Making a Coil Pot - LIKE YOU'VE NEVER SEEN!
Vložit
- čas přidán 3. 06. 2024
- Well...sometimes Ann gets these whacky ideas. Not sure where from but this one is a "doozy". She attempts to break a world record for the longest hand extruded coil and make a very unique coil pot. You wont believe what happens! You will also see the creation of the newest, hottest pottery tool...THE COIL MASTER 2000! You just can't get this anywhere else folks (and probably for good reason). Anyway...enjoy the revolution of pottery!
Answers to questions we get all the time:
We typically bisque to Cone 04 and fire to Cone 5-6
Here is a link to Ann's White Liner Glaze: imgur.com/a/w8PP8Gy
Where does Ann get those shirts: little-street-pottery.mysprea...
If you would like to BECOME A MEMBER of the the LSP Research Facility team and earn a cool title that you can put on your resume, we invite you to hit the "SUPER THANKS" button or the "Buy Ann a Coffee" button to help us unite the world through pottery. Thank you!
Check out Ann's Etsy site with the link on the video.
Ann also creates sought after custom mugs that she paints exclusively for individual clients. If you would like to learn how Ann paints with underglazes - check out her Video Workshop Series here. These workshops are very detailed (typically 1.5 - 2 hours in length) where Ann provides step by step instruction and are designed to help potters take their work to new levels of craftsmanship and artistry. vimeo.com/showcase/6725318
Here are links to some of the tools we use:
Styrofoam Mold: amzn.to/39KoL0U
Painters Trim Guard: amzn.to/39C5TAX
Hole Punchers: amzn.to/3JutWyu
Brushes Ann Uses: amzn.to/3I4E8NI
Wiggle Wire: www.sheffield-pottery.com/She...
Xiem Tools X-Bevel Bevel Cutter for Pottery and Ceramics:
amzn.to/3rZnmKi
Diamoncore Tools: diamondcoretools.com/
ProPlus Sponge: amzn.to/3x8Ye50
Best Red Ribs: amzn.to/3sU7qbF
The Cameras we use: amzn.to/3JJfGCd
Best Cheap Lens we film with: amzn.to/3I6Eljy
Best Good Lens we film with: amzn.to/3s1NuUW
#pottery
#handbuiltpottery
#throwingpottery
All Music used in our videos is LEGALLY LICENSED through Artlist. - Jak na to + styl
This is exactly why I can never throw anything away. Just in case I need to make a “coil master 2000“. Great creativity!
Hahaha, you made me laugh remmary! That is why I have practically a whole craft store in my garage, haha.
Hi Ann... did you use the entire 8ft? This is so great
@@franakoudelka2615 Hi Frana. Yes. We used the entire 8 feet. It was enough for approximately a 5 inch mug or perhaps a little bigger.
Oh...Reminds me of noodles making! With repeat tossing and hitting the dough against the table, it eventually splits and produce multiply noodle threads-like coils! Will try out on clay dough. lol.
Lol. Love the creativity. Jim should file a patent for the “coil master”.
I would have curved all that clay back around the table so I could pinch it back into another coil and make a plate to go with that cup. A nice little curled cookie plate. Flatten the bottom but leave the top ridged. Glaze it well with food safe glaze and this will be a cute little ‘after school dessert combination’. Congrats on the record.
😂 You made my day. DCT should have an extruder contest
This is very well done and enjoy the creativity along with the music...not to mention the incredible skill Anne demonstrates to producing the cup!!
STEVE!! Great to hear from. you. I am glad you enjoyed it. Jim and I definitely teamed up to figure out how to solve the challenge just to make the cup and then of course Jim got very creative with his editing and music. which really makes it entertaining. Thanks for watching!!
Very creative idea!! Brilliant!! Perhaps I could use one of those wooden paper kitchen towel holders (so the wall mount is the base) and cardboard roll as a coil master.....
Oh my gosh, yes!! Great idea Cariad!!! perfect!! Give it a go. Thanks for watching!!
Oh Ann... I love your sense of humor. Just got to blowing up the scale and you've already improved my day...
Haha!!! Of course that was a Jim idea. He had a lot of fun editing this one. 🙂. Thanks for watching Em!
@@annruel1982 Gotcha! I just love both your dynamics and how it always looks like you're having fun with the videos. It's a pleasure to watch. Thank YOU!
@@embee7434 You are so sweet, Em!!
Indeed, Revolutionary!! 🤓👍
I love extruders! Although I know the good ones can be a bit pricey. The local hobby store often sells smaller hand-held ones, or you can DIY it with a caulk gun. For something spectacular, try braiding thinner coils. Maybe even try adding some color into individual strands. Thanks for your hard work and beautiful results!
those are such great ideas Katana!! Love those. I am going to have to try making one of those do it yourself caulk gun extruders. that would definitely be a challenge.
You are a very patient person! Fun idea!
Haha!! Hi Pat! It was fun putting our heads together to solve the problem. We had fun doing it.
@@annruel1982 I loved the end result and thought y’all’s Coil Master 2000 was high tech 14th century perfection! Great job!
Great and funny idea 👏🏼👏🏼👏🏼😁😍
@@pattrull9387 hahahaha, too funny Pat!! I guess as high tech as a toilet paper dispenser can get 🙂. Have a wonderful day!
@@potteringaroundtheworld823 Aww..thanks so much for watching!!!
You have the patience of Job, and the imagination of DaVinci! So cool and clever.
I loved this as I do everything I’ve seen you do. The “Coli Master 2000” was a stroke of genius. The only thing I might have done differently would be, since I already had that long coil with a trough in it, I might have added a different color clay in the trough and see what could be done with that as well.🐝❤️🤗
Hi Deborah. thank Jim for the genius idea!! I like your idea of adding the colored clay. that would be so cool!!! I like how you are thinking.
@@annruel1982 You’re welcome, I hope you can use it sometime. Thank you Jim!🐝🤗❤️
Cool idea!
@@embee7434 Thank you!🐝🤗❤️
Excellent video! I loved the humor and the detailed instructions. Now I need to try this…
Wonderful!! It was a lot of fun to experiment with. Go for it!! Im sure you will be able to think of a different more elegant way of doing it!!
So clever!!! Lots of fun to watch your shenanigans!
Hi Jill!! thank you so much!!! This was a fun challenge!! Have a great day!
Love your fun and interesting inventive ideas ! Always a pleasure to sit and relax with a smile 😊 thank you Anne . Jim’s new invention is very inspiring!
Hi Lou. Thanks so much for the kind words. and we appreciate you watching. Im glad you enjoyed it. We had fun solving this challenge. 🙂
Well… I am speechless !
What a genius idea!
Congratulations Ann!
Glad you like it!
Jim’s special effects and the “Coil Master 2000” as well as your master coil skills made for a very entertaining video this week! What a fun experiment! The tongue on the DiamondCore tool can be adjusted down just by loosening the screws on the side. You probably knew that already, but just in case you didn’t. Now…..for my genius idea on another way to make this project…..a home made pasta making machine! Fortunately the Arcobaleno AEX18 model will hold 15-20lbs at a time and will only run you about $6259! 😮You might need to purchase a custom attachment to make “noodles” (aka coils) that are thick enough to withstand rotating around the Coil Master 2000 without breaking. 😂 Keeping my fingers crossed 🤞🏼 that the best idea submitted might just win themselves their very own autographed Coil Master 2000!!! 🎉🎉🎉 You guys are the best!
Thanks! Perhaps Elon Musk is watching and will send a "Buy Me A Coffee" for $6259 and we can purchase that AEX 18. Love the idea!! Thanks!
@@LittleStreetPottery ha ha ha! Right?! Or Jeff Bezos - 😂 A clay extruder would be much less expensive and more practical I suppose. 🤣
Love your music selection on this one
Hi Hayley. That of course was a Jim thing. I thought it was. a perfect choice too. It really fits with our experiment.
Brilliant!
Thanks so much Jan!! I appreciate you watching!
Great experiment! And Coil Master! A nice idea would be to take the top end of the coil and instead of trimming it down flat, just bend it down to creat the handle from the same piece of coil.
Yeah, great idea...may have to try that as one continuous piece! Thanks.
Cool idea! Jim is a genius. 😄
I think I would have cut each coil instead of spiraling them, and have even layers, like bangle bracelets. Either way, it's a fun project! Thanks for sharing!
Hi Pat. I can see that in my head. That would have solved the problem of the non-flat foot and rim for sure. The only thing for me would be the connection points at each coil. My porcelain doesnt like them and tries to warp. I was wondering if this project would warp in the firing, but to my surprise it was round when we took it out of the kiln...... I say go for it Pat!!
How fun!! And I absolutely love the end result. Would have never thought of doing this.
Hi Michele! It was fun brainstorming about how to solve this challenge for sure. The Diamondcore hand extruder and the Coil Master were the keys to making this idea work for sure.
@@annruel1982 I see that very much so!! It was a great bunch of ideas!!
@@micheledickey4066 Thanks Michelle! We really appreciate you watching.
@@annruel1982 You are so kind! I enjoy learning from you!!
@@micheledickey4066 Yeah! Thanks Michele!
That is great 👍 !
Thanks for watching Ninel and for the kind words.
Another terrific video! Instructional and humorous! ❤️✨✨✨✨
Love it! Your narration was great! The pot turned out great!!
Yeah! Thanks so much Chris. We appreciate you. watching
Makes me want to go to Dairy Queen 😄
Hahahaha!!!! Now that you mention it, I can see that especially at the segment where Jim pans the coil up and down. I wondered why that made me hungry, haha.
Brilliant and fun
Thank so much Lin!! Im glad you enjoyed it
Muy ingenioso
This is so cool!
Hi Kat!! Aww...thanks so much! I am glad you enjoyed it!!
You are a hoot and my hero :0) How long did it take you to make this, and how did you keep the clay from drying out? This was great.
The whole process was about 3/4 hour to build it and I did have to apply water periodically and compressing the clay to keep it from drying out. Once the coil was extruded it stayed pretty wet.
O G... but also, ooooh geeeeee........😉
where can I buy a coilmaster 2000?
Soon to be available...we're negotiating now with Ron Popeil and Ronco. :)
Thanks
Aww....thank so so much Lou!! You are awesome!
Be on the lookout as we will feature you at the end of one of our videos and Jim will bestow upon you an official Little Street Pottery team title 🙂
Oh blimey !!! Now that would be a privilege I’d be proud of from across the pond !!!! 🏴 🇬🇧
@@louisegibbon5472 Love it Lou!!! Hello from Florida 🙂. How exciting
let your clay get to leather hard then cut the ends flat
Hi Bob. You are right, cutting would have been a lot easier at leather hard. Good thinking.
Der Aufwand ist viel zu gross, um dieses Ergebnis zu erzielen
Hi Christine. Perhaps, but it was a challenge that we set for ourselves purely for fun and as we didnt have a wall mounted extruder, the solution was the best we could come up with. Besides it really is a cool mug in the end 🙂. thanks for watching anyway and it is nice to talk to you.
Don't get me wrong I really liked the Project but it really wasn't a coil just because it was cut in half it was only half a coil