Video není dostupné.
Omlouváme se.
Custom Jeep JK SUV Rear Storage Drawer DIY
Vložit
- čas přidán 17. 01. 2020
- Walkthrough of my custom Jeep JK rear storage drawer. I made this drawer specific for my needs, as what I wanted was not available commercially. Apologies for the road noise.
You mentioned that with a soft top on, your box is protected because you lock the tailgate and no one can access your drawer; but then you add a piano hinge for top access. So much for protecting your items in the box! If i were you I’d install a cam lock on you upper access. 😎👍
C D Yes, I designed the box with a lock in mind for the lid.
this is the comment i was looking for.
I have been searching for ideas so far am going to still your my friend excellent draw
Thank you so much!
Best DIY drawer system I have seen! Great job man
Shawn Lindsey thank you so much!
I have the exact same cooler, going with this plan after seeing this haha! Thanks!
Awesome build btw
Javiii12321 thank you!
Very good job! I like it.
Thank You!
nicely done man! well done 👌🏻
JK Panda Thank You!
Love this.
Jenn Thank You!
Nice setup. What's the measurements of the frame and drawers to build?
How does the drawer face open without the shelf folding out while pulling? Very cool design/idea!
It has strong magnets on each side. I’m not sure if they were installed at the time of this video.
Nice drawer system. you seem to have made work around for a lot of the issues with mass produced storage systems. Have you kept the system or modify it since you made it
It’s stayed the same. I did permanently affix it using the existing tie down bolts and perforated metal strap. Extra safety in the event of a rollover.
Looking back, the drop down tailgate style table was unnecessary. I never use it, and it just added additional cost and weight.
hello i like to know how u build Thay base that on top of it drawer is connected , do u have a video ? for it
Any issues with the 5/8 deck?
None. It’s been through several seasons and doing just fine.
what were your base dimensions? I really want to build a raised platform like that, but having a hard time finding the dimensions of the back of the Jeep.
If you make the the lid a bit longer, the door lip would not let the piano hinge open
Javiii12321 that’s a good idea.
The little compartment, let’s be honest, it’s where you put your weed.
For reference. It’s quite old. czcams.com/video/CKOc6hXMDhc/video.html
@@thomascampbell7804 😂 thats hilarious!
So the whole platform is mounted to floor with just that center mount on the bottom?
No. The center support and adjustable foot is only to prevent bowing of the deck. The deck is secured to the existing threaded holes in the body at each corner. These holes were originally for the OEM cargo tie-downs.
Do you have the measurements for the bottom panel
It’s not a perfect square because of the rear door. But approximately 24.5”x36”. Lots of hand fitting to get it to work with all the curves…
How did you attach the unit into the cargo area?
Micah Johns I used the existing threaded holes in the back of the unit (originally factory tie down points) to bolt down some angle brackets. In the front I used angle brackets and sheet metal screws into the body itself.
What did you decide to paint it with?
Cheap interior gloss black.
Any chance you'd be willing to share the dimensions?
What are the dimensions of your box?
Andre Johnson the interior drawer dimensions are 22-3/4” x 20-1/2” and 10” deep. The whole box with rear subwoofer space is 27-1/2” x 31-1/8”.