I watched this video a long time ago and did not "like" it. Then I spent over an hour this morning looking for this particular video so that I could remember how to read the speed settings from the controller (add that to the title, it is WIDELY searched). Then my preview time changed from 1 1/2 hours to 3 hours. Needless to say I "like"d the video this time. Thank you for sharing. Like this video and save hours, literally
I have to tell you this video is Awesome with the tips that I learned I watched your other video about other tips and that changed my game thank you so much for your time
I like your substance in your videos. I am looking for an option to start my own business, yet be mobile. I want to start with a small engraver to do flat surfaces and work toward cylinder surfaces. I like watching you and what you have learned. It will help me. I plan on starting small in 2022, working it up to my retirement in 4 yrs. Then leave my employer as my business should be self-sustaining.
I started with a diode laser and quickly moved to a co2 laser. there is so many things you can do with these machines. good luck with your plan. Find what you enjoy making and you will be successful.
So glad I found your channel. I ordered a Thunder Lazer Nova 51-130w and can’t wait till it arrives. So I have been watching all your videos so I’ll be a little ahead when it arrives. My question is what kind of computer or lap top do I need or can I use an iPad and do I need Internet 100% all the time to make it work. I live in the country and we lose Internet a lot out here.
LightBurn doesn’t work on an iPad so you will need a computer pc or Mac. there seem to be less issues with a pc. you can work 100% offline. you do not need the internet in any way to operate your Thunder laser and LightBurn..
Can we address this is the first time in my life ive seen someone using their forefinger to scroll a mousewheel?! On a serious note though, one or two of those tips are gonna help me a lot, kudos.
Just use the middle scroll wheel to place it where you want it. There is no reset. Thats all best done with your middle mouse wheel! Thanks for the questions
Robert .... thanks for all you do ............... I've tried several times to leave a few bucks to and for some reason it doesn't seem to let me finish. Any Suggestions?
Sorry to hear that, and thank you for trying to donate. are you signed in to your account on CZcams. if not that may be the problem. I haven’t had anyone indicate issues like this. I will check this out further. thanks again for watching
@@computercreationz yes .. youtube is signed in. .. it keeps telling me the info i've entered for my payment is not correct ... but it is .. and there is more than enough money in it to cover what im trying to do ...
@@computercreationz Thanks to you I have developed an Art Library where I store all my Lightburn files that I don't want to lose. It will not take me long to reach the memory capacity in the controller and I have to delete files. Should I still save them as Lightburn files and store in the Art Library?
I watched this video a long time ago and did not "like" it. Then I spent over an hour this morning looking for this particular video so that I could remember how to read the speed settings from the controller (add that to the title, it is WIDELY searched). Then my preview time changed from 1 1/2 hours to 3 hours. Needless to say I "like"d the video this time. Thank you for sharing.
Like this video and save hours, literally
glad the video was finally helpful for you. appreciate the honest input and tip.
Thanks for another easy to follow video… your explanations are simple and helpful! I’m interested in your follow up on fill + line…great job 🙂
thank you it will be in in a week or two.
Nice demonstration and explanation as usual. Thank you
Glad you liked it! Thank you for watching!
Lots of good tips.
Mouse was one of the first things I went looking for when I got LB.
Material Library I just found recently.
Thanks
I love the library’s they have. they help allot! Thanks for watching
I have to tell you this video is Awesome with the tips that I learned I watched your other video about other tips and that changed my game thank you so much for your time
Awesome! Thank you!
Great information... I need to get going on those art and material libraries...
It will make a difference later
great info...thank you....
i wish your lightburn videos were all in one play list...be easier to find and watch then.
Great suggestion!
I never knew about the fill/wireframe thing! Thanks for that, and for the reminder about QR codes which I do really need to play with.
I use both quite a bit, give it a try. thanks Jo!
Very usefull thanks
you are Welcome 😊
I like your substance in your videos. I am looking for an option to start my own business, yet be mobile. I want to start with a small engraver to do flat surfaces and work toward cylinder surfaces.
I like watching you and what you have learned. It will help me. I plan on starting small in 2022, working it up to my retirement in 4 yrs. Then leave my employer as my business should be self-sustaining.
I started with a diode laser and quickly moved to a co2 laser. there is so many things you can do with these machines. good luck with your plan. Find what you enjoy making and you will be successful.
Great Job thanks for sharing good stuff
Thanks for watching!
Thanks for the great content!
Glad you enjoy it! thanks for watching!
Great stuff as usual. Keep it up.
Thanks, will do!
excellent video. thank you
You are welcome!
So glad I found your channel. I ordered a Thunder Lazer Nova 51-130w and can’t wait till it arrives. So I have been watching all your videos so I’ll be a little ahead when it arrives. My question is what kind of computer or lap top do I need or can I use an iPad and do I need Internet 100% all the time to make it work. I live in the country and we lose Internet a lot out here.
LightBurn doesn’t work on an iPad so you will need a computer pc or Mac. there seem to be less issues with a pc. you can work 100% offline. you do not need the internet in any way to operate your Thunder laser and LightBurn..
@@computercreationz awesome thanks for the reply!! Helped a lot. Now I know what to get!
Amazing
thank you!
Wow ,,QR CODE , THis software is amazing,
yes! they are very handy!
Nice tutorial
Make a tutorial of full image process please
Thanks for your comment, I appreciate you watching
Can we address this is the first time in my life ive seen someone using their forefinger to scroll a mousewheel?!
On a serious note though, one or two of those tips are gonna help me a lot, kudos.
lol, drives me nuts to use my middle finger. although I would like to sometimes ! thank for watching!
Hi mate do you have a video on ways to make a jig I seen you did one at start of video would like to know how to do one of them?
czcams.com/video/kfhS7Rnv_u8/video.html
At the end of the video. You were showing zoom in zoom out. How do you reset the grid back to normal? Thank you
Just use the middle scroll wheel to place it where you want it. There is no reset. Thats all best done with your middle mouse wheel! Thanks for the questions
Robert .... thanks for all you do ............... I've tried several times to leave a few bucks to and for some reason it doesn't seem to let me finish. Any Suggestions?
Sorry to hear that, and thank you for trying to donate. are you signed in to your account on CZcams. if not that may be the problem. I haven’t had anyone indicate issues like this. I will check this out further. thanks again for watching
@@computercreationz yes .. youtube is signed in. .. it keeps telling me the info i've entered for my payment is not correct ... but it is .. and there is more than enough money in it to cover what im trying to do ...
I work on Lightburn from 2 computers (design on my desktop and burn from my laptop). How do I share ALL my designs from both?
use something like Google drive or other file sharing app.
@@computercreationz Thank you! Also, I have been getting movement lines when I am cutting or engraving. How do I stop that from happening?
When you operate from controller to you still put files in art library?
The art library is designed to be used as you design before you send to the controller
@@computercreationz Thanks to you I have developed an Art Library where I store all my Lightburn files that I don't want to lose. It will not take me long to reach the memory capacity in the controller and I have to delete files. Should I still save them as Lightburn files and store in the Art Library?
Can you email the sample of your burn to the customer from LightBurn?
Not that I’m aware of. You can save an image of the preview of the design
Hi... I was looking at your tip on QR code...can you scan it to your Instagram account? Thanks for your tips 😊
Yes any link you want, just copy the link before,you,generate the QR code past in your link. Don’t make the, less than 1/2”. Thanks for watchimg
@@computercreationz okay I'll try it out. Thanks