NAVIFORCE NF9095 How to set the time and other functional mode?

This video aims to introduce the operational steps of different functional modes of Naviforce watch.
We got the NF9095 with four functional modes, ranging from Time Display Mode, Chronograph Mode, Alarm Mode to Time Setting Mode.
Firstly, I am supposed to present you the key components involved during this adjustment process.
The button on the top left side of the watch is named button A.
In counterclockwise order, the second button is button B, the third one is button C and the fourth one is button D.
The figure or Second in the lower right corner is a simple criteria for judging what function is operated.
Locate the button B and press it to change your watch into the mode you want.
When a flashing number, Second, in the lower right corner, it turns out that the watch is in the Time Setting Mode.
Press B to switch into Time Display Mode, in which the changing number, Second, in the lower right corner will not blink.
Press B to come to next mode, Chronograph Mode, in which Second will not blink or change if you don’t start timing.
And then press B one more time to select the Alarm Mode with the signal of “H” or “A” or “P” in the lower right corner but not Second.
Next, I will show you how to set the time, such as 17:10 of November 28.
First of all, press button B to select the Time Setting Mode.
“Second” will blink.
You can press D to adjust “Second” to be zero.
And then press C to select the other items in turn.
Press button D to adjust the flashing item, like adjusting the value of Minute to be 10.
The hour setting is done. Press C to switch into “Hour” and adjust it to be 17.
Switch into week. It is on the left area.
When setting “Hour”, the display of “H” on the right area indicates 24-hour Time Format; “A” or “P” indicates 12-hour Time Format.
Finally, press button B to confirm and return to Time Display Mode.
In timer mode, press C to display the alarm time; Press D key to display the month & date.
Press B button to select the Alarm Mode.
Press button C and button D simultaneously to activate the alarm with the signal in the display.
Press them one more time to deactivate the alarm function.
Press button C and button D simultaneously to activate the hourly chime function.
When pressing button C and all of signals of week are completely displayed, it turns out that the hourly chime function has been activated.
If you press C and no signal of week is displayed, it turns out that the hourly chime function has been deactivated.
If you would like to set the Alarm, such as 7:20.
Press C and “Hour” will blink. press D to adjust the the hour to be 7. Press C to switch into Minute, adjust it to be 20.
Finally, press button B to return to Time Display Mode.
And you can press C to display the alarm time at this time.
When reaching the preset time, the watch will alarm for 60 seconds and then automatically stops. Press one of the C buttons to stop the alarm.
When watch is alarming, press D to activate alarm snooze function. The watch will alarm for 60 seconds again after the normal state of five minutes. Press C to stop alarming.
Press B button to select the Chronograph Mode.
Press button D to start timing and press button D again to stop timing. When stopping timing, press C to reset the mode.
If you want to get the finish time of two competitors, you need to press button D to start timing.
And press C to activate split timing measurement when the first competitor breasts the tape, indicating his finish time.
When the second competitor breasts the tape, please press D.
And press C again to deactivate the split time measurement, indicating the finish time of the second competitor.
Press C to reset the mode in the end.
Get one here: es.aliexpress....
More:
Official website : www.naviforce.com
Twitter: / naviforcewatch

[@patelavej62]

Very clear information and practical tutorial 👌 🙂

[@srinivaskella5723]

Thank you 😊 really helpful 🙏♥️

[@silvafish2443]

lindo relógio! o meu chegou hoje

[@SoonZhang]

thank you

[@mdkazishahjahan5808]

How to turn off flashing under weekday

[@deepsharma76]

How to convert format 9f 24 hr in 12 hr plzz tell

[@npcnasir7632]

Thanks mam💖💖

[@shchychowdhury2272]

How I on or stop alarm

[@sapnasinghbasnet5751]

how to brighten lite

[@deepdhilln7497]

Pllz tell me how to turn off the alarm on this watch..pllz am frustating

[@brilitsajan5590]

Ya me too 🥴

[@sabitulsabit5393]

Press C and D

[@SatishYadav-ti2ur]

How to stop/disable alarm perminantly.

[@mohammedelhassanhabiballa5700]

C & D simultaneously

[@sherifqassim9322]

How to make it make sound every hour?

[@mazinelgizouli8149]

How to see date day and month?

[@pintudas2332]

Can I convert 24 hour mode into 12 hour mode?

[@wladimirfroes3220]

First click lower left button 3 times to get into the time setting. Then click lower right 2 times, so the hour will blink. Now just keep clicking the upper right. There's a small text in the display that says A, P, PM or H. If you want 24hour format, it needs to say H. As you keep clicking the upper right button this will change betweeb A P H. Hope this was understandable :)

[@kesus3207]

@@wladimirfroes3220 Thank you so much, i've been fucking with that for over a few hours and couldn't find how to change that anywhere

[@PokSaDids]

What's Battery no. of this model NF9095

[@mahmodelsabah99]

how to edit in weekly days

[@ravirajbl1]

Analog is not working

[@RanjeetSingh-vb2jx]

Hlo price

[@RanjeetSingh-vb2jx]

Oline book line