Climbing waterfalls 6x6 Mini Truck First Trail Ride
Vložit
- čas přidán 11. 05. 2023
- Use code GHP for 20% off your onX offroad membership: webmap.onxmaps.com/purchase/o... Taking the 6x6 Kei truck on the hardest trails in North Idaho. Is this mini truck up for the task? Let's go off-road and find out!
Tims channel @timmuniz_
Download our folder & ride the same trail as us: onxoffroad.app.link/1HITPUgiFzb
contact@grindhardplumbingco.com
PO BOX 2370
Sandpoint ID
83864 - Věda a technologie
Needs an exterior cage! But that thing is so sick!!! Loving the content lads
Agreed 👍would look sick too
and an extended bed!
And a snorkel!
Also a turbo 😏🙌🏾
Exocage & solid front axle would make it go harder
thing i learned today: "Cement is an excellent Soap"
I dare you to bath in cement 🤣😂 You want have to worry about your skin being clean the chemicals will eat it right off 😂 I played in cement barefoot once when I was a kid, that was a BIG AZZ MISTAKE 🤣
Takes the skin right off depending on speed and pressure
Well, fresh wet cement will literally turn all the oil and fat on your skin into soap. Not too far off i would say.
Must be a republican if you're that slow.
U mean semen?
Thanks for having me along guys!
You should build a rollcage in it, it would look so sick and probably improve safety as well
Weight would be a serious problem
Exo cage would be sick
He’s already rolled it & didn’t get hurt so why bother 🤷🏼♂️
@@scottspropertyservices6877 Exocage to save the body from serious damage
@@everettstormy yeah probably, but it would be a sick project and some nice free content for them
Welcome to the best six wheel driving channel on CZcams.
Sorry, the best five wheel driving channel on CZcams.
man you guys are my go-to channel, yall never fail to interest me in this type of stuff
The stuff that you guys build is amazing. Not only the unique builds but,the horsepower of the builds is absolutely ridiculous!
"Cement is an excellent soap"
-Ethan 2023
This is definitely my favorite build y'all have done so far😍
Love the bit at the end at Sydney mine!
That's been stomping grounds for my friends and I for many years.
Keep up the good work, you guys are awesome!!
This vehicle has Amazing weight distribution. Marvelous
This is the FUTURE. i Love it.
I'm from Spokane, lived in Sandpoint for a couple years when I was younger, I always think about you guys! Also that truck should definitely get a cage ♥
If you turn the circular saw blade backwards, it will cut plastic better.✌🏼
And use a finer tooth blade.
or a jigsaw
You can cut through tin and sheet metal that way as well. No sparks!
Amazing video guys.....premium footage !!!..... thanks for sharing this with us
Genuinely mega impressed with that plexiglass windscreen.
Enjoying Life, living vicariously through you all, keep it up fellas 😁
Great job on the video folks! Thanks for making it.
I dirtbike rigjt at those concrete buildings. I live in cda idaho, love Sandpoint. I worked up there for a few years. Love your videos and builds
I absolutely love videos like this keep up the blood sweat and tears guys!!
PPF would probably be a good option for plexiglass stuff. AFAIK, it's super prone to scratching as is.
It does scratch but you can always pull out the buffing wheel and make those go away.
@@levisilva3192 for the use case they have, it's gonna need to be buffed weekly lol you're not wrong, it's easy enough, but it might still save them some time in the long run and keep it a little easier to see for a while longer between buffing sessions
Looks like heaps of fun. Cool little rig
Before your next adventure, and after repairs, I'd recommend you install a rollbar, 2 spares, a small toolbox, and a couple of CV axles.
But, great video. And that Kai truck is super capable.
I drove a cab over Mitsubishi Fuso bucket truck for a cable company. I loved that thing they were so easy to maneuver and get in tight places.
I had an 87 Toyota 4x4 minivan. Not the most capable, but never driven a more fun road trip vehicle. All windshield butt over the front tires is the way to go
Anyone else see at 7:30 the bag in the back of truck defy laws of physics for a moment? 😂
My dream vehicle is the Jeep Mighty FC... COE or FC vehicles are generally regarded as unsafe during head on collisions. But you're absolutely right that they are the pinnacle of performance while off road.
MAN;s ingenuity knows no bounds. amazing job you done there... how many ARB LOCKERS ARE US USING.
Now we need metal bumpers, skid plates, nd over cab rollcage, like on that black Tacoma
The ends will come off your spoil of 550 cord. Take two 4” thumb-size sticks with mild groove in their middles. Tie some of the cord to each groove, leaving two strands through the center axis of the spool. Twist the sticks in opposing directions, tightening them against the outsides of the spool. Friction will hold them in place, securing the ends of the spool for rough handling. Do it.
A thin disc grinder, or circular saw with only the teeth going beyond the guide, both work well for cutting plastic. I usually use the grinding wheel for any curved piece and saw with aluminium cutting blade only for straight cuts. If you tape the back edge you get a better finish.
At 7:33 the bag in the back slides backwards as you go up an obstacle. At first glance it looks like the bag glitches out and stops moving
Your play way too many video games if ur first glance at a bag sliding in a bed is that it’s a glitch
I had to rewind twice, once to check and another for the satisfaction.
Mental issues..
windshields are structural components in most cars and help support the roof in the event of rollovers. Usually add roll cages before they add "lightweight" windshields
hell yea, love the wind shield
Wow! It's unstoppable. So cool.
thats the coolest thing offroad trail i've ever seen
It's funny this came into my feed, I was just watching 8x8 European big rig offroad trials.
this kei truck is awesome now, it just does everything easy.
Watching it wade through the first stream, I'm like damn, a snorkel would've been class.
A sweet exo cage tht ya still b able to load pwerwheels n the back b perfect weekend trail beast
Just cuz concrete is my gig. Cement is an ingredient in making concrete.
Love the channel. ✌️
You guys content is unmatched
I loved the Surron in the back
Another premium banger gentlemen!
When cutting plexiglass turn the blade around on the saw! We do it that way all the time and it’s way easier and smoother!
Anybody else feel like they had to pull a piece of glass out of their hand when he did that!?!?
Viene ay tremendo video como siempre saludos desde Uruguay ✌️😉 y todo el aguante como siempre 💪
Man I''ve been dreaming of an offroad cabover for so long. The mini size and it being 6x6 is just fucking rad. Nice build sir.
This lil truck is your coolest build :)
Super capable 6x6.
Epic as usual with u lot love the burnout in the back on the surron 🤣
You guys really have built a powerful small 6x6. Hope the tight hand front wheel drive can be repaired. Send you love from the Netherlands
Technically they didnt build 6x6, just did body swap, but that on its self is pretty hard on its own. Too bad cost of 6x6 has went higher due videos like this, so no god damn chance getting one for price i could build anything like this.
The maintenance at my place has the 4 wheel versions of these. I've seen them effortlessly climb steep snow covered hills and blast through 2 feet of snow.
ohhh man this ones gonna be sick !!
This is so cool I want one of those so I can do all that off-road stuff
Denver Creek used to be challenging, but so many people have run it that it's turned into Disappointment Creek! Now that you've Way Pointed it on OnX, I'm sure it will become the next route of I-90!
Just found my new favorite CZcamsr
I watched some good content today but I know this video is going to make me happy
Exo-cage would be kool 👌 Excellent Job on that one Ethan 👏 👍 ☮️
Another *PREMIUM* Grind Hard Plumbing Co upload.
So freaking cool!
Love from 🇮🇳India brother❤
This really shows how unnecessary those huge brodozers are for off-roading, or on-roading, or anything really
This thing is so much more capable than 99% of all pick-ups
This next to the hoonigan mini truck at seam would 🔥🔥🔥
That's super funny. I used to run around that trail and hangout at that old mine when I lived around that area!
I was trying to figure out what all those structures were. My guess was a mine, thanks for confirming. I'm guessing it was abandoned in the 70's or possibly the 80's it so, not that it matters.
This video looked awesome, that little 6*6 is turning out to be more impressive in each video it is featured in.
Building quality level 👌🏻
SOOOO AWESOME
Tip for cutting plexi with a circular saw, flip a metal blade backwards. Cuts it like buttah
Reminds me of a mini Stewart & Stevenson military cargo truck. Would be awesome to see this thing painted in desert tan 686 or olive drab green. Throw a snorkel on it, make some detachable D shaped bars for the bed and get a canvas cargo cover for it.
That thing is so cool. I want one great job.
You guys are my favourite ❤
That thing is so cool 😎
That is easily the coolest thing you guys built. Needs a tool box on it somewhere.
I've always thought right below the back window was a perfect spot to put a box. No visibility lost out the back, and if it was full bed width you would have all the room you'd need, and still room for a cooler, a jackery power bank and a couple spares even lol
and maybe even a small hydraulic picker!
It's got a great Haflinger vibe! With a bit more power though 😂
*Been talking to everyone i know about this build. This thing deserves to be manufactured and sold as an emergency/rescue vehicle in hazardous environments around the world* 👏😤
Super cool 🤙 pretty bad when will is offering you gloves to be safer. Like I said before I almost think you should build kits to make these.
9:10 all those push-ups are paying off 💪
I think the most impressive thing about this is that it just looks *right.* Like it was always meant to be like that.
Классная машина получилась! Классное видео! Круто Круто!!!
7:30 awesome optical illusion haha
This looks like pinehurst, I live really close to that. There is thousands of trails up here specially near Wallace. I’ve been to that exact mine so many times
I run Denver creek, red cloud, and Sydney mine all the time! Just a few miles from my house
I love the plexiglass windshield. A few years ago my girlfriend rolled her Camry. I put in a plexi one, till we could find a affordable replacement.
She still drives the car……
I recommend you put a laminate on the outside of the windscreen like 3m stoneguard to reduce the risk of scratches. Perspex is not so good at resisting scratches.
I would love to see you beef up the suspension and make it airride.
Should've wrapped it! Neon pink!
I believe you guys are close to Blackhills. Some of the best trails in the US there. That is a true test of the lovable k 6x6! 🙂
Wow nice truck # ilike this video 🔥🔥🔥
Alright its settled I live way north an hour from Canada due north and guys I just need one of these ,forget a side by side keep the jeep
This rig absolutely makes those boulders and downed trees and logs look seemless.
Bravo dudes favorite project yet honestly
You know it's just a shortened 6x6 polaris ranger? Like I assume the standard vehicle is only a bit less capable due to being a bit longer.
Not that it isn't cool or anything.
@@johnjosephson9277 the simplicity is what makes it so cool in my opinion
OnX is an awesome app. I use it for hard enduro riding.
Gi grind hard I seen someone say to build a roll cage and you should but on the outside of it to keep the truck cab from getting tweaked more
You guys so need to do a selectable rear steer on this
Should make a complete rollbar for the outside of the Cab . And a Awesome front Bullbar bumper.
Couldnt you get an extra portal axle and make a 6x6 with the mog chassis?
You guys are so awesome 💥🤪
If you flip the blade on the circular saw it will do 100% better with Plexiglas or Polycarbonate.. use Polycarbonate when you can .. it is much better optically, stronger against impact.. and far safer in a rollover or accident.
Thanks for this build.. I have a 2004 Polaris RANGER 6x6..
I think you should build and exterior roll cage for it would look sick and be a lot safer when it rolls 👌
TShirt ( Cement is an Excellent Sope! )
Next upgrade is tipper bed, wheel arch, roll cage in the cab, a snorkeler , performance exhaust system, led lights bar and last but not least is a proper paint job with Grind Hard decal
Looks like a lot of fun but you should install a roll cage