I'll be rewatching this in a couple months when I get my Brembo BBK kit out of the box. Nick was speaking quickly in this one, where he's usually not in the podcasts.
@@konigwheels You two are doing a great job every week. We all aren't movie stars. Well... Maybe Ryan Reynolds, The Rock, and Will Smith are. But I don't count them as "car people".
This was very informative. I purchased a big brake kit and now I can't use it until I get new wheels. I was just hoping they would work out but no way. 40 offset w/ 10mm of spacing still not enough. New Wheels here I come.💯🤙🤙🤙
Listen to you guys real often, I love the channel I have a 2012 Nissan maxima I am looking to get a big brakes upgrade Akebono looking to get some new wheels to fit looking to get the 20 x 10 x 15 mm offset would that work ?
Hi. is it possible to give help and advice when it comes to installing a large akebono 6tloc brake kit with 375mm discs on an audi a6 c7? which rims should i buy, as i don't have them yet, so that this brake kit fits into the wheel / wheel arch / suspension space? thank you and continue with the videos.
Thanks Miguel. We are happy to try and help you. You would either need to get some actual measurements (we can send you a sheet to show you which ones) of the installed brake kit. Or you would have to have the brake caliper template from the supplier you're purchasing it from. But after that, yes we can help!
i wish i had seen this earlier, ive purchased some 19 inch wheels for my FN2 civic type R they are 8.5j with a 40 offset i thought plenty of clearance being standard wheels are 55 offset ive found using a template big brakes dont fit as new wheels spokes are straight so expensive mistake
It is kind of a yes and no answer. You can absolutely move them to another location if you can add weight in a suitable spot to still balance the wheel and tire assembly. However this may result in the inability to dynamic balance the wheel and it may be more of a static balance. It will have a lot to do with the actual wheel design.
I know this for a fact that a 2008-2015 Scion xB can be well installed with a wheel spacers for 17x9.5. And I’d seen it before. So with 17x9.5, how big can I go for wheel spacers without getting the caliper gettin Contact by the spokes? @KonigWheelUSA Also I’m already rockin my 16x7.6 Konig tandem wheels on my 2”15 Scion xB2.5, and man they look beautiful and much better look and stance out nicely. 🙌🏼🙌🏼 Those dark gloss graphite looks very elegant.
First of all, thanks so much for your support! Unfortunately, your question is hard to answer. It depends on the wheel design, offset, tire size, and etc. Most of the issues we actually talk about in this video that explain why it's hard to answer. If you want to contact us with specific info we might be able to try and help. Thanks again!
Sending you guys the PDFs to check the fitments is AWESOME!
👍🏽
One minute, one minute! Run through that again for me boys, let me go grab my notebook, this some important info I got to understand!
Great tips for people to figure out which wheels to fit their BBK. My Hypergrams look slick paired with the StopTech C43 kit.
💙
Short and sweet... Thanks again guys!
Kenneth Lopez thanks so much for watching!
I'll be rewatching this in a couple months when I get my Brembo BBK kit out of the box. Nick was speaking quickly in this one, where he's usually not in the podcasts.
We’re working on it! We’re not movie stars, were wheel people. Haha. But we’re trying to get better!
@@konigwheels You two are doing a great job every week. We all aren't movie stars. Well... Maybe Ryan Reynolds, The Rock, and Will Smith are. But I don't count them as "car people".
This was very informative. I purchased a big brake kit and now I can't use it until I get new wheels. I was just hoping they would work out but no way. 40 offset w/ 10mm of spacing still not enough. New Wheels here I come.💯🤙🤙🤙
Super appreciate you watching and leaving this comment!!
Been emailing Scott recently about brake clearance and I feel personally attacked by this vid. Just kidding, great informative video
HAHAHA! It's all love! Thanks so much for your support, means a lot!
Good valuable information.
its easy to determine if a bbk will fit your existing wheels but not easy to determine if a wheel will fit your existing bbk...
Listen to you guys real often, I love the channel I have a 2012 Nissan maxima I am looking to get a big brakes upgrade Akebono looking to get some new wheels to fit looking to get the 20 x 10 x 15 mm offset would that work ?
What's the DL;DR to look for? How do I find the size of my caliper and how that translates to what specs I'd need for my new wheels?
Is the inner barrel diameter always the same for same diameter wheels?
Generally yes, they can be. However they can vary depending on wheel design, so keep that in mind.
Damn, wish I'd watched this a week ago. Just got caught out by some concave wheels not fitting over my bigger Brembo calipers.
UGH...so sorry my dude!
Same here smh
Hi. is it possible to give help and advice when it comes to installing a large akebono 6tloc brake kit with 375mm discs on an audi a6 c7? which rims should i buy, as i don't have them yet, so that this brake kit fits into the wheel / wheel arch / suspension space? thank you and continue with the videos.
Thanks Miguel. We are happy to try and help you. You would either need to get some actual measurements (we can send you a sheet to show you which ones) of the installed brake kit. Or you would have to have the brake caliper template from the supplier you're purchasing it from. But after that, yes we can help!
i wish i had seen this earlier, ive purchased some 19 inch wheels for my FN2 civic type R they are 8.5j with a 40 offset i thought plenty of clearance being standard wheels are 55 offset ive found using a template big brakes dont fit as new wheels spokes are straight so expensive mistake
Sorry to hear this, Alex!
Will the Konig Ampliform 19x8.5 +30 offset clear big front caliper for 2018 Lexus is300? Thanks in advance
which of your wheels will fit a stock c55 amg in 18s?
Can you relocate those wheel weights to fit a rim if they’re just barely interfering with the caliper??
It is kind of a yes and no answer. You can absolutely move them to another location if you can add weight in a suitable spot to still balance the wheel and tire assembly. However this may result in the inability to dynamic balance the wheel and it may be more of a static balance. It will have a lot to do with the actual wheel design.
I'm going t get some lockout rims
which is the x factor of dekagram 9,5x18 et25? do you think they touch the brake of a European nissan 350z with stock brembo brake kit? thank you
What height do you need the X factor at? However the 350z Brembo does clear the Dekagram 18x9.5 et25!
18 inch wheel 9.5 25 offset on a 2014 bmw 425i with Brembo big brake kit will it work???
I’m the video we tel you how you can send us that information so we can check for you!
i wonder what wheels would be best for my m240i 2018.
.... cant manage to find any good rims that will fit my wheel bace perfactly.
Hello! What size and offset are you looking for, front and back?
@@konigwheels i'v been told 8.5x19 ET43 and 9.5x19 ET50 is the perfect fitment for my car to have it sit flush. but i'm from europe
Will 19x8 +49 and 19x9 +37 SSR VIENNA COURAGE clear 1997 LS400 stock calipers?
Give SSR a shout and ask them. Sorry!
@@konigwheels ok, no problem, thanks
19x9.5 wheel with a 15 plus offset with clear brembo brakes???
We would need more information. For example the car, actual brake kit and what wheel model
Hey guys is their any way l could call you guys to ask a few questions
Of course. Our contact info is on our website!
I know this for a fact that a 2008-2015 Scion xB can be well installed with a wheel spacers for 17x9.5. And I’d seen it before. So with 17x9.5, how big can I go for wheel spacers without getting the caliper gettin Contact by the spokes? @KonigWheelUSA
Also I’m already rockin my 16x7.6 Konig tandem wheels on my 2”15 Scion xB2.5, and man they look beautiful and much better look and stance out nicely. 🙌🏼🙌🏼
Those dark gloss graphite looks very elegant.
First of all, thanks so much for your support! Unfortunately, your question is hard to answer. It depends on the wheel design, offset, tire size, and etc. Most of the issues we actually talk about in this video that explain why it's hard to answer. If you want to contact us with specific info we might be able to try and help. Thanks again!
3:35 if you have a 35mm wheel and you put a 10mm spacer now you have a what? 25mm wheel? You mean 45mm wheel dont cha?
No. If you have a et35 wheel and add a 10mm spacer the wheel is now sitting at an et of 25
Bro that's not how the x, y, and z axes work! 😆