Check out AutoVerdi www.autoverdi.... My instagram: / peterbjorck My second youtube channel (Swedish): / busbil My Facebook page for my cars: / bjorcksbusbil My company: www.bjprace.com
Very impressive. The LS oil pan you showed actually looks a lot like the Dailey Engineering/VAC motorsports oil pan I had for my S85 V10. The design and quality makes me wonder if it's AutoVerdi that manufactures it for them.
No, Dailey makes it in house in USA, Auto Verdi system is lets say inspiration from Dailey :D. But this system were seen on some rally kitcars in 2000´s..
Another great video. The products are so high spec, so well made, such great engineering and quality the all way thru. I love when you make these tour videos
Yes people... Pay close attention @6:55... more directly @7:00... The timed wood drift key slots... that is critical.... pending how many pumps are in line, of that type of lobed pump system... if not, you will have surging and or pulses of under pressure and worst of all, over pressure.... I had another brand of pump that was for a machine collection system, that would vibrate, and rip itself to shreds in very short time, and this machine was every bit the cost of $200K USD.. and we couldn't figure out what was going on each time it failed... until the service call for a new inline pump came up to be replaced the replacement unit a year later.. and all the vibrations went away, the destructive pulsing was gone... .. If each pf the pumps is its own system, or is a low RPM's, then not a big deal, but if either of the intake or output side share feeds channels, Make sure these lobes are timed... Kinda like how they showed at this time stamp @7:00... good luck
Rob Dahm needs to get one of those pumps if he doesn't already. Supposedly he had a dry sump oil pump failure at his first half mile event with the 4 rotor. I hope the ecu shut it down before any damage was done!
Too bad there is no way to contact you directly. You are doing an amazing job, video wise but also with the informative engineering. I honestly love your video’s, the way you talk about engineering and get happy when you see good engineering makes my day! Keep up the good work, amazing video’s, really interesting and very educative!😁😁
A Lambo V10 engine highly customized revving @ 9000 rpm in a Volvo. If I had that; I probably could not drive it. I would be rolling on the floor laughing my ass off after 5 minutes.
Why do you keep saying it when it clearly isn't true? There are many cars just as well-built as Volvos and many that are better-built. Your having one in your garage sure doesn't make them the best cars ever made! He's getting parts for his *Lamborghini engine* , didn't you notice that *nothing whatsoever* in this video had anything to do with the quality of Volvos?
If you were serious you'd have asked them, or one of their retailers, directly, they're not hiding and they're sure not going to be looking for customers in TY comments.
The strive he has for quality in his builds are so fukking insane. Any build by Peter is a work of art no doubt about it.
I wish we had these videos when the supra was being built
Nice video... good to see that the Swedish industries are alive and well!!!
‘Very nice’ for Peter to take us on the Auto Verdi shop tour 👍
All those beautiful parts, what an amazing manufacturer. Thank you for the tour.
Jesus that sump is a thing of beauty!
Sånahär videos gör en lite patriotisk. Snyggt jobbat Auto-verdi 🇸🇪❤️💪🏻
👍👍👍
🇸🇪👍🏻
Auto Verdi has a good reputation! Great that you are show casing Swedish manufacturers. And love the accent too lol, "Partsh"
Sweden makes all the best pumps.
Insert random Austin Powers Swedish-made-penis-enlarger-pump-joke her...
That oilpan for Revline Racing's billet K24-engine looks great!
Thanks for the tour, I learnt a lot! Lovely looking engineering.
Auto verdi is on a whole northern level. I need some 606 rods in my life.
Such a cool Company and Stefan and Steen are great guys 👌🏼
Impressive quality and workmanship in those pumps! Thanks for this tour Peter!
Very impressive. The LS oil pan you showed actually looks a lot like the Dailey Engineering/VAC motorsports oil pan I had for my S85 V10. The design and quality makes me wonder if it's AutoVerdi that manufactures it for them.
No, Dailey makes it in house in USA, Auto Verdi system is lets say inspiration from Dailey :D. But this system were seen on some rally kitcars in 2000´s..
Insane craftsmanship its purely beauty and pride in this
I seriously enjoyed this video, very much appreciated. Superb quality, now I know where RCM get there kit from 👍👍👍
There is so much cool stuff for motorsport thats made in sweden, its ridiculous.
Another great video. The products are so high spec, so well made, such great engineering and quality the all way thru.
I love when you make these tour videos
Most important part of a true racecar
Yes people... Pay close attention @6:55... more directly @7:00... The timed wood drift key slots... that is critical.... pending how many pumps are in line, of that type of lobed pump system... if not, you will have surging and or pulses of under pressure and worst of all, over pressure....
I had another brand of pump that was for a machine collection system, that would vibrate, and rip itself to shreds in very short time, and this machine was every bit the cost of $200K USD.. and we couldn't figure out what was going on each time it failed... until the service call for a new inline pump came up to be replaced the replacement unit a year later.. and all the vibrations went away, the destructive pulsing was gone... .. If each pf the pumps is its own system, or is a low RPM's, then not a big deal, but if either of the intake or output side share feeds channels, Make sure these lobes are timed... Kinda like how they showed at this time stamp @7:00... good luck
I wish you had access to the technology and parts available now for the supra and documented it like this. Dream series.
Almost same methods/techno in every car.
Austin Powers already knew that the best pumps are swedish made
Rob Dahm needs to get one of those pumps if he doesn't already. Supposedly he had a dry sump oil pump failure at his first half mile event with the 4 rotor. I hope the ecu shut it down before any damage was done!
You also find AutoVerdi connectingrods in Ken Duttweiler built landspeed recordholding Chevrolet engine.
Exited to see end result of Volvoghini :)
Another intresting video! Thanks for bringing us with you on this tour 😀👍
Nice pump. I just purchased a used 6 stage. It definitely is pretty nice.
Wery cool to see these parts and shops in detail. Thank you👍
Too bad there is no way to contact you directly. You are doing an amazing job, video wise but also with the informative engineering. I honestly love your video’s, the way you talk about engineering and get happy when you see good engineering makes my day! Keep up the good work, amazing video’s, really interesting and very educative!😁😁
Peter you are class
Just beautiful
Cant wait to see it when its rdy 👌
Very nice motorsport parts manufacturing in Sweden. The women are also pretty too.... maybe I should move to Sweden
Man you’re like the Swedish Rob Dahm
Only The best is good enough for The old Volvo!
That pump is probably so expensive, it would probably pay of my mortgage.
Maybe in Uganda
You could probably buy a Volvo for that money
Sweden has been known for pumps of a disparate variety of applications since the 60s. ;-)
I wonder if the US racers give credit to the Swedish engineers? Good ol usa lol
Excellent really enjoyed the information there
Nice video amigo 😀👍
Tack Peter 👍🏻
A Lambo V10 engine highly customized revving @ 9000 rpm in a Volvo. If I had that; I probably could not drive it. I would be rolling on the floor laughing my ass off after 5 minutes.
Where gonna miss you when you are traveling back to your own Planet
snyggt
har en pump från verdi på in som ar funkat klockrent sen dag 1
I'm thinking of getting a dry sump system for my turbo volvo redblock.
Nice!
I have said this before, but Volvo's are the best car ever made. I have one sitting in my garage right now.
Why do you keep saying it when it clearly isn't true? There are many cars just as well-built as Volvos and many that are better-built. Your having one in your garage sure doesn't make them the best cars ever made! He's getting parts for his *Lamborghini engine* , didn't you notice that *nothing whatsoever* in this video had anything to do with the quality of Volvos?
Fun fact: "Auto Verdi" literally translates to "Auto Value"
Visst fina pumpar, men hade grabbarna en bild på Gunde Svan upphängd någonstans i verkstaden?
It is very hard to buy used dry sump pump.
Hejhej hembyn!
Great. Mechanics Porn..
RCM = Roger Clark Msport
Why does that press sound like chewbaca?
Cool shop tour. But i left wondering that will there be enough oil for that sweet K24 when that VTEC kicks in yo?
this is the pump @rob dahm needs
Oily meow. xD
Isn't Lambo engine already dry sump?
This one appears to be. At the end where he was pointing out areas to connect the lines, I'm pretty sure those are suction passages.
Need that company to build me a oil pump in he future if I don’t have a CNC machine and my own schematics by then
How much do you think they would want for some 2jz rods?
about 190 euros plus VAT
If you were serious you'd have asked them, or one of their retailers, directly, they're not hiding and they're sure not going to be looking for customers in TY comments.
@@nickturner2813 it's about 190 euros plus vat but it depends. what is the model of the connecting rod
När åker du tillbaks till Dubai?
Vet ej!
Allen bolts.
3:29 200 MM of teflon?? MIcrometers maybe?
He says two hundreds of a mm.
I think he said a 200th mm
@@kastapostgard5306 tried to listen twice was not clear. For sure NOT 200 mm....
0.02mm