i am tying to explain as thorough as possible because that has not really been done before as deeply, so If you hae any questions regarding things in the video, feel free to ask here or, if you hae more complex questions about tuning, your project or need your car tuned, feel free to hit me up instagram.com/_throttlebuddies/ To show support for what i do + some benefits, check out my patreon: patreon.com/Throttlebuddies?L
Can i mount my trigger wheel with the first tooth before the missing tooth right at the TDC? So the config will be 0 on the trigger angle? I´m asking because i´m planning in stalling a 36-1 trigger wheel on my motorcycle (Suzuki GN250) rotor, i don´t know this angle, i will make it up, the sensor have its location, its a VR sensor. Or can i mount my trigger wheel with the first tooth before the missing tooth just line up with the T mark on the rotor? If you have any suggestion it will be deeply appreciated.
@@PowerPC602 sure doesnt matter the distance of the missing or first tooth to the sensor is the rleevant measurement for trigger angle i also show how thats calculated in Part 9. i suggest, you watch that. in part 10 wich will eb released soon i show how to set and confirm base timing
thanks, but well "speedy" isnt really the the right word since every video will be somewhere between 10 and 20 minutes haha. But i want to show everything and that takes some time. The whole process including showing how to tune a car will probably be around 20 Parts id assume. As for the basemap alone, it will probably be close to 10
Hi. If I don't have a cam sensor and the jumpers are set for only crank trimming, how should I set the secondary trigger edge? Can I disable that option?
Subbed. Great content and a great refresher for me. Been out of things for a while! So would a Speeduino be good for a 6g74 single jingle in your opinion? (turbo application) From what I can see on here I should be able to do a COP setup, even if wasted spark on the standard sensors.
Thanks! Should do it fine, if it has missing tooth and homing tooth on the cam you will be able to run sequential aswell. as long as it does not have direct injection or anything, you are gonna be fine
Nice work. I need some help/ guidance setting up a v4.3 board on an RB25DET engine, I'm stuck. I don't have any instagram or Facebook accounts but I do have email and WhatsApp.
i am tying to explain as thorough as possible because that has not really been done before as deeply, so If you hae any questions regarding things in the video, feel free to ask here or, if you hae more complex questions about tuning, your project or need your car tuned, feel free to hit me up instagram.com/_throttlebuddies/
To show support for what i do + some benefits, check out my patreon: patreon.com/Throttlebuddies?L
Can i mount my trigger wheel with the first tooth before the missing tooth right at the TDC? So the config will be 0 on the trigger angle? I´m asking because i´m planning in stalling a 36-1 trigger wheel on my motorcycle (Suzuki GN250) rotor, i don´t know this angle, i will make it up, the sensor have its location, its a VR sensor. Or can i mount my trigger wheel with the first tooth before the missing tooth just line up with the T mark on the rotor?
If you have any suggestion it will be deeply appreciated.
@@PowerPC602 sure doesnt matter the distance of the missing or first tooth to the sensor is the rleevant measurement for trigger angle i also show how thats calculated in Part 9. i suggest, you watch that.
in part 10 wich will eb released soon i show how to set and confirm base timing
You’re a great help and your videos are awesome.
Really nice speedy videos straight to the point, i like it!
thanks, but well "speedy" isnt really the the right word since every video will be somewhere between 10 and 20 minutes haha. But i want to show everything and that takes some time.
The whole process including showing how to tune a car will probably be around 20 Parts id assume.
As for the basemap alone, it will probably be close to 10
@@throttlebuddies6356 haha with Speedy i was referring to Speeduino ;)
I think you have just the right amount of length of videos, 10-30 is perfect
@@L1NKU5 yeah i think so too and if somebody needs a specific part, they can just watch the specific video that explains it haha :D
This is awesome.
Richtig geile Video Reihe danke !
Hatte den Kanal gerade wiederentdeckt, vor 3,4 Jahren schonmal was geschaut !
Which speeduino hardware you did use ?
Danke, freut mich, dass es dir gefällt!
In dem video nutze ich ein ua4c board bzw. von DIY-efi
Hi. If I don't have a cam sensor and the jumpers are set for only crank trimming, how should I set the secondary trigger edge? Can I disable that option?
in theory when you use wasted spark and batch injection then it should just work right away, just dont select something for secondary.
Subbed. Great content and a great refresher for me. Been out of things for a while! So would a Speeduino be good for a 6g74 single jingle in your opinion? (turbo application) From what I can see on here I should be able to do a COP setup, even if wasted spark on the standard sensors.
Thanks! Should do it fine, if it has missing tooth and homing tooth on the cam you will be able to run sequential aswell. as long as it does not have direct injection or anything, you are gonna be fine
Nice work. I need some help/ guidance setting up a v4.3 board on an RB25DET engine, I'm stuck. I don't have any instagram or Facebook accounts but I do have email and WhatsApp.
@@ricksonchattergoon2213 send me an email to the adress in the video description with your number
@@throttlebuddies6356 will do. Thanks.
Ever done a k20a3 before loke a rsx
no but not much different from any other engine. if you need help send me a DM on instagram!
Can I use the speeduino to drive coil on plug setup?
Sure, done it myself too