Many thanks for this timely video. I have this bike and was just having the issue with the brake lever touching the handle. So I adjusted per the video. I had to rotate the adjustment many times to get the lever away from the bar. Wondering if it's possible to adjust that too much where it might come apart during riding?
Glad it helped, the barrel adjuster can be backed all the way out of the threads. So please inspect it carefully after adjustment. Also bear in mind that there is also typically a barrel adjuster on each of the front and rear calipers as well that can give you additional adjustment. If you get to the point that both barrel adjusters have been backed out, then you would have to readjust the cable. I show the process in this video. I hope this helps! czcams.com/video/iHc-N9AjuDQ/video.html
@patdurkin5642 I thought the trip reset by turning the bike off and on again. Are you sure you’re looking at the trip and not the odometer? To cycle thru them turn the bike on and press the “m” button to cycle thru. Beyond that, I am not certain. I know to access the settings you can follow these instructions from the manual. 1. Press the UP and DOWN keys at the same time for 2S to enter the setting interface and then press the M key to switch. 2. Press the UP and DOWN keys to select the parameter. 3. Press the UP and DOWN keys at the same time to exit. But I am not certain which setting would reset it. This is a good question to send to KBO support.
@Larry Byers I did a video for another brand. I would mention that I messed up in this video, and every click of the right knob increase or decreases the shocks. czcams.com/video/fYlWql2kLQA/video.html
great video. followed your directions and now the bike shifts perfectly. Thank you.
You're welcome!
Like you're videos. Thank you wating on delivery can't wait.
Thanks for watching!
Wonderful video! Super helpful! Watched and rewatched it multiple times.
Glad it was helpful! Your welcome!
A great video, thank you.
Glad you enjoyed it!
Great video. Especially the brake adjustment.
Glad you liked it
Great information. Thank you so much for taking the time to do this video!
Glad it was helpful!
Many thanks for this timely video. I have this bike and was just having the issue with the brake lever touching the handle. So I adjusted per the video. I had to rotate the adjustment many times to get the lever away from the bar. Wondering if it's possible to adjust that too much where it might come apart during riding?
Glad it helped, the barrel adjuster can be backed all the way out of the threads. So please inspect it carefully after adjustment. Also bear in mind that there is also typically a barrel adjuster on each of the front and rear calipers as well that can give you additional adjustment.
If you get to the point that both barrel adjusters have been backed out, then you would have to readjust the cable. I show the process in this video. I hope this helps!
czcams.com/video/iHc-N9AjuDQ/video.html
@@TinkeringTurtle high turtle! I just purchased this bike 2 months ago I was wondering if you know how to reset the trip odometer.
@patdurkin5642 I thought the trip reset by turning the bike off and on again. Are you sure you’re looking at the trip and not the odometer?
To cycle thru them turn the bike on and press the “m” button to cycle thru.
Beyond that, I am not certain. I know to access the settings you can follow these instructions from the manual.
1. Press the UP and DOWN keys at the same time for 2S to enter the setting interface and then press the M key to switch.
2. Press the UP and DOWN keys to select the parameter.
3. Press the UP and DOWN keys at the same time to exit.
But I am not certain which setting would reset it.
This is a good question to send to KBO support.
Thanks for the reply.I'll try support to see if they can help with this issue 👍
Have you shown how to adjust the front suspension system?
Sorry, I haven’t done a video on the breeze for that yet.
@@TinkeringTurtle any Idea where I might find infor on that?
@Larry Byers I did a video for another brand. I would mention that I messed up in this video, and every click of the right knob increase or decreases the shocks.
czcams.com/video/fYlWql2kLQA/video.html