ATTEMPTING TO BLOW SUBWOOFER AMPLIFIER!
Vložit
- čas přidán 5. 08. 2017
- Hope you guys have enjoyed this video! Be sure to subscribe to my channel for more content and be sure to let me know in the comments what you want to see!
Purchase merch: goo.gl/80i8ul
Add me on Snapchat: Doublsmm
Add me on Instagram: Doublsmm
Spotify Music Playlist: goo.gl/gnMWtq
Camera: goo.gl/kE6hRc
Lens: goo.gl/1raF8U
Microphone (on camera): goo.gl/kR8oyQ
Microphone (portable): goo.gl/6CrvPj
Gorillapod: goo.gl/9pzpGG
Thanks for watching hope you enjoyed! - Auta a dopravní prostředky
The amp shut down becauze that integrated circuit has built in protection for overheating and when junction are over 100°C protection shut off the current flow... after he cool down amp boot up again.. Sorry for bad english! :)
THey're Transistors, and they don't have built in protection. There's usually a thermal relay in there that will open circuit when it's too hot. If you can force it closed then it'll stay on. But that's possibly destructive. :p
Thanks for the explanation, and don't worry your English is fine
Not really fine, but good enough.
+Krists Jāvalds fine = good enough lol
As far as i can see it using some TDA base thing as audio amplifier so that has built in over temperature protection.. you say something about some relays but i dont see any relay on that amplifire board....
Keep up the great vids!Could you link your decaf mix please?
What camera do you use? Its so good!
cool amp maybe it has a temperature protect or something?
What for amps are You using for the daytons?
What for daytons Subwoofer are that?
Can you blow your speakers outside and not inside?
I think if you were trying to kill the thing running below rated impedance you should have used a test tone at least 3x higher than 18hz. Every car audio setup I've ever jury rigged under rated ohms has no problems whatsoever at ultra deep freqs, but will immediately trip protection/ heavily dim the lights / stall the car ( lol ) at higher bass notes. Which is intuitive as the more times per second you demand the amp drive the speaker to an arbitrary excursion, the more power will be required, as a linear function. ( all else being equal, not counting box resonant freq of the enclosure or crossover roll off ) so don't be afraid to burp some low-mid bass to stress a setup. The only exception off hand is when playing freq below a ported enclosures port freq, unless I'm mistaken.
what's the music that you used to blow the amp the second time?
Why is the decaf mix gone?
Awesome vid bro👌
Why do you use a Logitech Wave keyboard instead of something like a Logitech K400?
you should check and see how many watts that plate amplifier is putting out by testing it before the clip light turns on if it's 100 watts or less not worth it but i thought about if you used a behnegar amplifier they have some cheap ones and they make a ton of power just make sure it ain't peak power has to be rms power only
The amp has thermal protection, it also unlikely you will be able to damage the amp as it has SOA protection built into the chips, it will current limit and/or shutdown on overload.
is it 230v or 110v were your from because the switch on the back of the sub is on 230v DC that might be the reason for the current traveling though unless your countrys voltage is 230v then i have no idea aha
Can you link your decaf list?
YES A NEW VIDEO!!!
The amp sound kinda awesome if u don't abuse it leave 8 ohms that port is the same style svs use
I’ve always wanted to see someone running white van amplifiers to the MAX. And someone finally did it! Very nice
Can anyone recommend any Amps for a Pioneer TS-W311D4? (400 Watt Long-Term) Btw i dont want to spend more than 200$ on the Amp ._.
Where is the decaf mix?
I thought clipping only affects tweeters & woofers
❤ I love your videos because I been watching your videos and your video are amazing 🤩 😊
Doublemm, Can you tell me about your fronts? I like the look. Are they Daytons?
You should use the cv-900 to blow speakers (and the white van amp)
The CV-900 had died.
It has a fuse ya know, to prevent shorts in the circuit...
Does clipping an amplifier well below the subwoofers capability actually damage the subs? Or do they just play the clipping with no real trouble?
Just asking because upgrading from a small amp and clipping a little to a big amp which doesn't clip has made my subs sound better than ever. I thought subs could play a clipped signal just not at high volumes?
Basshead Resources clipping means it's taking wall outlet......
No it doesn't. Google will back me up.
@@bassheadresources725 yup
Always a good idea to run a sacrificial automotive type incandescent bulb inline with your speakers as protection. You'll have to convert the voltage and watts to determine the right type of bulb to get. If you hammer on the subs the bulb will change the impedance and keep them from blowing. My Realistic Pro 4,000 monitors has these in them, if you hammer on them you can actually see them glow. Also keeps the DC from killing them.
I would use crest audio Qsc crown And of course lab groupen Amps
Believe it or not most output power transistors are good until like 300F
Do you listen to bugzy malone ???
Your subscribers are fast :)
Find a woofer that has coil damage. It's possible to blow that amp in a few moments. But it's impossible to blow some triple diffused silicon transistors.
Oh, ho. It's possible to blow anything. A-la photonicinduction.
hey can you blowout a speaker on an iphone or android?
too easy
pls use this song in one in you vids, you gonne love it
ponsuda. - DESIRE
Good video bro
Fire department: wtf we detected fire!!!
*few minutes later*
Doublsmm: da hell?
Fire department: oh nvm
What kind of audio set up is that
That, on the floor? That's one of the most dangerous atomic bombs ever made.
maybe DIY a high power amplifier so its quite powerful and cheap and wont be too bad if it fucks up
Well, as long as you dont buy cheap AF Amp from china it should (and in some cases must) have a Overvoltage protection, overcurrent(short circuit) protection, and overheat protection, in this case it must have it, because it transforms AC Voltage
Whats the song name at 3:32
What is the name of those white sub woofers
Dayton
RSS315HO-44's, yeh.
You should've changed the Line Voltage to 120, that would have fucked the amp up. Maybe not with the Daytons attached too.
Fix this amp and use it as a blower
They do work
Yes use the white van amplifier
Ok Come on . Sending dc output though the speaker voltage . Dude that doesnt even make sence .
You should get a car amp to blow a sub and sprakers instead of a cv amp
8:58 for a sec i thought he said don't blow amps using speakers and i was like wtf😂
I recently blew out my speakers. 😭
Oooooooh noice
Nice
Im not sure why i watch this channel... I think im jealous of the stereO.
Bro idk if it will work but try it in an hour cuz if it cools down it will work
you know when u wake up and see like 2 things is was just watching the wrong phone
SHIT FIRE ALARM XDDD
Sibbe when
Jerry's Shed its a joke
maybe the over heat protection kick the relay think
you just need to put a cooling fan on the heat sink
Or, you trick the heat-sensing relay into thinking it's cold. If you don't get the transistors hot, then it's never gonna blow..
what is the song at 2:30
2 chainz dresser
is this thing have amplifier IC
It's a Class AB amplifier. They don't use integrated circuits (like Class D amps do, the ones you mean)
SNDCX AB class for subwofer??? Wtf?
Paul Botirla why are you so confused about that? Why would a subwoofer amplifier not be allowed to use class AB? Most subwoofers use the Class AB style. Unless they're higher power. Class AB is incredibly cheap at low power (150w and less)
can you give it to me
You can just put out heatsink
he touched mdf..... aka medium density fiberboard.... somethings going to go wrong... hehe :D
it just overheated
Yes
Cool
IMO just about all consumer electronics have fuses that are oversized to the point that the most expensive component will smoke out to protect the fuse from blowing! Whenever possible, I will replace the stock fuse with one that is about 20% LESS amp rating. I noticed that you left the amp laying upside down or having the heat sink flat out instead of upright like it was in it's original enclosure. The fins should be vertical to promote convection cooling!
U should get a heater and use that as a test load than using a speaker. Buy two cheap meters. Set one to monitor the dc at speaker output. And current with another one. As the heaters resistance is pretty steady u will know how much power it is making just by using the ohms law. 3kw 110v heaters are close to 4ohms.
This amp did not blow up cus u didn't drive it into clipping for long enough. Clipping a speaker does kills it so use big dummy loads. Maybe invest in the amplifier dyno from smd.
Amm1 is all u need
5:08 why was the wire moving
sarvagya Vijay Prakash becauze that black wire was the output wire from the amplifire board and was close to an magnetic field generated by that transformer...
or just a high current
sarvagya Vijay Prakash magnetic feild created from the ac voltage coming out
Lots of wrong terms being used, but the jist is there. It's magnetism. The wire as well as the coil are inductors. One is an electromagnet and the other is also an electromagnet, but reverse phase.
yes
5:50
How ironic, an amp that you could blow up subs has been blown
the ground wire going up and down was magnetism from the toroidal. Shitty toroidal! they're inventions that are supposed to negate that.
Not realy. That black wire was gone up and down because as the amp put that 18 Hz and when the current pass to that loop along side the magnetism generated by the primery side of the transformer, the magnetic field generated by that to make that wire to move..
Lmao I’m here cause I just blew mine to 😂😭
I miss the 18s
5:07 what the fuck is happening with the black wire?
Mr. Spoilers magnetig field
I want smoke.
lol ive noticed every video starts with alright so or alright guys aha Love the videos keep up the great content :D
kill amplifier in 0.5 herts!
Good cheap sub amp xD
lol I have a Walmart kicker giving it 250 watts 🙃😂
Kicker is a kicker brand though.
Blowin Logitech z 640 please
Dow mar bass
Dow nor bass
underpowering speakers will blow them real quick...… I don't know the ratings for your subs. just sayin!
Underpowering won't do anything.
I can smell the subs and they have blown !!!!! 🙍😠😡😩
hi
its 12 inch but the amp is for 10 inch so i think its going to work
Amps don't care what size woofer you hook them up to.
193rd!
comment
2 like
I want the daytons to blow up
Nitro rc dude aren't they a bit to expensive for just being blown?
Skedda 150 bucks each on parts express.
In the US, yeah. But He buys them being located in the kingdom of Australia. :p
SNDCX Oh... I'd send him some for free if I could!
The One and Only Oh wow I thought they'd be more expensive. Maybe he blows them when they aren't being used and just stand in his closet.
You are talking too much
be careful man if u underpower your subs or any speaker then u could possibly blow them
what? are you being serious?
Yes its serious . Clipping a small amp can do more damage then overpowering a speaker .
+MARINLAW he didn't say anything about clipping
ExtremeBassLine underpowering your subs can kill them he said .
+MARINLAW yes he did and i was asking him if he was being serious or just kidding
AM I FIRST
no
Nice
Yes
Cool
yes
Yes
yes
no