good day why put tow inveters in parallel if you can put one inveter a 20 kva three fase hi voltich with 4x 5.1 kv batties wont it charge faster an wirk better
Hello, what happens in case of a grid blackout during the day time? Does the inverter continues feeding the house with electricity from the PV or from the batteries?
@@g1technicalsolar thank you what is the correct protocol to start up the parallel inverters?? Do you first switch them on with battery and then set them up as master and slave then switch them of and on again and see if they are communicating properly ones they do do you switch them of again and then connect the load outputs and put them together into one breaker so the 3 reds together in the breaker 3 yellow together and then the 3 blue together and start them up again? Or do you put the 3 outputs on 3 separate breakers first ten from the 3 speperate breakers combine them into one breaker?
@@g1technicalsolar are you happy with this inverter? Does it support well the inductive loads? Did you test it with inductive loads and with unbalanced loads?
good day why put tow inveters in parallel if you can put one inveter a 20 kva three fase hi voltich with 4x 5.1 kv batties wont it charge faster an wirk better
Am connecting the same inverters in parallel bt there is a recurring warning error over current what might be the cause?
you program parallel yet.
Hello, what happens in case of a grid blackout during the day time? Does the inverter continues feeding the house with electricity from the PV or from the batteries?
Hello sir! you can use the Time of use function
@@g1technicalsolar do you combine all the load outputs of the 3 inverters in 1 3 phase break?
Yes sir output voltage is combine.
@@g1technicalsolar thank you what is the correct protocol to start up the parallel inverters??
Do you first switch them on with battery and then set them up as master and slave then switch them of and on again and see if they are communicating properly ones they do do you switch them of again and then connect the load outputs and put them together into one breaker so the 3 reds together in the breaker 3 yellow together and then the 3 blue together and start them up again?
Or do you put the 3 outputs on 3 separate breakers first ten from the 3 speperate breakers combine them into one breaker?
@@g1technicalsolar are you happy with this inverter? Does it support well the inductive loads? Did you test it with inductive loads and with unbalanced loads?
what is the grid supply?
this i just installed it for testing. if i supply 3phase 220V/380V. or you can watch for my full installation next video. thanks
czcams.com/video/8TsCQHfKiIA/video.html
is this inverter reliable?
I saw master and slave from your video, but I need it for 5 inverters i want to connect them can you help me
The principle remains the same for the Lan cable (Master-slave) configuration