺🇸
Love it. Makes you appreciate the 7/8k rpms that modern engines have if you see how fast 300rpm is already
Imagine this at 7k rpm
@@slender1357 no thanks haha, theres a reason why pistons are much smaller nowadays :P
Really interesting to see such an engine working, it brought back fond memories of when I was a very young man. I was friends with an elderly farmer who had a vintage crawler tractor that had a single cylinder diesel engine, it was quite a big machine. Unfortunately the steering brakes were worn out so we couldn't drive it but we used it as a stationary engine to run a belt driven saw bench for cutting logs. That was fifty years ago now, and the tractor was from the 1920s, I cannot remember what make it was for certain but it might have been an international. The friend who owned it passed away circa 1980 so I cannot ask him.
The engine could be started with a cartridge, but because cartridges were scarce we usually started it manually , with a lighted fuse in the cartridge holder, it took two men with a starting handle to turn it over and get it up to sufficient speed that it would start when the decompression cam running in a groove like a screw thread on the outside of the flywheel dropped off and the compression came in. Like yours it would start with a whump, then gradually pick up speed. It didn't ever run backwards as far as I remember.
@adrianm.2043 - the reason this engine can run in either direction is because it's a two-stroke. When it's running slowly, you can clearly hear one 'WHUMP!' at each revolution.
Takes 50 HP to power the 35 HP engine😂 Great video!
Surprisingly accurate. Actually most internal combustion engines are even less efficient. You get at least 70HP to power a 30HP engine.
Even modern gas engines barely reach 40% conversion ratio. Most of them are 30~35%
Really appreciate the people with the skills to restore, maintain and keep these important pieces of history 'alive'. Great job!.
This looks so beautiful, and sounds so good. Those flywheels are huge on this thing, and starting the engine is some effort and skill!
It looks like a 2 man job to get that beast going. Thanks for showing off a nice piece of mechanical history.
The sound is stunning on this amazing machine. Thanks for not spoiling the video with a music overlay.
Was I the only person holding their breath when he was swinging on the flywheel??
Brillant engine and I like your skill to operate it,, well done
*GUILTY!* More tension than any drama on TV!
Truly an art. Thank you for keeping history alive !
I know they are not "clean" engines, but I do love to see and hear these beasts of the past. Thank you, Richard.
I knew at some point caution was going to take a back seat to getting this thing running.
Haha
"And i hope that you can understund my English" What? Your English is FAR better than most of CZcams man!
The engines not even running yet and I’m already impressed - by your mechanical sound effects!
You’ve got her dialed in nicely, I love how you reversed by throttling off then just at the right moment… great work.
Amazing piece of engineering history right here. Got yourself a new subscriber.
Your English is great
Watching this reminds me of guys starting Lanz Bulldog tractors.
I love the sound of this engine.
I am so glad i found this, i love these old girls ahead of its time. Thanks for time to post mate.All the best from Australia.
How on Earth did I end up binge-watching people start old engines? So much fun!
Thanks for a great video being an equipment mechanic and owning antique tractors, I love these old engines. I'm in Canada and there is quite a few Rumley oil pulls around, they sound sweet to especially under load, they set a big ploughing record here in Manitoba a few years ago with them. Quite often I've seen guys stand on the flywheel starting them to and thought you're only going to get a leg caught in that flywheel once, when it fires and a guy slips or don't move quick enough. Take care
Great video. That's a cool old machine!
I understood your English perfectly.
I love how you can run this engine in either direction just fine. Really wish I had a tractor with an engine like this at home.
Present generation is the most luckiest, blessed with all those modern technology. Now We have mechines that can be started with a button pressing. Thanks to those people who worked really hard for 2 or 3 centuries to give all these comforts to the present generation.
Your English is great and the video is interesting. Thank you for making this video.
in 90 years this will be a classic
Dude! It appears you can cancel the membership at your health club!! What a workout! Thanks for the video! When I was a kid in the 50's there in south Missouri the "old timers" would periodically put on a show with their old engines and they would typically have some sort of belt driven thrasher so we could see how it worked. Mostly the adults spent their time yelling as us kids for getting to close to the machinery. I remember it was a lot of work and there was a lot of noise. Thanks for your efforts to remind us of the shoulders we are standing on when we use our modern machines.
Fascinating. What a quality-made machine too, seems really well cast and built. Clearly great workmanship has gone into it.
The last time I saw one of these was in 1966 in a small town outside of Frankfort Germany. I was impressed then and also now to. Thank you
That torque generation looks scary high, how much?
All of it.
Around 583 ft/lbs
It has enough torque to take you back to the Future
@@skolsen78 So around 790,4 Nm in non retard units I guess. Quite sure it is ft*lbs.
@@AkaneTendo15111986 Hey don't get your panties in a twist because you don't live in freedom land.
Imagine how much work that these engines did during the industrial revolution.
You should check out the Kempton park steam engine. Things the size of tower block and still in working order.
@@seeriktus Seen it.
There was no industrial revolution, there was only the repopulation of cities with new factory workers. This engine is older than the hills, the Freemasons melted them all down to get us onto gasoline, anyone could run this fix it and run on any fuel and power anything. We have gone down wrong path.
The sound of the engine is so thrilling and yet it is also relaxing due to the rhythm of the chug chug chug. I could watch a video of various engines running for an hour or two and fall asleep to it easily. Awesome machine and awesome video!
I guess it’s relaxing, because it’s like our regular heartbeat.
When running in reverse, governor does not work. Spotted Ol Lumber
This is like a freight train. Very hard to get moving but once it's going pretty much unstoppable. GTA5 confirms my last claim
Your sound effects made the video something special. Thanks.
Exactly, I paused and hit thumbs up after a few sound effects, love it 😺
Working with your engines must be a wonderful way to warm up on a cold day!
You know you're starting the most masculine engine of all time when you have use your body mass as a flywheel weight.
Sure thing 💪💪💥
You: "Hey can i start that old engine you got?"
Him: "depends on how much you weigh! "
Who else suddenly wants one of these
Thanks for the upload, there is something about old machinery that leaves you in awe...also reminds me hand cranking some old tractors and how it was just waiting to get you lol
Great memories are always created by engines in some way.
This is such an awesome engine. I gotta give it to the guys who made this beast. I love it!
This is crazy. I thought it was an early steam engine at first. It took me a while of wondering why you were talking about 'fuel' to realise it was a massive one piston combustion engine.
The miracle and sophistication of modern combustion engines in cars obscures their incredible design and, ironically, it is these (relatively) crude early designs that enable us to wonder at how amazing they are.
I sometimes wonder why they weren't invented sooner and the initial assumption is genius designers. But I think as incredible as it is, the design innovation is not the most amazing aspect.
I think it is a combination of advances in metallurgy for the parts and chemistry for the fuel, along with a broad and deep supply chain with consistency of quality and reliability in all the industries that contribute.
It's really a cohesive social culture that was necessary for such inventions to come about.
What an amazing engine. Looks very powerful
i freaking love watching these things kick off such fun and the history
Puts life into a new perspective. Wish this stuff was still used and educated upon. Great job man. Providence bless you for having the will you keep it alive. 🇺🇸
I love the way you changed the direction of the engine.
I am impressed how it works in reverse mode in the same way as forwards.
Nice start up man! It's also neat that it can run in either direction. Thanks for sharing!
Obviously an old engine such as this could have benefited from some kind of timing advance. And, your English is outstanding. You and the Dutch always nail it.
Man that thing is going fast. That's the fastest one I have ever seen. Awesome
Boss: " It's the third time you've been late for work this week." Employee: "Do you realize how difficult it is to start an oil engine when it's 20 below?"
🇧🇷😂😯😆 will never leave its place
There were "hot bulb" engines like this that were often used on early powered fishing boats. The "bulb" is a small combustion chamber above the cylinder that is kept hot by the exhaust gas.
Thank for showing me the old engine. I am very appreciate you bro.
It’s faster than I thought it would be for the size of the engine. Nice!!
I remember some sort of large, open crank engine in the corner of the body shop I worked in back in the mid 70s. Never saw it running. Wish I had paid more attention to it back then. Very cool to see one of these come back to life. Very simple, very robust, very scary when running. I'm sure there were lots of injuries from folks getting body parts in the works.
@@trashcanmucous5153 No idea, I wasn't into the disco scene. I did have a few pairs of bell bottoms, though.
That’s a cold day to start a big engine by hand the oil would be real thick and it’s hard to turn them over I have the same problem with mine in the winter good video well done
Yep, much easier when it's above 0. But it can be done! Thanks!
Une antiquités agricole! À encore gardé tout son potentiel d'énergie. Belle restauration. Un abonné de France 😉👍
Imagine the huge torque this engine has ! Very impressive !
I love the fact that this can run in both directions so easily. Quite neat!
Krásný stroj,vzorný majitel,bravo!!!
Love this old machinery. Look how old it is! And still working! 👍🏻
They say its not the machine, it's the man behind the machine.... salute you Gentleman.
I liked when he hit the sweet spot and it ran nice and smooth, no hard chug .
It is very enjoyable to watch such old diesel engines work. Thank you very much for your work.
Not a diesel but a semi diesel.
These old engines have such a beautiful simplicity.
Yes, thats why they still works. /Richard
I love seeing this kind of older engine still running...very cool! (and, your English is excellent...)
Love how it reverses
It’s a beast of an engine.
This is the power of full mechanical system without electronics!
Your vocal sound effects when describing the parts are immaculate
Просто огонь! Вот это сила! А работает, как часы!!
На 315 об/мин выдаёт 35л.с. круть!
beautiful old engine!! its rated 35hp, so for it's size you know why steam fell out of use. I love these old survivors
Always on the hunt for machinery like this I can watch them run forever
Me to mate. /Richard
What a Great old Gal. They did so much work for us.
What a beast!! Best to have a friendly gorilla on hand to help with starting!
What a machine! Would love to see that monster under load!
I think its even more scary than she already is
That is one neat bit of kit.
Bet your pleased to have that in the shed. Absolutely awesome.
🤟☮️🇦🇺😎👍
Very nice, got myself back in my childhood. Thanks dear.
Absolutely beautiful engine. Love how you can reverse the direction.
I noticed when it first went off that it disrupted the flame on the torch heating the hot bulb. Also noticed a little bit of wisps of air or smoke coming out of the top of that once it was running. Might check to see if there's a crack in the head someplace allowing a bit of compression out.
The seal for the hot bulb is made of asbestos yarn. It always leak a little. And the steam comming from the water outlet is from old water standing in the cylinder and starts getting hot. The steam comes in pulses because the waterpump is a piston type and pumps air when the cooling tank is not conected. /Richard
@@YesterdaysMachinery
Thanks for the response... Much appreciated. Love to learn about these engines.
Have a wonderful day.
old water in engine at freezing temps eh?
@@ketas As long as there's considerable air space above the water, it won't break anything when it freezes. These engines were built to stand outside in all weather -- just had to remember some basic operations during shutdown, like draining the cooling jacket.
90 years old and runs like it’s new.
This is so amazing.. it's my first time to see this kind of engine. Yeah im from 90s kids, so i love this kind of good ol stuff.
I am a 75-year-old retired mechanic and I love this stuff
Lol, glow plugs have come a long way huh. :-)
Oh and there is absolutely nothing wrong with your English.
thats cool how you can reverse the engine
Elegant, raw power.
Anything that takes a beast :) to start it is itself a beast.
I'm lovin' this thing.
Thanks for sharing!
I could watch this stuff all day. 👍🏿
this is how my parents got to school everyday.. started their model Ts by hand for 15 minutes
Almost looks like it runs faster one way than the other way
Probably becasr its a 2 stroke and alltho they can run in both directions, they are tuned for only one so in that direction it has more power
Some older tractors with similar engines could run without making a full rotation, the crank just went back and forth. Depending on which stroke landed on was how you either made the tractor go forward or reverse. czcams.com/video/pYeEotP_c3M/video.html
Appreciate the description of the various components, like the lube and fuel mechanisms for example.
Great Engine!!!! Your English is fantastic. I am happy to see young people with an interest in these old machines. Once your interest is gone the machines will be gone forever.
The interest in these old engines has increased alot here now lately. Prices are sky high. / Richard