How To Connect Audio Mixer to Headphone Amp / Splitter
Vložit
- čas přidán 6. 08. 2024
- There are 4 different ways to connect your audio mixer to your headphone amplifier and splitter. We only recommend three of the methods that we show you in this video.
PRICING FOR EQUIPMENT FEATURED IN THIS VIDEO:
► Mackie ProFX10v3: currentprice.io/profx10v3
► Mackie HM-4 Headphone Splitter: currentprice.io/4ch_splitter
► Balanced 1/4" Cable: currentprice.io/trs_cable
► Dual 1/4" TS to 1/4" TRS Cable: currentprice.io/14_2ts_trs
► Beyerdynamic DT990 Pro Headphones: currentprice.io/beyer_dt_990
► XLR Cable: currentprice.io/xlr_cable
► TRS Cable: currentprice.io/trs_cable
► Mic Stand: currentprice.io/desk_stand
► Rode PSA1+ Boom Arm: currentprice.io/psa1_plus
► Quality Acoustic Treatment Panels: currentprice.io/soundpanels
These are affiliate links, and I may earn a commission from Amazon (and others) on qualifying purchases.
BLOG POST WITH MORE INFORMATION:
► kettnercreative.com/audio-mix...
XLR CABLE BUYER's GUIDE: kettnercreative.com/buyers-gu...
PODCAST BUYER'S GUIDE: kettnercreative.com/buyers-gu...
LIVE STREAMING BUYER'S GUIDE: kettnercreative.com/buyers-gu...
MUSIC PRODUCTION BUYER's GUIDE: kettnercreative.com/buyers-gu...
CHAPTERS:
0:00 - Introduction
0:20 - Why Connect Headphone Amp
1:10 - Equipment We Use
1:35 - Pricing & Specs
2:00 - Balanced vs Unbalanced Cable
3:00 - Balanced Mono vs Unbalanced Stereo
3:48 - Headphone Output To Headphone Amp
6:40 - Aux Output To Headphone Amp
8:03 - Control Room / Monitor Output To Headphone Amp
10:08 - Stereo Output To Headphone Amp
10:58 - Summary
11:36 - Final Thoughts
STUDIO EQUIPMENT:
Editing Computer: currentprice.io/16_mpb_m1max
Camera: currentprice.io/sony_a7iii
Lens: currentprice.io/sigma_24_70
Headphones: currentprice.io/nth-100
Studio Monitors: currentprice.io/adam_t5v
Studio Subwoofer: currentprice.io/adam_t10s
Video Recorder: currentprice.io/ninja_v
Key Light: currentprice.io/keylight
Fill Light: currentprice.io/keylight_air
Uplight: currentprice.io/astera_ax5
Truss: currentprice.io/truss_black
SOFTWARE & TOOLS:
Final Cut Pro: geni.us/qW5K
MotionVFX Plugins: geni.us/5SFH6w
Affinity Photo: geni.us/86RLOhZ
Epidemic Sound: geni.us/eiPf1G
Envato Elements: geni.us/ENFErA
Tubebuddy: geni.us/Md6v
VidIQ: geni.us/dqUyD
Riverside FM Podcast Software: currentprice.io/riversidefm
GeniusLink: geni.us/vss0P
Website: kettnercreative.com
Instagram: / kettnercreative
Facebook: / kettnercreative
Threads: www.threads.net/@kettnercreative
Disclosure: If you purchase an item or service from an outbound link, we may receive a referral fee, which helps to support Kettner Creative.
All information is provided using our experience and research to the best of our ability. Links, videos, and other content are shared for information and discussion only.
Copyright: 2024 Kettner Creative Inc., All Rights Reserved.
#audiomixer #headphoneamp #headphonesplitter - Krátké a kreslené filmy
Read the full article here: kettnercreative.com/audio-mixer/how-to-connect-audio-mixer-to-headphone-amp-splitter/
What a blessing when you find somebody with such an indept and clear explanation, put in understandable and easy to follow words.
Thank you so much!
Perfect example of a how to video. I appreciate the direct follow through. This is incredibly helpful
Thanks for the concise yet informative video.
Thank you Kettner for this simple methods
So well explained, thank-you!
Info packed. Good stuff, fun listen
Very simple and super informative video - i got exactly that i need to know!
Thank you, very well explained.
Thank you so much. Very educative.
This is just so good and helpful brother. Blessings 🙏🙏🙏🙏
Thanks my guy!!! Im currently running the same set up I just needed more info on the different cords. Thanks again!
Glad I could help
Great video! I appreciate the information given! 👌💯
Very well done! Thanks!
Very informative Thank You!!
Thank you so much sir for your packaged information.
Great information. Thank you.
Awesome as always. Cheers Jordan
What a great video and explanation of how everything works in a simple to understand way. Kettner Creative always comes correct. PEACE !
Nicely explained thanks.
Thank you - well done!
What a great video. I learned a bunch. Very well done. Great presentation style :)
Glad you enjoyed it!
great video thanks for the understanding!
Great Video and very respectful. Thank you for not treating your viewers as idiots pretending to be a clown to catch our attention..Bravo!!! On another matter, I am looking for a different solution, but not able to find a video that explains how to go by to do so. I am trying to get my computer sound to go to the Google Translate App (to get simultaneous translation) and simultaneously allow me to connect a set of headphones while allowing me to speak back to the person on the other side. I am not, by a long shot, a technical person, so I hope I was clear enough for you to understand what my needs are. I hope you can respond and my apologies for taking the liberty to ask..Either way, Great job..
Really fantastic tutorial. Simple and straightforward.
Thanks for the video you just said what Exactly I was looking for and you explained very visual something I need to understand better. I just have a question, If I have a track to connect but I want the audience don’t hear the click only the band what I do to create that effect and how to connect thank you very much.
Awesome! Thank you!!!
Useful ❤️🙏🏾
your channel is just awesome
Thank you. Very helpful.
Glad it was helpful!
Thank you, this helped me out! Time to go sssshhhoping!!
This rules. Very helpful.
Holy sh**! Absolutely great explanation. Thank you!
Excellent presentation.
Thanks for watching
This video is a blessing. Recently purchased my first ever mixer Yamaha MG20XU and was wondering what would be the monitors solution for jamming with 4 / 5 persons and small concerts. I suppose this would be a straightforward and relatively inexpensive way to go .. right? Thank you.
Thank you!
You're welcome!
Nice video, mate!
Thanks a lot!
It was interesting! Thanks a lot. Is there any video with the profx 12? I am trying to use headphones for my in ears mix of a drumset with a few mics, but i want to be able to use the sliders to control the channel volumes. How should I connect that? Thanks!
thank youu so much dude, I have micro amp ha400 (behringer) and I don't know to connect it to my mixer (ashley premium-6). but because of your video, now I know how to connect it properly. I have a question, if I use main out method, which cable you to reccomend RCA cable to TRS cable or the one that you used? (TRS to doble TS cable )
Thank you for your video! I am a drummer playing a Roland eDrum TD-07 KV module with IEM stereo earphones KZ. Note I am only a drummer and our PA is a Yamaha MG 12 usb. No one in the band knows how to get my eDrums from my module to Mixer back to me. I have a Behheringer P1 splitter. Help me to connect! Kettnrr Audio videos are awesome! Thank you!
thanks for this video ! .. can i ask is it work with Goxlr mixer also ?
Can you do a tutorial for a drummer using a mini mixer with a headphone amplifier that could connect to the main PA system
Would love some advice! From my mixer, I am using a Bose tower as a speaker, so I have one main out and everything panned Left. I would love to use headphone monitors but will I be able to set it up so that I get sound in both ears?
thanks brother
Welcome
I'm not really new to music hardware however II am assembling my own setup for home / quiet band / online streaming
I plan on having an guitar + 3 amps + bass + keyboard + roland td17 edrum + 2 mic
my question are:
1. What do I need specifically to connect them all to one spot (make / model / brand / item links would be helpful)
2. We need to have the output be multiple IEMS/Headsets
Interesting video--however i am trying to take output of dbx286 pre-amp into similar Headphone 4- input and getting "scratchy noise"--not sure why
Hi
When using the aux output method is there certain adapters or any work around that u can do to make audio come through both sides of your headphones (mono through both sides)
Thanks !
I have the Mackie ProFX12v3 mixer and it has a monitor fix jack. There is also a control volume pot and slider on the board. Could I connect the 4 way splitter to the fx jack and then connect a wireless device for IEM’s?
Can i use the headphone output if i use an in ear monitoring system like the Xvive U4 or does that have to go to directly to an aux input channel? the version of this mixer we have is the ProFX12V3 with 1 aux output.....my drummer likes to use a wedge and I like In-ears. So wasn't sure the best way to give us both what we want
Can I use this method for live situation like in a small bar?
Good night, how do you create in ear setup for a 4 mic setup with a separate producers mic?
You can use this setup as an in ear band practice and recording right?
Great video! Quick question if we use the headphone outputs on a Mackie ProFX16 - will the faders control the volume we hear or will only the gain dial control what we hear?
Yes, the faders will control the volume you hear as well.
How would you set up talk back mic with this
How can I use 3.5mm headphone/microphone combo connector to 1/4'' plug on the mixer ? Thanks.
Plz help me for headphone with microphone like a Shure BRH441M with mixer and headphone ampl
Can use this as a splitter to separate my powered speakers, the top separate and the bass separate ?
Is there a mixer you can recommend that has a decent headphone amp to drive high-impedance headphones? Trying to limit the amount of gear if possible.
Can I use this on a x32 console?
I will want to use one of the Bus sends to feed the drummer on stage
great video. I would need an advice. I have a Mackie Profx16v3. Our drummer ( electronic) plugged in a stereo input line (9/10) would like to hear herself playing with a headphone but be able to mix what she is hearing (e.g more drum, les guitar), how could I plug the headphone for this ? in a monitor AUX ? or CONTROL ROOM L/R. Thanks a lot
Aux output into a headphone amp.
Hi, Does the HM4 accept signal from line out
Is there any way to connect wireless headsets to the mixer for hands-free conversation?
Hello Kettner, I have an importante question: How can I get the sound of the right main speaker into my right headphone and the sounds of the left main speaker into my left headphone....? I mean you said that with the phones output, I can hear the mix in stereo, but what does that mean? Am I going to hear the right speaker into my right headphone and the left speaker into my left headphone?
Hi , I have one question ? If i want to use Effect from mixer with my headphone ? Just Phones Out work with it ? Because I have an instrumental(Stereo) on one input and the microphone on another.. And if it's the FX SEND output that I have to use even though it's mono, how do I get stereo with the effects? Thanks for all your videos !
Ps: Another question , the HM-4 support Headphone 250 Ohm ? Thanks again !
And sorry if my english is not perfect , it's not my mother tongue.
I have the exact seem mixer and no matter the method of connection I’m getting a lot of hum any way to reduce it?
Hello! Please help me. I have a Yamaha Portable PA System with Bluetooth Stagepas 400BT. It has a console with only outputs for left and right monitors. Is it posible to use de monitor output to connect directly a in ear earphones using an adapter from 1/4 to 3.5mm? It also has a independent volume for the monitors.
So If I am trying to run 2 sets of headphone amplifiers for a middle school rock band to do headphone practice. I had one balanced cable going from the left master output to the headphone amplifier. If I have another headphone amplifier should I just use the right master output to the 2nd headphone amplifier? Today, when I tried using the headphone output it didn't seem to work - do I have to all the channels on PFS solo?
and what about master XLR output, If I don't have 1/4"...?
so if i want to split the output to 8 headphones
can i use 2 4-ch headphone amp, 1st connect to phone output, 2nd connect to control room ?
How can I plug my headset (with microphone attached) into the mixer ? Thanks
please, I want to ask. if i have a personal monitor mixer behringer p16 and i have an analog mixer but i do not have a direct out . So what should I do ? i ahve only 2 aux
Bro make video for how to record in android mobile with Mackie pro10v
Maybe I could sound stupid but instead of using headphones on Headphone Amplifier, can we also use that to record the sound to the Laptop or mobile, or also use it as the microphone for some live streaming applications like youtube or Facebook?
I have the audio mixer that has the Control Room output and I also wanted to use Stereo Out for the external speaker. But somehow the USB recording is not working because of a device malfunction.
If you can also make the video out of this it will be a huge help.
Kindly Reply. Thank you.
Great vid, any problem with the mackie mixer driving 250 ohms cans?
We made a video about it. But the short answer is that it does a great job.
@@kettnercreative just got done watching! haha, another good one! Just curious, is it possible to connect a headphone DAC/AMP solution (schitt stack is what im looking at) to the mackie mixer?
I need more help from you
I have a Mackie ProFx12v3+ connected to a Mackie HM-4 via insert cable to the control room jacks and I get no sound to the headphones. Can someone help please?
Hi! I have been watching your mixer tutorials for a year now and I just want to ask if you know what could be the problem if there's an hissing sound in my mixer's phone out?
I tried changing different in-ear wires but still the same.
Sometimes the headphone outputs just have a lot of noise. Typically this noise/his isn't captured in your recording.
@@kettnercreative But can I use this video setup for listening to my audio while live-streaming? Will that deduce the hiss sounds?
Anyways, thank you so much for replying! It means a lot!
Has anyone been able to find the specs for the Mackie HM-4? Noise Floor, impedance, mw per channel? It's a great price and if it is transparent and drives the headphones better than the cheap audio interface amps (they always underpower) then this is a great improvement without buying audiophile amp snake oil.
Hello my friend. I need a little help and you are an expert :(. I have Shure SM7B and use it with a mixer beringher 1002fx, but I get a lot of interference (-46db). What mixer do you recommend me for my Shure mic? I love you man ♥️
Can't go wrong with anything from Yamaha, Mackie, or Allen & Heath.
@@kettnercreative thank you so much my friend
Could you help me please? I use the behringer xr18 mixer and behringer ha400 headphones amp for splitting signal to 4 headphones on the rehearsals. I use “headphones” output on mixer. And while using some of the outputs of headphones amp I hear really noisy distorted sound. When I use this headphones amp for one headphones everything is ok. Could you help me please?
Bring the gain down on the monitor out on the iPad. If you bring the gain down the distortion will go away!
Make sure you bring the gain down only on the Selected Headphone amp monitors!
Can I use my aux in my mixer to connect to the headphone amp?
Yes you can, but it will only give you sound in your left ear.
Then ..how to achieve the.. output ",phone,". Has An Equalized ?
2 . If Im Using Aux Port..
What kind o Jack. . Should I use .to Headphone Amplifier Spliter
Is it Mono To stereo 6.5?
What happens if your headphone jack out of your mixing board is only playing on one side of your earphones
Couldn't you just use a mono to stereo cable to be able to effectively use the aux send
Exactly, I was about to ask the same question
¾ Hedwig from Split (James McAvoy)
¼ Lou from Nightcrawler (Jake Gyllenhaal)
tell me I'm lying 🤥 😳🤣