The Secret to remove Jeep Wrangler Doors
Vložit
- čas přidán 23. 08. 2023
- Jeep Wrangler doors can be a frustrating challenge to remove. In this video, we'll show you the correct way to remove Jeep Wrangler doors, using 8 easy steps.
This will work on Jeep Wrangler Sport, Jeep Wrangler Sahara, Jeep Wrangler Rubicon, Jeep Wrangler 392, Jeep Wrangler 4XE
Looking for Jeep wrangler Accessories? click here amzn.to/45K5N2a - Auta a dopravní prostředky
Bro did not just call a dewalt a makita
Ikkkk
He totally did....loser
Calls a station wagon a jeep
Ok, good. It wasn't just me.
Hahaha you high bruh
Only a true Jeep owner would call a DeWalt and Makita 😂
and think that the handle that's there in damn near any car is specifically for the doors to come off
They also call their fiat a Jeep
It’s a Jeep thing. You wouldn’t understand. 🤪
It's to create engagement in the comments. Common tactic now for content creators to say something incorrectly.
I like my old school jeep. I just remove the limiting strap and lift up on the doors 😂.
back when jeeps were jeeps
@@superbruh8936 Yup, when you had to unbuckle yourself while driving on the highway to reach the rear passenger seat door to close the window.
The bolts aren't really needed on JLs. Many, many jeep owners just keep them off permanently. Then the only step extra than you mentioned is just unplugging the wire harness.
@backwoodstherapy I keep them out all the time. I just put them in for this video.
@@mct6902
Rear passenger seat door? Never heard of a jeep with rear doors.
80% of owners will never remove the doors
80% of youtubers are arm chair keyboard warriors.
and 1/2 of them will NEVER go offroad with them
But you can if you want.. I love people picking on other cars... They must feel really insecure. @@RickHoffman777
@@xxBLKSNXxxthat’s just how it is. jeep sold 2 wheel drive wranglers for like 5 years
I have a 07' 4 door Wrangler, I constantly mud and off road, I have a soft top so i can bare bones it, mines lifted and my Gen of jeeps doors come off much easier then this, also this guy makes me cringe, these are the jeep owners that I hate, if you buy a jeep, get one and you better off road the fuck out of it.
If Kermit the frog was a human
Isnt that more jordan petersons thing though?
Dewalt my friend. I guess the Jeep’s color is kinda close to a Makita.
There are yellow Makita’s but this ain’t that. It’s not a Dewalt either. It’s a Temu knockoff.
#9 re-pin your connector because you pulled it apart by the wires!!!!
Was literally looking for this comment thank you
I QC wiring harnesses for Roush. Thats literally one of the things we do. If they become unpinned from pulling it like that, they were shit from the getgo.
False, especially for that kind of connector
@@thomasjohnson360is there not a lock between the metal pins and the cables like in most VAG cars?
@@chrisparussin5359 yes there is. If there weren’t, the wires would push right out of the backside of the connector when you plug it in.
Jeep owners would never figure this out, thanks for the guide.
Lmao having a 95 yj makes this look like a whole lotta extra work😭
Nah tbh he just got a brand new Jeep my parents have. 2017 it’s 2024 now 💀💀good luck taking those doors off seized like a mf
Jeep tip for every one in the comments every other year change ur sleeves in the hinges so they don’t rust out 😂💀😂
Where to keep the last bolt?
Curious. Are you sure that's a Jeep ? Looks like a Dewalt to me.
Thanks 👍
You gonna film it when you strip the head of the fastener with your “makita”?
Cross-threading is just poor man’s loctite 🤠
@@aaronjones356 need a functioning faster head to have a chance at cross threading.
Just got my Jeep and this video helped ! Keep up the great work
Wow, i never thought about the modern amenities of jeep doors. I had two sets of doors for my YJ; half and full frame 😂
With my YJ I just opened the door and pulled up lol. Also with my YJ I would just toss the doors on the side of the house. All I had was soft half doors anyway
I'm so glad you're doing youtube videos again
Take the instructions throw them away got me dying 😂😂
It’s not removing that doors that’s hard, it’s putting them back on.
Just throw all the bolts away. I never put them back. Makes it easier to take off every time.
Now that doesn’t seem very safe
Great video!
Very useful video. Tahnks a lot. I will use it on Honda Activa
He skipped step 9 "Tuck the wire harness into the mesh pocket of the door" to reduce the possibility of damage to the wires!
I don’t even have a jeep, but that was great. Thank you.
Got it, thanks
Now to need to but a Jeep Wrangler
Step 1. NEVER OWN A JEEP
😂 my thoughts exactly
4runner
@@rickharrison6969 - Tundra 🤙
That’s true. I owned my brand new Jeep for just short of 1 year before I had to offload it. It was a terrible car.
Tacoma🛻🛻
Step 1: sell the jeep.
Step 2 : Buy any other brand raised pasanger vehicle.
Jeeps are so cool just because of this and this alone 😂
Great instructions!
Wow, a jeep with power windows. Hinge pin extenders are a big help. Also installing door hangers in my garage really help when putting them back on; now that I'm old, lifting them from the floor is not so easy.
The outer door henges on my jeep stay off permanently for easier removal. 3 years later and no issues.
Thank you kermit for helping me remove doors on my jeep 😂
5. "pull down on the connector" Proceeds to pull on wires. that won't cause a problem with repeated use
I don't have Jeep :( but still I'm watching this! 😂
I have a 2004 Jeep lj, all I have to do is undo the strap and lift up lol, it’s almost too easy
My dude got that yellow makita👌
Thanks pal!!😄
I remember when top n doors were sold as a option $$ on the cjs
Pro tip, when your car becomes high mileage, yes it’s interior but still. Those bulk head connectors and the sliding mechanisms get seized and crusty, when you move the bar to unlock the connector you need to make sure the connector is actually sliding open or you’ll break the connector, I’ve done it twice over time with pcm connectors, luckily the 2.4 replacements came with harnesses and I had kept the pcm connectors so I could swap over the sliding bar and connector housing that broke, you will not have that same opportunity at home!!
That's pretty cool ngl
Use the drill is a great idea.....scratching the paint is always a wonderful thing
This why i like my 94. You must open it and lift and its off.
Love the yellow makita 😂
so nice that they made it so easy for a romanian to take it
I have a 2023 JL Rubicon Wrangler. Looking to upgrade my lights to an LED type. What’s a good brand to buy? Extreme Terrain has many different options. Please and thank you.
So what do you do about the mirrors to maintain FMVSS compliance?
Your voice is trying to become Kermit de frog… almost there!… great content. Thanks!
Honestly new bronco doors are easier to remove Frameless windows two bolts and the harness pulls out without breaking harness clips and no extra panel to pull off on the footwell too
Loved it
If you want to avoid possible electrical issues or damaging the connector, don't pull by the wires.
Jeep Hack, use Silicone based clear grease on the hinge pins for the door. Those rubber inserts get hunge up after a while
Why does he sound like lightning McQueen but with a country voice?
More like Owen Wilson doing a Kermit impression
Step 9 : find yourself a group of lions 😂😂
That's the DeWalt-iest looking Makita I've ever seen!
When the tj only had the screws for the hinges and a little loop to take off before you could just pull the entire door off. Now you need to pull out electrical connections and door stops just to be left with the hinges and a loop.
If i was on the engineering team, would have added threads to the bolt storage. If the screw in, you'll never lose them.
nasip olur mu be reyis
Did he say Makita?
why do you need to replace or take off the doors ? for what purpose?
Remove the doors and then get pulled over and cited for no mirrors
They make doorless mirrors
So actually not that few "easy" steps to actually do it?
What other additional equipment is required before you are really ready to go? (besides a place to stash those doors and roof panels)
and for good reason, that's dangerous as fuck. get some mirrors that you can stick on the car if you're gonna do this
No morris is legal if u have a cam
@@tvtothepointYou can sell your jeep and buy a Bronco for example. Which also gives you the chance to store the doors within the car itself
You better have a tutorial showing how to put it back on. Cause, I dont know why I did, I just removed the damn door
Yeah i just start at step 8 on my yj
I love the fact that I learned how to take the doors off right now but the one tidbit I want to add is use a good oil in the threads and put some grease on the pins because it’s not hard to cross thread those bolts to constantly apply a good penetrating oil to the threads in Greece on the pins to keep from corrosion
And now your paint will be chipped on the bolts and hinges and will be rusting in a year! 🤗
What's that yellow thing u use for the screws?
The jeep isnt interesting to me but what is, is that connector that they chose, it must survive thousands of disconnects and reconnects while maintaining integrity of the connection, i wonder what brand of connector it is and how many cycles it was tested on
They don't test, they just throw it in and charge you big time when it wears out. That's their business model
Literally takes minutes on my Rubicon👍
I dont have a Makita only Dewalt, will it work?
the hell. mine didnt come with a tool. or maybe it does and i just havent seen it....😂😢
what do you do when the jeep is 8" higher than when it came out of the factory and you cant get your arm over the door?
Rhats cool tjere is a designated spot for the hardware
Mine have 2 steps
open the door half way
pick up door.
I left as soon as he called the dewalt a makita
Thx
I’m gonna do this on my Ford Taurus
That's so awesome soo easy
How you plan on using mirrors
Never disconnect the wires by pulling on them. You will loosen the connection and have electrical issues. Always grab the black connector.
Bro can you give me some coke Pepsi 😂😂😂😂
Who knew Kermit could drive
Never pull on the wires lol
I came here for this. That hurt to watch... 😂
Door bolt first then safety strap otherwise the door can swing and smash the mirror.
Open door…. Line up with something sturdy… put in reverse, step on gas and sheer that door right off… less than 2 minutes and no backache.
Me watching without a jeep
@brandonhaneline There is a ❤ on the road near the front gate check please!!
Bubba forgot a important step, dont roll the jeep without safety belts, and how to stay dry with out doors in a monsoon..😂
I have a 2013. Step 7 is new. What is that?
“Us Jeepers”
Hahahahahahahahahahahahhahahahahahahaha
I never knew there was a "secret way" to pull the doors off a jeep. I always though there was the right way and the "I don't ever want doors again way"
I just open the the door and lift up 😊 74 cj5 life
why is kermit teaching me this
Is it the same for a 64 Rambler?
Alternate title: “How to steal doors from a Jeep.”
Can definitely tell this guys a jeep guy
Thats nice but the problem is that I don't have one 😅
Heart on the concrete
How to put it back on?
How about the outside mirror?
Now it's cool the new Jeeps still have removable doors.... But my 1986 CJ7 is a hell of a lot easier lol. Open door. Lift up while givin a little giggle. Doors are off. Repeat in reverse to Reinstall. Also, I can SAFELY hose out my entire interior and sun dry after. As much as I like ALL Jeeps, the old stuff is better. Unfortunately I live in CA and can no longer smog it and been saving up to modify some stuff to get it to pass.
Do I have to giggle even if it's not funny?
I feel that....jeeps great but I'll stick to my XJs
jeepers creepers
door finders
door keepers