Basic Rules for Lapping length in Beam - Lap length in RCC Beam || By CivilGuruji

#civilguruji #civilengineers #Beam #Lapping
Basic Rules for Lapping length in Beam - Lap length in RCC Beam
Enroll and get started :- tinyurl.com/COPsLifetime1
Get 75% Discount Use Coupon Code :- GURUJI
For Training Call Now : 9111001234
ABOUT THIS VIDEO :-
In this video Er. Akash Bohare & Corporate Trainer of Civil Guruji (Civil Engineers Training Institute) is Explaining About Basic Rules for Lapping length in Beam - Lap length in RCC Beam
The perfect zone for lapping is where the moments remain zero for continuous beams or in the bending moment diagram, where the values surpass the x-axis or remain at L/4 for simply supported beams. The lapping should be provided on tension zone as moments will be created with greater tension.
Lap Length | Lap length of Beams | Lap Length of Slabs | Lap Length of Columns | Lapping Zone of Beams and Columns. Lap length can be defined as the length that is provided so as to allow the overlapping of two reinforcement bars thereby ensuring safe and efficient transfer of load from one bar to another.
When we provide lapping in a column, all the rebars should be lapped in zone-B as shown in the drawing. The top and bottom portion of the column, i.e. zone-A ( L/4 length ) should be avoided as there will be a maximum moment in this zone due to lateral forces acting on the column.
This amount of overlap between two bars is called “lap length”. Lapping is usually done where minimum bending stress is encountered. In general, lap length is 50d which means 50 times the bar diameter, if both bars are of same diameter.

[@drsteviejasengnsangma8739]

By far the best video on Beam lapping that too with practical demonstration.
Hats off to you sirji

[@Civil_Guruji]

Thank you
Dr Stevie Jaseng N Sangma
Hame bohat khusi hai ki aapko hamari mehnat pasand aai , Civilguruji isi tarah civil engineers ko aage badane ke liye mehnat karte rahega aur aap bhi knowledge dusro ko share karte rahe.
KEEP LEARING, KEEP SHARING.

[@asmakhalid4562]

Thank you for this very informative video!

[@anujadoun2922]

Thank you sir for giving such a good information

[@bdjuyal3205]

yes....acchi jaankaari,....God bless you 🙏

[@nadeemalam5387]

Yes sir... Your videos are really helpful for me, i am learning so many things from your channel sir... Thanku👍👍

[@avaykumar1686]

excellent

[@chamanminjchaman4175]

Yash

[@sanjayborge2240]

Sir, showing neutral axis is the best way of learning, keep it up.regards.

[@subhashmhatre3688]

Yes

[@mdmohtashim7740]

Yes

[@iamskhan101]

Yes sir

[@SurajKumar-oc3he]

Sir bahot achha laga aap ka lapping zone video dekh kar ke

[@ziauddin7948]

Yep # excellent beam bar lapping at bottom & top of beam main bar #👍👍❤️

[@erkundanyadav]

Very important video for all civil engineers

[@Civil_Guruji]

Thank you

[@jpdesai348]

Pl. Make a video on size of column and beam regarding span lengths

[@pallavikhandale8537]

Yes, we need more videos 👍

[@shashiranjan8765]

hi

[@ManojKumar-gt4ct]

Thank s for good suggestion
Sir could you make one video for continuous slab reinforcement detail, how to place and tie the age of reinforcement where there is no beam provide at any side exemption of column. Means wall beneath of the slab
What detail. Pls .must one video for full detail.
Very good evening and thank u so much .
Sir when ever you will make these types of video upon my request pls dedicate my name we will be very happy . I will wait for your video .

[@Civil_Guruji]

Manoj surely I will make this video very very soon... Keep learning keep sharing

[@sultansyed4316]

Very nice video on beam 😊

[@angshumandebnath1035]

Very knowledgeable video sir
Yes

[@MARUTII]

sir IS codes kon kon se read karna cahiye for building construction batayega 🙏🏻
bahut informative video tha ye 👌🏻

[@Civil_Guruji]

Maruti bilkul iske upar bhi mai video bana dunga aap follow karte rahiye channel... Aur share bhi kariye apne friends se

[@prabhupadasahoo7483]

Clear Span or Effective span divided by 4.what is correct

[@nkbcivil.maldives9170]

Clear span friend

[@noselangami1605]

Thanks you so much, yes, yes, yes.

[@CivilVisionINFRA09]

Definitely
yes....... Sir

[@sujitbiswas7198]

Great discuss guruji

[@pemayuden7316]

I would like to avail the 3 months online training. I’m from Bhutan

[@Civil_Guruji]

Pema please call on 9111001234 for more details

[@sannivarma147]

Yes jankari my friend 😮

[@Civil_Guruji]

Thank you for your comment!
We appreciate your support. We strive to provide the best Knowledge for civil engineers,

[@KiKi-pn7is]

👍👍👍👍👍👍👍👍

[@badrealam1340]

Good description.

[@mohdarbaz8357]

sir Lucknow me training centre aapka kaha hai

[@Ali_saif_98]

juggaur railway station k pas.Goel tower....b.b.d se thoda aage

[@Civil_Guruji]

Arbaz aap 9111001234 par call kar lijiye apko saare jaankari mil jayegi....

[@kaliatarai1886]

@@Ali_saif_98 vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvf

[@naughtysagar6353]

sir yeh video dekhne ke baad aapka channel subscribe kar liya
kya gajab expletion hai.
very nice sir.
👍👍👍👍👍👍👍👍👍👍👍👍

[@gopalsharma3966]

Sir for bottom main reinforcement Lapp:-
from center of the beam we will avoid 50% length of the L/4 then after we will provide Lapp.
Suppose clear span 6mtr, L/4 =1.5mtr and beam depth 300mm,bottom cover 30mm, bottom main bar 16mm,
so effective depth will be 262mm.
2d= 524(2*262mm)
So, we will avoid from the inner face of the column 524mm and also avoid from the center of the beam 50%of the L/4.
So lapping area will be in beam.
We are taking length From inner face to center of beam=3meter.
I)Avoid 524mm from inner face of the column,
2)Avoid 50% length of the Second
L/4 =750mm
So= lapping zone area = 1.726meter(3Meter half span-524mm-750mm)
I think you will all understand 🙏

[@sravankumar75]

Thank you ao much.. I had some doubts even after watching this video. But your wonderful example made my all questions clear..

[@rameshangala3565]

L/3 of total span 6mtr of beam

[@hussainishaq5747]

Yes sir .. really helpful

[@bishnusahu2779]

Thank you sir I love civil guruji

[@Civil_Guruji]

Thank you so much for your good wishes. I greatly appreciate your love and support.
Keep Learning, Keep Sharing.

[@parthasarathidas7420]

yes sir ..next part plzzzz

[@er.amitmaitraakm4158]

Very useful video .

[@sondarvasudhir8736]

thank you sir for usefull information

[@vinaysanglikar9096]

excellant sir

[@zeetupatel2906]

yes... I want to know more on this topic...

[@adilhuq4438]

very well explained

[@MuhammadShahid-th6be]

Very informative video

[@ksshitiz22]

Very clear video

[@Civil_Guruji]

Glad you think so! @ksshitiz22

[@birendrarokaya2193]

Yes we need more video

[@mohdzahed6698]

Thank you so much sir

[@mohdtahseem2662]

Deep information provided by you..Good job👍

[@Civil_Guruji]

Thank you for acknowledging our efforts, Civil Guruji will continue providing content for Civil Engineers. Stay curious, stay supportive, and keep learning.

[@mdreza2060]

thank you sir👌👌👌👌👌👌👌👌👌👌

[@sukashbehera6351]

Definitely.... YES sir!

[@radheshyamyadav411]

Tq sir

[@ErKumar_S-tr8st]

Yes... IS code ke anusar lap zone in beam & column bataye

[@rookhxhassaanch8951]

Sir
How calculation in tension sport steel length?
To ward the beam centre

[@prasannapradhan3371]

Good sir technical knowledge

[@samdecent4362]

Yes in Detail

[@PuranderReddy]

Good explanation

[@Civil_Guruji]

Thank you, Purander! I'm glad you found the explanation helpful. 😊 If you have any more questions or need further clarification, feel free to ask!

[@rahamanmansuri7860]

Good job Sir

[@VikramSingh-el4fj]

very nice sir ji...

[@Civil_Guruji]

Thank you for acknowledging our efforts, Civil Guruji will continue providing content for Civil Engineers. Stay curious, stay supportive, and keep learning.

[@mmunir8601]

Yes your video is nice

[@vijayaladi9629]

Can we do lapping of bottom bar at column junction

[@BalveerSingh-fr8rf]

Very good 👍 sir

[@Civil_Guruji]

Thank you! Accha laga sun ke ki aapko video pasand aayi.

[@apangaventh]

Sir for g plus 3beam what should be the beam crank bar will it be ok if I use single 12mm bar my beam diameter is 7*14

[@jigendra]

Thanks sir

[@nilanjansamanta8629]

yes

[@SobikulIslam-ye7zm]

Mera hisab se milahe good

[@Civil_Guruji]

Thank you for acknowledging our efforts, Civil Guruji will continue providing content for Civil Engineers. Stay curious, stay supportive, and keep learning.

[@mdaquibhussain3496]

Yes we want full bar bending video

[@irfangul4345]

ZABARDAST G♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️

[@Civil_Guruji]

Thank you
Irfan Gul
Hame bohat khusi hai ki aapko hamari mehnat pasand aai , Civilguruji isi tarah civil engineers ko aage badane ke liye mehnat karte rahega aur aap bhi knowledge dusro ko share karte rahe.
KEEP LEARING, KEEP SHARING.

[@AmalPatra-xj5en]

Yes......thanks...

[@Civil_Guruji]

You're welcome!

[@samratchatterjee8290]

Yes sir your video is helpful to me .

[@Civil_Guruji]

Thank you
Samrat Chatterjee
Hame bohat khusi hai ki aapko hamari mehnat pasand aai , Civilguruji isi tarah civil engineers ko aage badane ke liye mehnat karte rahega aur aap bhi knowledge dusro ko share karte rahe.
KEEP LEARING, KEEP SHARING.

[@pradiptakumarsahoo1134]

Jay jagannath

[@Civil_Guruji]

Jai Jangannath

[@sanjibbiswas1828]

Yes please estimate analysis

[@jitbahadurshrees1011]

Yes your video àre very helpful

[@Civil_Guruji]

Glad you think so!

[@VOICE_OF..NATURE]

Thanks you sir

[@sagarkamble7844]

Sir please showing circular column formula in Excel measurements sheet

[@kaminibaikaminibai4229]

Very good👍👍👍👍👍🌞🌞🌞🌞🌞 day God bless you🌹🌹🌹🌹🌹🌹🌹

[@pratanuchakroborty.1747]

Sir can u make a video in overhanging beam lapping...?? Plzz sir

[@rasodintamboli9800]

Yes sar

[@CivilConstructionWorld]

good video brother

[@a.k.creativedesign951]

Yes

[@dipankardaskalicharanmahar7429]

Sir kon sa aggregates accha hota hai river sone Or lime stone

[@manojmotivation1257]

Thank you sir..or dusre beam ke videos for continuing beam is code ka bhi video banana

[@suhailanjumabdurraheemsayy7639]

Sir, is one side of beam is inside the column and other side of the beam is outside the column. Is this an issue in column-beam joints?

[@sharanabasavabandegolmath6848]

Usefull
Yes

[@Civil_Guruji]

Glad you think so!

[@ramgopalsoni7306]

Nice, yes

[@anishyadav7231]

Great sir

[@DharmendraKumar-se3kk]

Nice video sir

[@awadheshrai5609]

Kya kolam me lep dena mazbbooti ke liye achha hai.

[@kamalkapadiya3904]

👌

[@shatrughanchaudhari5973]

Yes sir.

[@SohailShaikh0313]

Yes of course

[@RajKumar-vw6vi]

Yes
Thanks

[@hrishabhdevpandey3775]

Yas for next Vedio

[@chennareddyindla2349]

Good.

[@user-mk6kz6zw6e]

अति उत्तम कार्य

[@Civil_Guruji]

Thank you
विक्रम कुमार
Hame bohat khusi hai ki aapko hamari mehnat pasand aai , Civilguruji isi tarah civil engineers ko aage badane ke liye mehnat karte rahega aur aap bhi knowledge dusro ko share karte rahe.
KEEP LEARNING, AND KEEP SHARING.

[@brajakishormallikbraja6599]

Yes sir😊

[@bhavnadhas8882]

👍👍👍

[@alamm5432]

Yes, sir!

[@kevinrajput2238]

Interview questions pr series banaye

[@engrhajibahadar9475]

Great

[@shadabalamalamkhan3534]

Yes Sir

[@ajaydhamtan2926]

❤️❤️

[@Islamiwaqeiat]

Nice sir

[@Civil_Guruji]

Thank you so much @Islamiwaqeiat! Glad you liked it. 😊

[@sujitbaruah4536]

Very helpful video.

[@Civil_Guruji]

Thank you
Sujit Baruah
Hame bohat khusi hai ki aapko hamari mehnat pasand aai , Civilguruji isi tarah civil engineers ko aage badane ke liye mehnat karte rahega aur aap bhi knowledge dusro ko share karte rahe.
KEEP LEARING, KEEP SHARING.

[@axatrathod]

Yess!

[@MuhammadSajjad-he9vj]

Aoa sir am from Pakistan I learned practical in barbanding and building structures

[@prateeknishu121]

Yesh sir

[@rajeevlochan6145]

Good 👍

[@akashdavane5612]

How to Design of steel in slab column and beam

[@princemmd4924]

MashAllah Sir g