4 HOBO Stove Upgrades
Vložit
- čas přidán 9. 03. 2023
- In this video I show four upgrades/enhancements that can be made to a basic 31oz tin can HOBO stove.
HOBO Stove Stanley Cook Pot Kit Build:
• HOBO Stove Build & Wor...
HOBO Stove Upgrades:
• 4 HOBO Stove Upgrades
Basic and Upgraded HOBO Stove Burn Test:
• 2 HOBO Stoves Burn Test
Burn test using a Trnagia and 1oz round tin burner:
• HOBO Stove using a Tra...
1oz Round Tin Alcohol Burner Build:
• Build a Small Round Ti...
Waypoint Survival HOBO Stove Stanley Cook Pot Kit Build:
• Stanley Two Cup Cookse... - Jak na to + styl
You really put a lot of thought into this setup. I'm impressed!
These are a neat concept. I have often considered making something similar but move the feed hole to the upper half, cut more vent holes and a couple of holes for ash to fall out.
During my burn test I did have wood pellets fall out of the stove, moving the feed hole up is a better idea, I'll give that a try.
@@planetsideagent glad I could help!
Smart man! I need the list of making this hobo system. I will orderthe same things online and make it myself.
Excellent ideas
👍👍👍 ..
Nice concept with multi- variations on a theme.
I have something similar .. have just used an IKEA Stainless Steel Utensil Holder as the Stove. The stainless steel gives me longivity. SS Bolts act as legs to raise the bottom which allow for air flow from the bottom and an 'air gap' to protect sensitive surfaces. A tin can cut to size and 'hole' (drilled) accordingly, as and when required, placed inside the stove acts as an adjustable wind screen.
A nice share .. thanks. Always some ideas over which one can 'mull' 😁.
I have seen videos on the IKEA stove but have never tried it, in fact I've never set foot in an IKEA. 😀
@@planetsideagent IKEA 'flat-pack' furniture is the status quo in Europe 😁.
A hobo stove system.
Should make the leg a lil longer by at least half an inch so you could bend each leg clockwise or counterclockwise for more stability. Like a schwa sticker .
Good Idea, I'll have to give it a try.