Easy Removing A Stuck CV Joint Using A Chain. How I Wrapped A Chain To Remove A Stuck C/V AXLE SHAFT
Vložit
- čas přidán 7. 04. 2018
- On This Video, I Am Showing How easy it is to Remove and Replace A CV Joint without Hassle, Sometimes when they Are stuck Or There Is No Room To put a pry bar to push it out;
Here I Am Showing The easiest way to remove and install it.
• Easy Removing A Stuck ...
Thank You For watching my videos.
Thank you for all the comments.
I appreciate the calls that lots of people Throughout the USA make to my phone number, thanking me for record and uploading my videos, it makes me feel proud, that I am helping people to save or to make some money.
I am making my videos with lots of love and with the meaning of helping you people.
Here Is This Link If You Like To contribute. Thank You.
www.paypal.com/paypalme/Gabri...
Or on Cash App $GabrielAutoTech
If you found this video and it was useful,
Please Like It, And Subscribe To My CZcams Channel.
/ gabrielautotech
So you can help me,
And I can upload more videos.
Thank you.
(Take this daily, and you will never be sick again.
Toma esto a diario y nunca más volverás a estar enfermo.
Deleted CZcams video links.
Enlaces de los videos que CZcams quito.
Complete video, This is my way of expressing to everyone how much I appreciate you
THIS WILL CEASE THE FEVER IN 15 MINUTES OR LESS AND WILL NOT RETURN.
Video completo, Esta es mi forma de expresar a todos lo mucho que los aprecio
ESTO CESARÁ LA FIEBRE EN 15 MINUTOS O MENOS Y NO VOLVERÁ.
/ 119400480049501
In 15 Minutes This Formula Will Stop The Fever And Will Not Return.
En 15 minutos, esta fórmula detendrá la fiebre y no regresará.
/ 3235411909855650
Listen To The Full Recovery Testimony Of This NHS Doctor in London, UK.
Escuchen el testimonio de completa recuperación de este médico del NHS en Londres, Reino Unido.
/ 939781936495599
Testimony of the deleted video that CZcams doesn't want you to see.
Testimonio del video eliminado que CZcams no quiere que veas.
/ 2453856461581239 )
Thank you for choosing our services.
We always do our best to serve you better and fix your car properly.
Your Friendly, Expert Automobile Repair Technician.
With more than 40 years of working in the auto repair field.
I am working on cars since they have contact points ignition
and carburetors, when most of the built cars came with no air conditioning.
We Are Here To Help With All Your Auto Repair Needs.
We have the knowledge and the tools to do the job right.
Gabriel Auto technician
413 Highway 100,
Laguna Heights, TX.
956 346 3484.
Auto Repair Shop.
Auto Air Conditioning Repair and Recharge
Brakes,
Tune-Ups,
Radiators,
Shock Absorbers,
Water Pumps,
Timing Belts,
Oil Change,
Fan belts,
Struts,
Suspension,
Transmission Service,
Computer Diagnostics,
Paint and Bodywork.
Iron Welding.
Thank You for your like on our page @
/ gabrielautotech
Subscribe To My CZcams channel @
/ gabrielautotech
/ gabrielautotech
www.yelp.com/biz/gabriel-auto...
business.google.com/b/1158464... - Auta a dopravní prostředky
On This Video, I Am Showing How to Remove and Replace A CV Joint without Hassle,. sometimes they Are stuck Or There Is No Room To put a pry bar to push it out;
Here I Am Showing The easiest way to Remove and install it.
Thank You For watching my videos.
Thank you for all the comments.
I Appreciate the calls that lots of people Throughout the USA makes to my phone number, thanking me for record and upload my videos, it makes me feel proud, that I am helping people to save or to make some money.
I am making my videos with lots of love and with the meaning of helping you people.
Here Is This Link If You Like To contribute. Thank You.
www.paypal.com/paypalme/GabrielAutoTech
Or on Cash App $GabrielAutoTech
If you found this video and it was useful,
Please Like It, And Subscribe To My CZcams Channel.
czcams.com/users/GabrielAutoTechvideos
So you can help me,
And I can upload more videos.
Thank you.
( Take this daily and you will never be sick again.
Toma esto a diario y nunca más volverás a estar enfermo.
Deleted CZcams video links.
Enlaces de los videos que CZcams quito.
Complete video, This is my way of expressing to everyone how much I appreciate you
THIS WILL CEASE THE FEVER IN 15 MINUTES OR LESS AND WILL NOT RETURN.
Video completo, Esta es mi forma de expresar a todos lo mucho que los aprecio
ESTO CESARÁ LA FIEBRE EN 15 MINUTOS O MENOS Y NO VOLVERÁ.
facebook.com/143495585720650/videos/119400480049501
In 15 Minutes This Formula Will Stop The Fever And Will Not Return.
En 15 minutos, esta fórmula detendrá la fiebre y no regresará.
facebook.com/GabrielAutoTechnician/videos/3235411909855650
Listen To The Full Recovery Testimony Of This NHS Doctor in London, UK.
Escuchen el testimonio de completa recuperación de este médico del NHS en Londres, Reino Unido.
facebook.com/143495585720650/videos/939781936495599
Testimony of the deleted video that CZcams doesn't want you to see.
Testimonio del video eliminado que CZcams no quiere que veas.
facebook.com/GabrielAutoTech/videos/2453856461581239 )
Thank you for choosing our services.
We always do our best to serve you better and fix your car properly.
Your Friendly Expert Automobile Repair Technician.
People are funny. Im watching every possible way to pull out a stuck Axle. Pretty creative ideas. Shows i definitely dont know it all.
I was looking for this video... Finally
We're here to help. Thank you for watching.
First time I saw this method with the chain. Great tip. Thank you
A big👍 # 795
Stay safe, Joe Z
You the Man , Gabriel! Nobody has ever mentioned about centering the lock ring, I've seen so many guys just try to jam the cv axle in an hit it hard, its probably never properly seated. Such a simple trick, I love it! Only a real blue color guy like you can think of such a simple and elegant solution!
After 3 days of fighting with a CV axle this worked for me in 5 minutes. Thanks!
I've been doing it that way for 35 years. Nice to see people who think outside the box. Subscribed.
Yessir... Centering the ring is the most common sense thing to do...you are a true professional..mil gracias compa....
thank you Gabriel very much. My 1994 BA Astina automatic has very little room for pry bar, so now I will try this method. Hope is a precious thing.
Gabriel, Gracias Brother. I pulled both axles out of the boots with my hands but the inside cups stayed stuck in the engine. Yesterday I tried a crow bar, tried hitting it with a screw driver and hammer , tried vise grips but nothing worked. I quit after about 40 minutes of trying. Came home and look in youtube and came across this video. No one uses a chain it seemed but it worked for you and I tried it. Bought a 3 foot chain and 2 bolts with nuts and washers a Lowe’s today. Borrowed a slide hammer form advance auto.
I wrapped the chain around it and finger tighten the nut onto the bolt and attached the other side to the slide hammer.
2 pulls and this thing came flying off. AMAZING!!! Took me less than 10 minutes to get both of them out. I laughed so hard that something so simple could have worked so well. I now have a little case to store my “cv axles puller chain”. This dang thing is a life saving tool. Lol. Thank you so much man.
Yes, if 1, or 2 pry bars don't work, I use the slide hammer.
They have so many different uses, and they're not expensive at all. I recommend buying or making one, so you have one. You could make a heavy duty one using weight lifting equipment, and it would be nice to be able to change the weight on it. Home Depot sells threaded black steel pipe, with various types of threaded adapters, and endcaps.
thank you so much for making this video. All of the videos I have been seeing on CZcams everybody does the passenger side and that side is the easiest side so I appreciate you doing the hard side which is the driver side. I was trying to get the shaft out for 2 days and then I came across your video good looking out brother You saved my butt on this one.
Thanks for your advice, i did replace the hammer by passing pliers threw one chain link and did hammer the pliers, it did pop out really quickly.
Thank You Gabby! Pry bar has no leverage to pry against. The chain trick worked beautifully!
Gabriel, I just tried this by attaching a chain to piece of metal conduit that a a brick that slides on through the brick hole. Totally worked. Thank you!!!!!!!!!!!!!!!!!!!!!!!
Awesome video work and thank Father God for the patience you have 😄 Glory to Jesus Christ
Thank you so much. I used a chain and put a bolt and also used a small 5 pound weight as an impact to pull it out than you
Thank you. This video help me today to pull out a broken CV axle. The axle came out but left the CV cup on the transmission side in. I wrapped the chain around it and then use the slide hammer on it. After 4 or 5 wag the cup jumped out of the tranny. What a relief! Thanks again for your video.
I found your channel. I just subscribed.,great videos.
You are a good man thank you
thanks for the tip. You’re doing Gods work on youtube helping us Do It Yourselfers.
Thank you for taking your time on the explanation - your level of detail gave me the confidence I needed
I have used the chain twice once on an 18 year old, 111, 000 miles ... soaked with wd40 and in the third pull it came flying out .... a neighbor was about to call a tow truck to bring it to a service station ... same thing used the Chain ... thank you
Thank you for this. I am going to give it a shot!
Now that's awesome my friend and I love it!!!! BEAUTIFUL JOB!!!!!
You took great care of that vechile...great job!
Thank you from Canada that was helpful ..
Thank you Gabriel for making this video, with the steps you did explained everything in real time a truly gifted mecánico!
Hey, you are a very helpful, knowledgeable mechanic! Thank You! 1st of all, you did well with the title of this video. Many who post videos don't think out a good title straight to the point. That is what caught my eye as I was scrolling through axle removal videos. Calling it "Removing a stuck CV joint using a chain" was good. 2nd, your demonstration of how to hook up the chain and pull out the old CV axle was appropriate. I heard of guys using a chain to remove axle shafts before, but could not figure how they did it. The one item that I did not have was the slide hammer. So, after wrapping the chain around the inner part of the axle shaft and putting in the bolt/nut, I took the other end and wrapped it around the heaviest sledge hammer I had, I think it is 15 lb. Then I took the sledge, pointed the handle of the sledge away from the axle, and gave it a couple good tugs. About the 4th pull, the snap ring on the axle let go and the axle popped out. This idea of using a chain is a good one for me, and for others. Most everyone got some kind of chains laying around to use. Also, you were showing how to remove the axle from a Mazda. I own Pontiac Grand Prix's, front drive of course. The access to the inner part of the drive axle shafts next to the differential is easy to get to. Using a large pry bar is difficult because it is hard to swing the handle of the pry bar. I do not have a lift to raise car high enough for clearance. Also, one can buy axle removal tools, but the problem still remains of getting the end of the tool onto the inner end of the axle shaft. On the Grand Prix, that end of the axle shaft is quite bulky, and the power steering lines and transmission wiring harness wires are very close. In the past, I already damaged and had to fix those lines. Not fun at all to work in that area. Well, thanks for the good tips.
Thanks for the tip. I drill a hole in the boot and then attach the chain to the hole. i have a hook on the end of the chain to attach directly to the hole in the boot of the cv joint. Then yank it out. Great video.
Thanks a lot man you saved my ass! I didn't have a chain but one of those bike cables worked just as well.
Great idea with the chain and the puller. Never tried that idea but certainly will the next time. I've always used the grease on the cir clip too to hold it in place. Works every time. Thanks again for the video and the idea.
Thank you so much for putting this video together! I have a 2012 rav4 and axle was giving me the blues. I did this and it came right out. Saved me a ton of money.
Fantastic technique.
Cool trick with the chain!
Thank you Gabriel, Gracias amigo, for your help,
GREAT JOB BROTHER
Thank you!!
This worked for me. Your saved my ass…. subscribed!
Awesome video. Awesome trick. Thank You!
Very good ideas.
Wow!
The most efficient and less costly method to get a stuck CV axle in transmission out without causing damage. Unfortunately, I had damaged my seal before I found this trick. Thanks for sharing.
Thanks man! I used this today and it worked like a charm!
Great to hear!
Great video! Thanks for showing the chain puller tip. I will use that if I can't pry out my cv axle. Excellent video work!
Best of luck!
I appreciate you explaining all the details. Your video is easy to follow. I wish others were made this good. subscribed.
Thanks and welcome
The best
Many thanks for doing this. I have just used the technique on a Discovery 3.
Excellent!
I recently did some work for a friend of mine, a Army veteran who is battling cancer, and is on dialysis. He was broadsided by a young driver who was trying to beat the light through the intersection and he hit my buddy's 2010 Scion tc hard enough to push us from the center lane to the bus lane on the side of the 3 lane county road we were traveled on. The impact was centered on the left front tire and most of the damage was in the suspension on that side stopping right at the sub-frame. I tried to remove the cup end of the cv joint from the transmission for days with no results. I then decided to drill a hole in the "cup" and attach the hook from a nice stout come along and I then buried my big harbor freight pry bar a couple feet into the ground a couple feet with my mini sledge. I then hooked my come along and started ratcheting until I was as tight as I could. Then I put a flat pry bar on the other side and it came right out
Thanks for showing me bro😊👍2020.. What..😷✌
No problem 👍
i lIKE tHE tricky trICK pROCEDURE!! vERY wEEL dONE sIR! Thanks for sharing!!
Thank you for your excellent Video - it is very well explained without any unnecessary content !
It explains the situation and the solution very well in a way that most People will understand 🙂
Unfortunately it does not work for me as my driveshaft goes straight into the side of the gearbox - there is nothing to hold on to and nothing to pull the shaft out!
I will continue searching but I did enjoy your video and I did learn some valuable new techniques!
Kind regards, William.
Lots of details. Thanks very much. The repeated voice ads on the background is annoying though. It's blocking what you say quite a lot
don't look at the tusk of a gift horse.
Thank you for watching.
I had a slide hammer like your tool and the other end I make a fork shape metal plate for this kind of work.
Excelent vídeo, it helps me a lot. A saw that this model is the same as Mazda 6 2014. Thank you.
Glad it helped
The chain is a very good idea if you can't get it out any other way.
When I'm installing the inner cup, I put the gap of the clip at the 12:00 O Clock position on the Grove in the shaft, and push the shaft into the transmission with a firm push and it pops right in.
Next time I'll try the grease and see if there's a difference.
SAFETY FIRST, JACK STANDS ALWAYS.
Thank u.
thanks
Used small chain n wrapped other end around 10lb sledge worked on 4th tugg👍
Wish you were in my town, great video, great tips! Subscribed.
Thanks for the sub!
That's where I'm at with the passenger side Honda
gracias carnal! raza always gets shit done!!
Nice to watch a pro at work ... not some cut & shut cowboy!
I had 2008 GX470 that wouldn’t come out. Pry bar, 4’ long didn’t work. Chain and huge puller was a no go too. Finally put it in neutral and rolled the axle 90 degrees, it popped out with a screw driver. Excellent video Sir, thank you.
Ok I subscribe
Always use a torque wrench for the axle nut , and the lug nuts. the other nuts you can get by without it but its still better to torque them too. I understand, when you do this work a lot,you get a feel for fastener tightness. But lug nuts and axle nuts should be torqued. Rock on!
Hi Gabriel, can you tell me what type of grease you used to hold the snap ring in place? Thanks for this video.
Will this work for a 03 dodge ram 1500 4x4 front axle
That is an ecellent trick
Driver's side 2002 Ford Focus couldn't pull it out so bought a length of chain and got it wrapped at the back of the axle at the trans case and a bolt and nut holding it tight and wrapped the other end with another bolt to my van cross member and got it out with a gentle pull reversing the van. Made sure I had room to accomadate the van, big parking lot. I didn't have a slide hammer. Then of course, the replacement axle wouldn;t fit through the wheel hub when test fitting before shoving into the trans.Waiting for replacement to come, should be here soon. Will DEFINATELY use your grease and clip alignment technique when it finally gets here. That should save me from a leaking trans, and since I bought synthetic Motorcraft manual trans lube which costs an arm for one bottle and a lg for two bottles.I don;t want to leak any of THAT stuff!! Zetec and MTX75. Oldie but goodie.
Can you please answer a question for me 1, is the clip at the end of the axel sopse to be sticking out from one-sided or flushed on both side ? 2 can i use grease used to grease up my grease joints also to grease up my axel female fitting?
What type of grease did u use
Or can any grease be applied there
So, use a chain and slide-hammer so all the force is transmitted to the CV. Beats using a ratchet strap which will always have some stretch and wasted effort!!
I have a 99 Lexus es300 and the CV is stuck. I used the slide hammer with no chain just the collar and it won't budge
I Have a 2005 PT Cruiser drivers side cv joint stuck, must be the circle clip. I will try the chain with a slide hammer
What would you do if that does not work?
It happes to me on a ford escort, I couldn't take both c v shafts off.
On that case I have to remove the transmission off and break it.
We have to find another tranny case to transfer the parts.
I know The shafts most of the time are easy to remove, but that escort was a pain.
Please let me know what happens.
Thank you for watching.
Ratchet strap is much thinner and is able to get behind that lip(where the pry bar goes) ratchet and pops right out.
Passenger axle took me 6hours by myself with no past experience
Did the driver side axle in 45minutes after I learned to tie a strap and ratchet
That's was far from stuck