FT86SF Short Shifter Install
Vložit
- čas přidán 12. 01. 2018
- Our new FT86 SpeedFactory Short Shifter shortens throws by 28.5%, drops height by 3/8", uses high tolerance ball bearings for smooth shifts, and has a delrin reverse lock out to reduce rattle.
--------
FT86SF Short Shifter - www.ft86speedfactory.com/ft-86...
--------
Snapchat - Ft86speed
Twitter - / 86speedfactory
Instagram - / ft86speedfactory
Facebook - / ft86speedfactory
--------
Instrumental by Chuki
/ @chukibeatz - Auta a dopravní prostředky
Just put this one on today along with the mtec springs and I can't get this stupid grin off my face. I will admit there's a rattle (I think not putting the boot back on causes it) but its negligible to the amount of joy I feel from shifting from 2nd to 3rd and back again. It is a STOOPID improvement over the stock shifter!! I thought I loved my car before but now I don't ever want to stop driving it!
I really love the stock look, great video. I'm adding this to my list of parts... It keeps getting longer. 😝
Same bro 😂😂😂
@@straight2thepoint369 I don’t have an 86 yet but I’ve made 2 documents of parts already
I just installed this shifter with Mtec springs and I'm in love with it .. but with capital .. the shifter will not fit with the reverse lock plate which will make shifting to 1st gear and downshifting to 2nd gear will be difficult to place them especially if you are planning for tracking the car .. it really weird that it is not mentioned in the video or the website and if you watch the video to the end you will notice the reverse lock plate is not installed.
Those valenti tail lights tho! Those look sharp with the clear cover and white bar! nice video btw
So much want, my shifter has a little bit of play which bothers me and i like a taller peg style shifter so this dropping the shifter down is another plus. And with the taller shift knob im sure ill welcome the shorter throw. Look forward to another purchase from FT-86 SpeedFactory.
I just completed it by watching this video thank you
Great video made my day
You guys need to open a shop in the UK because it's hard to find some parts here :(
Nice haircut bro
Can I re-purpose the left over "super lube" for some non car-related activities?
only if those activities are super
I saved the lube and used jb weld instead
"Non car-related activities" eh? Bow chikka wow wowwwww
SkyeHack - yeah you can use it on you boyfriend or he can use it on you...which one you choose to do is fine with us cause it 2019
How does this shifter compare to the STI short throw shifter that Subaru began offering on the 2017/2018 BRZ models? Planning on ordering a BRZ this Spring, and that was one of the options I was planning on getting.
Not sure if your still interested, but I did a little review of the STI short shifter if your still considering it, maybe check it out. Thanks.
czcams.com/video/Lwc-51b3CRo/video.html
Can you sell window seals so you can do a video on how to replace and adjust them?
True
Does this shifter come with shorter bolts for the reverse lockout plate? If not, what are the specs for the factory bolts?
Does Raceseng’s reverse lockout fit in this short shifter ?
could you do a sequential gearbox on a gt86?
I bought this short shifter it’s amazing but I ran into a problem that the video didn’t do well with explaining. So in the video @ 5:17 mins when he gets to the 4 screws holding the lockout plate you have to place the lockout plate in the exact same place you had it before because if not you won’t have all of the gears in place. I had my lockout plate a little bit to the right and thought it was fine till I started driving and I only have 3,4,5,6 I didn’t have 1st or 2nd gear 😂 till I fixed it. Over than that it’s great.
No rubber boot?
How does it compare to the Kartboy shifter?
@ft86speedfactory do u have to replace the rear shifter bushings and the shift springs to install this?
You dont need to in order to install this, but those can be install along side the short shifter to make shifts even better.
Rear Shifter Bushing - www.ft86speedfactory.com/drivetrain-41/shifter-bushings-99.html
Mtec Shifter Springs - www.ft86speedfactory.com/mtec-shift-spring-kit.html
What if you have the push start version???
If you have push to start it’s the same exact process but youre just going to disconnect another connection behind the tray, it still comes out the same way though
engineering explained
nowwww!
How long did it take?
How different is the center console disassembly with push button start?
Scott Short not much different you just disconnect two additional wires but comes out the same way
What if I don’t transfer the little rubber ring to the new shifter? Any possible damage that can occur without it?
@ft86speedfactory
Does anyone else have a rattle in their reverse lockout/boot? It comes on after 4500 RPM. Anyone with a solution? My car is barely broken in.
I have a rattle somewhere in there so I’m here looking for a different shifter because I’m going to be taking everything off anyway. I seen that it’s that spacer/washer he removes after the pin that makes the rattle. Have you got your rattle fixed?
There are a couple of things which can cause it. One is actually the plastic cap on the stock gearknob.
Around that RPM is when rattles seem to appear. I found part of the reason is the sound pipe, it causes a slight vibration at higher RPM (try plugging it and some rattles vanish).
what about the dust boot?
What lubes do you use
Why not Line up the shots for the comparison?
Fish the rod? I been this step for the past 40 minutes. Am I doing something wrong?
Which Valenti taillights are the one on your demo black Toyota 86?
www.ft86speedfactory.com/valenti-helix-exclusive-sequential-clear-lens-cbw-edition-2013-ft86.html#.WlqwYqinGM8
Nash thanks!
Anyone have problems with this shifter rattling at higher rpms? Also can be tough to find second gear at times. Otherwise the shifter seems great so far.
Just got one today, installed and took it for a spin. In 2nd I get heavy rattling at above 4k rpm and in 3rd at above 4500 rpm. It sounds like the lockout is rattling on the lockout plate. So much for having fixed the kartboy rattling problems. And getting in 2nd can be a PITA, found it was odd installing as the lockout only barely clears the 10mm bolt making it hard to get a ratchet on.
Is yours stiff? When in neutral I get no free wobble, I'm having to apply heavy pressure to move from left to right between gears.
I have mine in the process of being returned, at this time there doesn't seem to be a fix. Going to try my luck with the Billet. Actually as for 2nd gear, I was able to get more clearance just by aligning the lockout at a different angle. Once I played around with that it was never an issue again. Mine was never stiff, everything else about the shifter besides the rattle was great.
Haven't driven in anger yet, but the stock knob rattles at all rpm. will need to glue it.
VERY. from neutral if I move it left or right it doesn't return to the center. I /hope/ it just needs to wear in. Yes big trouble getting to 2nd (or 1st) from 3rd. Will have to pull the console apart again and see about the lockout/screws.
I've never noticed my stock shifter rattling
Is that an OEM shift knob? The short black one
www.ftspeed.com/part/su003-00883-toyota-jdm-oem-black-mt-shift-knob-2013-ft86#.YOW5cuhKirw
Can you guys confirm if this short shifter will work with aftermarket driveshafts ?
Damn almost $300! I want that but it’s so expensive
the trd short shift kit will give you the same reduction for about half the price as far as I can tell
Is this better than the short shifter in my '18 BRZ pp equiped with the optional STI short shifter?
Not really it's only "shorter" by maybe a 3.5% lol
center exit exhaust? videos?!!!
at about 5:36 you don't show removing the boot (part 35016CA020)
@FT86SpeedFactory at'ing in the hope you see this
g4mb171 5:08
28.5% lol
I don’t get this channel tho they have wrx but never make videos about them
Chris Rodriguez oh thx
Go to subispeed
Wills86BRZ Yh I did thx tho
Firesfast 2131 because this channel is only for the ft86
Did somebody mention Subispeed?
3rd
Edit I’m 4th
So this is just a rebranded kartboy lol
first
No. Second.
I'll stick with my $79 top speed generic. It's lasted 2 years without issue. Why are all of these name brands so fkn steep?! Knock-offs > paying for names...sometimes.
That is the stupidest comment I have ever heard.
Am I the only one who didn't see the difference?
u r not alone