2008 2014 Mercedes Benz C300 C280 Used Transmission Control Module Reset
Vložit
- čas přidán 5. 09. 2024
- If you need parts or accessories for your Mercedes Benz click link below:
Mercedese Repair Info
www.startekinf...
Mercedes Parts
amzn.to/3S0Z11y
Mercedes Accessories
amzn.to/3HDdFY6
Don't know how to start Thanking this Brother for his inspiration, I'm in Maryland and spoke to him on the phone about a 09 Mercedes C300 and within 2 mins I solved the problem, you the Best Man
Hi i being watching ur videos they are really helpful thanks 4 making them.
I have a question hopefully u can answer it, i have a 2008 mercedes E350 amg i need to change the transmition conductur plate, what wepside would you recomend me to get a good one, and also do i just replace it or needs to be program it in some way and if it needs to be programe it can they do it before i replace it or needs to be done after instalation thanks in advance.
My 08 C300 4Matic TCM code came up and is stuck in 1st gear. I need some help ASAP.
your videos and information are excellent and very helpful
good day, i really appreciate the time you take out of your day to make the videos. I have a question regarding a used transmission I bought this week and I own a 2011 c300 mercedes benz rear wheel drive. It is not a 4matic. Do I need to progragram this transmission for my car? It is not working. I was told no programming was needed.
Where is your workshop located? I have a problem with my Mercedes C300.
Sir please where is your shop are you in Dallas Tx
Do you reprogram or sell used TCM for Mercedes Benz c300 2011
Excellent!!. Please, where's your shop located in New york .
1287 utica ave
I'm so happy and satisfied at the same time with this video. I could feel it in your voice sir and in the customers facial expressions. Sir if you didn't virginize the transmission what will happen if you drove it like that?
it will stay in limp mode due to immobiliser system it has key data in it
@@BestCarFixes Oh I see, any connection between immo system and transmission?
Hi Mohammed, I really didnt understand why this procedure. Please what was change on the car? Was it the transmission itself or the transmission control unit? If it is only the transmission itself that was changed why renew the control unit? Thanks
Do you ever transfer the data from the original TCU to the donor TCU... Or do you just renew them all?
I am in Canada and my transmission on my 2010 c300 mercedes is giving a slam when it down shift. I dont know how you can help me out
Hey Mohamed, how may I contact you, I’m in Florida
Hola Mohammed...me podrías decir el nombre del conector para la tcm q usaste en ese procedimiento 😅😁
Hi can you please suggest how to fix error code p0606 component y3/8n4 fully integrated transmission control unit is faulty. Can i service or have to replace the sparepart ?
I have a 2013 Mercedes C300 and it does not start and the computer does not read any signal from the transmission that my car may have... There is no power signal or anything to the transmission. Please help me, I just bought the car.. 😿
Might need you
Gracias excelente trabajo Bendiciones por que se hizo ese procedimiento
you welcome
Hi Mohammed can I know where I can get the cable connection
Hey Bro Mohammed my TCM is not transmitting any data to the ECU.
Where u located?
Verry goooood job thanks you
Thank you
Hey bro Mohammed this is another car's used tcu?
Why you didn't do teach in drive authorization for it?
It does that automatically without it and works fine ?
As you mentioned at the end only virginize and drive. Even the vin number isn't important
Yea some of these car no need any thing
Were are you loated
السلام عليكم اخ محمد
Pls where is your repair shop located? I have a similar issue with my c300 (2010). I want to come right away!
I'm at Brooklyn NY
@@BestCarFixes where in Brooklyn? Or could you kindly drop a phone number? Are you on instagram? Maybe I can message you there and give you my number
What wires u took form the transmission to make that plug
the male connector that goes in to the transmission plug
Hay bro my 2006 Mercedes-Benz cls500 stock on Drive can you please help me
Your 2006 Mercedes-Benz CLS500 getting stuck in the Drive gear is an issue that could be caused by a variety of factors. These can range from issues with the transmission itself, to problems with the software controlling the shifting, to even a failing shift lock solenoid.
Here are a few potential steps to troubleshoot the problem:
1. Check Transmission Fluid Level and Quality
The first thing you should do is check your transmission fluid level and quality. Low or old/burned transmission fluid can cause issues with shifting. The transmission fluid should be pinkish and nearly clear. If it's brown or has a burnt smell, you may need to change it.
2. Diagnose Electronic Issues
If the fluid level and quality look fine, the issue may be with the software that controls the shifting. Mercedes-Benz vehicles use a system called the Electronic Selector Module (ESM) which communicates with the Electronic Control Unit (ECU) to control the transmission.
Sometimes, an error in the ESM can cause the transmission to get stuck in a specific gear. A professional with an OBD-II scanner can read fault codes from the ECU, which can indicate if there is an issue with the ESM or another electronic component.
3. Inspect Shift Lock Solenoid
The shift lock solenoid is a safety feature that prevents the driver from shifting out of park unless the brake pedal is pressed. If this component is failing, it could potentially cause issues with shifting. A mechanic can inspect this component for you.
4. Professional Transmission Inspection
If none of these steps resolve the issue, there may be a more serious problem with the transmission. It's recommended to take your vehicle to a professional who can diagnose and repair transmission issues.
Remember that attempting to force the gear shifter can potentially cause additional damage to the transmission. It's recommended to have the vehicle towed to a mechanic rather than driving it in a potentially damaging state. Always ensure to consult with a professional when dealing with significant mechanical issues.
Mashallah
Ct area
Brooklyn ny call me 347-228-1875
We're are u from I need help on mine my cars bee sitting for months and months and I still can't figure it out everyone tells me to sell it .I'm in California
We are in the same boat..
Do you reprogram or sell used TCM for W204 2009
where are you located ny