Important. You must first make sure that the "Common" wire that you mentioned first is Actually the Hot ( Live, power )wire and connect That wire to the timer device.
Hi Redd dogg, Thank you for the feedback! We are happy to see our video of the ST01 installation was helpful for you. Thank you for being a customer, and don't hesitate to reach out if you need anything. All the best, LisaG :)
Thank you for the video. Trying to use the ST01 timer switch on outside lights that are controlled by two switches. On my existing three way switch the wires that I would connect to the red and black wires on the timer are both the same color. How do I know which wire to connect to the jumper wire on the other switch that controls the lights?
Hi Brian, and Thank You for the question. I recommend you contact our Technical Services team so they can walk you through it over the phone. You can call them at 815-675-7000, M-F, 8 AM to 4:30 PM, CST. When you call be sure to ask for Mike. Thank you for being a customer, we appreciate you. Let us know if you ever need anything else. Have a great day! LG
@btburnem , Thank you for the question. We recommend you contact our technical services team who will be able to answer your question over the phone. You can reach them at 815-675-7000; their office hours are Monday-Friday, from 8:00 a.m. to 4:30 p.m. CST. Thank you again for the question and thank you for being a customer. LG
This 'how to' has some information that the other Intermatic ST01 installation video doesn't have! "Dan" says @ 1:49 " Make note of the color of the wire you connect to the BLUE wire from the timer".... the first video doesn't mention this at all. Why have 2 DIY's on line and only one has complete information? Other than that no complaints!
I believe the other is for a single pole installation -- where there is only one switch that controls the light -- you do not use the jumper cable for those, etc.
Good morning, Carlos. Thank you for contacting us. Please give our Technical Services team a call at 815-675-7000. Our office hours are M-F 8 AM to 4:30 PM, CST. They can walk you through the setup over the phone. Thank you for being a customer and let us know if you have any questions. LG
Hi markheartland2, Thank you for reaching out to us. I am recommending you contact our Tech Support team to assist with your question. You can reach them by calling 815-675-7000, or by Live Chat on our website. Office Hours are M-F 8AM to 4:30PM CST. Thank you for being a customer! LG
Hello, Yes, you can connect it to a 4-way switch. If you'd like direction on how to do so, please get in touch with our Technical Support Team at 815-675-7000. Thank you!
@@JuanChavez-uw7nl I called them long time ago, the same BS, he can't give me diagram, no diagram from company available. I have to buy 2 st01 switch and he would walk me. I don't think that is possible, with 2 timer connected, he is full of BS.
Sal112350 We are sorry that you didn't get the information you were looking for. here's a link to the instructions for the ST01: dtrermj9469s.cloudfront.net/userfiles/images/inriver/original/10023_st01-ei600%20series%20instructions%20en.pdf Let us know if there is anything else we can do for you. Thank you for being a customer. LG
The video states that this equipment requires that your switch has constant voltage. There is no attempt to explain this, nor is a redirect provided to useful information. My own search does not yield clear information about how to evaluate my switch, much less a helpful definition.
Hi, @ml_haskell3854! Thank you for reaching out to us. We’re sorry you were unable to find more information regarding the need for "constant voltage" when installing this timer. We want to ensure you get all of your questions answered, so we recommend that you contact our technical services team, who are very capable of assisting you. You can reach them at 815-675-7000; their office hours are Monday-Friday, from 8:00 a.m. to 4:30 p.m. CST. Thank you for contacting us, and thank you for being a customer. LG
Hi Corey, Thank you for reaching out to us. Here is the link to the 4 way wiring diagram you requested, drive.google.com/file/d/128LdHp70W2NqYeqqcBcsZFdSMyWk2p0T/view?usp=sharing NOTE: It's important to remember to keep the distance between switches less than 100 feet. Please let us know if you have any difficulty viewing it, and don't hesitate to contact our Technical Services team by calling 815-675-7000. Their office hours are 8:00 AM to 4:30 PM Central Time, Monday- Friday. Thank you for being a customer, we appreciate you! LG
Good morning Corey! I would recommend giving our Technical Services team a call at 815-675-7000. They can answer all of your questions and walk you through it over the phone. They love what they do, and they love helping our customers. Tell them Lisa sent you :) Thanks again for being a customer, and let me know if you need anything else. LG
The code you are referring to is the white (neutral or grounded conductor). The common on a 3-way does not mean neutral or grounded conductor. All 3-ways have one common wire, and 2 traveler wires.
Great installation video - no swearing invoked when installing it
Thank you for the feedback! We're glad you found the video helpful, and even happier no swearing was involved. Thank you for being a customer! LG
Important. You must first make sure that the "Common" wire that you mentioned first is Actually the Hot ( Live, power )wire and connect That wire to the timer device.
Very well done. Thank you so much!
THANK YOU SO MUCH FOR THIS VIDEO. SO NICE NOT TO HAVE TO HIRE SOMEONE. THANK YOU THANK YOU THANK YOU!!!
We're so glad it helped, John!
Thank you. This was extremely helpful.
We're glad it helped!
This video was helpful !!
Thank you
Hi Redd dogg, Thank you for the feedback! We are happy to see our video of the ST01 installation was helpful for you. Thank you for being a customer, and don't hesitate to reach out if you need anything. All the best, LisaG :)
Thank you for the video. Trying to use the ST01 timer switch on outside lights that are controlled by two switches. On my existing three way switch the wires that I would connect to the red and black wires on the timer are both the same color. How do I know which wire to connect to the jumper wire on the other switch that controls the lights?
Hi Brian, and Thank You for the question. I recommend you contact our Technical Services team so they can walk you through it over the phone. You can call them at 815-675-7000, M-F, 8 AM to 4:30 PM, CST. When you call be sure to ask for Mike. Thank you for being a customer, we appreciate you. Let us know if you ever need anything else. Have a great day! LG
It doesn't work like a tree way swicht.
He had to turn it on one side and turn it off on the other
Is the wiring done the same way if the ST01 is used at both junction boxes? Specifically, the jumper wire? Thanks!
@btburnem , Thank you for the question. We recommend you contact our technical services team who will be able to answer your question over the phone. You can reach them at 815-675-7000; their office hours are Monday-Friday, from 8:00 a.m. to 4:30 p.m. CST. Thank you again for the question and thank you for being a customer. LG
This 'how to' has some information that the other Intermatic ST01 installation video doesn't have!
"Dan" says @ 1:49 " Make note of the color of the wire you connect to the BLUE wire from the timer".... the first video doesn't mention this at all.
Why have 2 DIY's on line and only one has complete information?
Other than that no complaints!
I believe the other is for a single pole installation -- where there is only one switch that controls the light -- you do not use the jumper cable for those, etc.
How can I view a similar video for the ST700W with a dimmer switch at the other location. Thanks
Good morning, Carlos. Thank you for contacting us. Please give our Technical Services team a call at 815-675-7000. Our office hours are M-F 8 AM to 4:30 PM, CST. They can walk you through the setup over the phone. Thank you for being a customer and let us know if you have any questions. LG
Does it matter which switch is first in the circuit?
Hi markheartland2, Thank you for reaching out to us. I am recommending you contact our Tech Support team to assist with your question. You can reach them by calling 815-675-7000, or by Live Chat on our website. Office Hours are M-F 8AM to 4:30PM CST. Thank you for being a customer! LG
Can you connect the ST01 on a 4 way switch?
Hello, Yes, you can connect it to a 4-way switch. If you'd like direction on how to do so, please get in touch with our Technical Support Team at 815-675-7000. Thank you!
Can you create a video how to make it work with a 4 way
@@JuanChavez-uw7nl I called them long time ago, the same BS, he can't give me diagram, no diagram from company available. I have to buy 2 st01 switch and he would walk me. I don't think that is possible, with 2 timer connected, he is full of BS.
Sal112350 We are sorry that you didn't get the information you were looking for. here's a link to the instructions for the ST01: dtrermj9469s.cloudfront.net/userfiles/images/inriver/original/10023_st01-ei600%20series%20instructions%20en.pdf
Let us know if there is anything else we can do for you. Thank you for being a customer. LG
You want to make your ground up first
The video states that this equipment requires that your switch has constant voltage. There is no attempt to explain this, nor is a redirect provided to useful information. My own search does not yield clear information about how to evaluate my switch, much less a helpful definition.
Hi, @ml_haskell3854! Thank you for reaching out to us. We’re sorry you were unable to find more information regarding the need for "constant voltage" when installing this timer.
We want to ensure you get all of your questions answered, so we recommend that you contact our technical services team, who are very capable of assisting you. You can reach them at 815-675-7000; their office hours are Monday-Friday, from 8:00 a.m. to 4:30 p.m. CST.
Thank you for contacting us, and thank you for being a customer. LG
Need a 4 way diagram or illustration
Hi Corey, Thank you for reaching out to us. Here is the link to the 4 way wiring diagram you requested, drive.google.com/file/d/128LdHp70W2NqYeqqcBcsZFdSMyWk2p0T/view?usp=sharing
NOTE: It's important to remember to keep the distance between switches less than 100 feet.
Please let us know if you have any difficulty viewing it, and don't hesitate to contact our Technical Services team by calling 815-675-7000. Their office hours are 8:00 AM to 4:30 PM Central Time, Monday- Friday.
Thank you for being a customer, we appreciate you! LG
I have a 4 way in between 2) 3 way switches. Your diagram shows replacing the 4 way switch with timer switch. Is this correct?
Good morning Corey! I would recommend giving our Technical Services team a call at 815-675-7000. They can answer all of your questions and walk you through it over the phone. They love what they do, and they love helping our customers. Tell them Lisa sent you :)
Thanks again for being a customer, and let me know if you need anything else. LG
how is common black? thats not code
The code you are referring to is the white (neutral or grounded conductor). The common on a 3-way does not mean neutral or grounded conductor. All 3-ways have one common wire, and 2 traveler wires.