Video není dostupné.
Omlouváme se.
How to remove the A-Pillar trims VW GOlf 7
Vložit
- čas přidán 19. 07. 2019
- A short video on how to remove the A-Pillar trims on your Volkswagen Golf 7.
It will be the same on any car with an airbag on the pillar, the trim will not come easy out because of the clips.
Metal clips OEM number: 5G0 867 276 B - 1 Euro One pice
Here are some AliExpress links to cheap tools that I use daily in my workshop:
Plastic removal tool:
-11 pieces removal tool set (I have bought this one for almost 3 years and I still use it)
s.click.aliexpr...
-22 pieces removal tool set
s.click.aliexpr...
-7 pieces ceap removal tool set
s.click.aliexpr...
Torx:
-Torx Screwdriver Set from T5 to T30
s.click.aliexpr...
-Long torx Screwdriver T15 T20 T25 T27 T30(use torx t20 to remove the car exterior door handles almost all cars have this screw)
s.click.aliexpr...
Small Electric Drill Cordless Screwdriver:
s.click.aliexpr...
Hooks:
s.click.aliexpr...
Flexible Magnetic Pick Up Tool:
s.click.aliexpr...
Rubber Eraser disk:
s.click.aliexpr... (i use this to remove old Stickers and Glue Adhesive left on car)
LED Flashlight:
s.click.aliexpr...
Infrared Thermometer:
s.click.aliexpr...
Check out my other CZcams channel / carhax
❗Check any car's mileage and accident history with carVertical 👉 bit.ly/3b6S8pI
Here are some cheap tools that I use daily in my workshop:
Plastic removal tool:
-11 pieces removal tool set (I have bought this one for almost 3 years and I still use it)
s.click.aliexpr...
-22 pieces of a removal tool set
s.click.aliexp...
-7 pieces of cheap removal tool set
s.click.aliexpr...
Torx:
-Torx Screwdriver Set from T5 to T30
s.click.aliexpr...
-Long torx Screwdriver T15 T20 T25 T27 T30(use torx t20 to remove the car exterior door handles almost all cars have this screw)
s.click.aliexpr...
Small Electric Drill Cordless Screwdriver:
s.click.aliexpr...
Hooks:
s.click.aliexpr...
Flexible Magnetic Pick-Up Tool:
s.click.aliexpr...
Rubber Eraser disk:
s.click.aliexp... (I use this to remove old Stickers and double side tape left on the car after I remove badges)
LED Flashlight:
s.click.aliexpr...
Infrared Thermometer:
s.click.aliexp...
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for your support!
WARNING: This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK.
A tip for removing the trim. If you look at the clips, there are teeth that seem to keep the tab from coming out. In the video, note that the slot that these two clips rest in are slotted. Instead of using a lot of force to remove the trim, pull the trim until it stops. Take a long, thin screwdriver and slide each of the clips upward. They will disengage from the trim allowing you to pull the trim away. The clips will remain in the slot. I removed the clips from the slot so that installation would be easier. I essentially had to crush the clips to get them out and use new clips. Doing the revers screwdriver trick would have been too tricky.
Any idea on the part number for the 2 stage spring clips or where I can find them in uk? Cheers
Or maybe some assorted picks from harbor freight :)
@@msmith508maybe :)
Perfect! Well done showing the back of the trim with detailed info about clips and pillar hole locations. I've seen another blog but it didn't help like your video has! The mounting clip for the lower window trim u remove after the A pillar is notorious for rattle noises. Some tesa felt tape fixes it. Now I'm ready to fix it!
Thanks!! I was losing my mind, i could see the clips but did not understand why they were not like the normal ones!
Did you video the reinstall? Im having a really hard time reinstalling them. Removal you can just yank real hard but the install fitting the end of the pillar in place is very hard trying to get everything lined up and the parts that need to bend you dont really have control over from the opposite end of the pillar.
I got it! It seemed impossible. It will not slide just right in, the dash and window trim pieces it has to slide into require a lot of twisting and the only way that worked required me to significantly push down on the compressible dash to squish it in. Pretty nerve racking but the dash did not get scratched or torn.
Help me To remove The side pannel where is located The sea bealt side driver. .I have many noises from that direction ..some plastics or wire touch togheter
Im having some noises near a pillar. But im worried to break something
Hi, I have a scirocco is the removal similar ?
Thank you. Highly recommend!
I’m just going to go ahead and order the replacement clips before installing, because I know i’ll probably break them
What is the part number for that part?
Thank you very much :)
U are my hero 🎯😍
😁
good video
Excellent 👌
Min is harder to get back on than it was to remove.
Spray the clips with some WD-40 and make sure that the clips are aligned with their slots
What are the part numbers for the clips? I can only find one type
Metal clips OEM number: 5G0 867 276 B - 1 Euro One pice
Mine wont come off
Awsome thank you