K20/K24 RSX VS 370Z Nismo
Vložit
- čas přidán 19. 05. 2016
- I'm a certified professional ricer, just wanted to let you know before watching. Filmed in Mexico and Speedo is way off because of my transmission, special effects computer generated in use.
Mods: K20 Civic Si Head K24 Block Motor: 260hp- H beam rods, acl race bearings, rebuilt motor. RBC intake manifold, Custom CAI. RBC intake port matched to the 70MM TB. K20 50 degree VTC gear. Tuned to 7900 rpm.
Vtec kicks in at about 3700 RPM, K20 oil pump.
KPRO V3, Honda LSD 4.7 FD 6 Speed
410cc RDX injectors
Exhaust: Skunk 2 Alpha header, Kteller 3" piping, vibrant ultra resonator to vibrant muffler.
Stage 5 XTD Clutch, Lightweight flywheel
It has type R lower control arms, torque motor mounts, energy suspension bushings, Megan adjustable coilovers. & power steering delete. Speedo off by 8mph (because of the Si trans)
Tires: Crappy chinese tires with good tread, lol.
The Action Cameras I use:
YI 4K
www.amazon.com/gp/product/B01...
Gopro Hero 4 Silver: www.amazon.com/GoPro-HERO-4-R...
SJ4000 (Cheapest)
www.amazon.com/SJCAM-Original...
The Action Cameras I use:
YI 4K
www.amazon.com/gp/product/B01...
Gopro Hero 4 Silver: www.amazon.com/GoPro-HERO-4-R...
SJ4000 (Cheapest)
www.amazon.com/SJCAM-Original... - Auta a dopravní prostředky
That a boy..making the dc5 community proud..
Puts full build list in description
You da real MVP
How much did u spend?
I have a 370z.. I gotta say that's a fast ass RSX .. That vtec tho 👍🏼👍🏼
Gracias senor!
MishoMods my cousin has the 02-04 version and it has at least $4000 worth of mods on it and I have to say that his car has so much grip it's scary and he wasn't even stepping on it hard because his clutch was slipping
in description!
Props to you for not being a cry baby full of excuses.
That RSX got balls. Good run bro
Two star cars. I miss my RSX. And I'd like to own a Z later on.
you should be proud of your build. .great runs!!
it's amazing how you walked him. 370z are no joke.
electric feel rsx s are no joke
LlLnig yeah they are lmao, this one is respectable though.
Syn0203 they are Joke lol 😂 is a 3.5 vs 2.4 lol
RSX-S is 2.0, no? i drove a 2003 and 2006
Manuel Calderon all that to keep up with a stock 370 lmao, NA K's aren't impressive in these chassis's unless you make it not practical to drive at all. Or nitrous.
Hey man is there any way I can contact you on stuff I need. I'm missing a few parts and not sure what to use.
Why is your speedo off?? I mean I know the Si have high frequency out put and the Rsx has low frequency out put but the Hondata doesn't adjust it??
lmao at the description. you drive that car like a beast dude. nice job!
vtec at 3700? how is it daily driving on the street/highway? gas consumption?
2:11 damn that passing truck hauling that trailer tho
Ricer flyby
What kind of k24 is it? The k24z7 like the 9th gen civic? Or the acura one?
Were you able to run the k20 header on this setup?
Are you doing this with a k24?
Crazy to think it's fast enough to keep up.
How long did that xtd clutch last?
finally nice to see someone actuallhy know how to throw gears congrats man what a race sometimes it also comes down to the driver
Are you around the dfw? If so who did your swap and tune. TIA
May I ask what you paid for your car and what you have in the engine?
where’d you get the mirror
Hey bro how much money did u put into ur DC5 to make it that fast?
Cant wait to do a K24 block! Have full boltons and K20/A2 head/cam swap with Hondata on my 5 speed base and im making 210whp
fuck yea ! VTEC! love the engine setup so far man props
Bro what are your Mods
I'm saving up for an RSX With this new Job I got
Check out the description in my other video K24a2 RSX pulls
mods compita ?
What all have you done to it? For sure not stock lol
Out of what civic SI is the head ?
And out of what car is the k24 block I want to build the same exact set up for my EP3 thanks
Steevn _ k20z3 and probably a k24a2
How much hp is this rsx putting down?
stock head? stock piston?
Hey man I have a question about your build I was hoping you can answer for me:
Was it difficult to fit the alpha header on your k20/k24 frank build? Any issues with it not clearing the front sway or the header hitting the firewall or anything like that since the k24 block is taller?
I ran no front sway and solid poly mounts help with header install
@@DistrictDRIVE oh you're not running a front sway I see. Thanks.
What build do you have on it bro
1:32 is the guy in the truck flipping you off?? XD
Wow bro beautiful built ! Great for the Honda Community nothing but mad probs on the K series
Nothing beats the k20 crossover, or overall sound of the motor at that matter
wat motor and volt-ons??
How much was this build if you dont mind me asking?
hey did you have to buy type r axles for those type r lower control arms? I've been told they'e 5 ml longer on each side.
Paul Tymikiw I used the king motorsports adapters to use Type S axles
Oh neat didn't even know that was an option!
how long would this setup last? I'm doing a similar build but I'm concerned about reliability
It’s Honda & still NA so no need to worry about reliability just as long as you do everything right
Damn that rsx has some balls. I love Honda! This is a perfect example of why I wouldn't mind getting rid of my Z for a DC2 or DC5
N55 CoupeLyfe lol 350 for sure but no way a 370
If you’re gonna get a DC2 do it while you still can lol they’re jumping in price. Base models are starting to got for 10k in some places
@@BenM Integra worth way less and is way cheaper to make power
@@romeanaya7637 damn bro that’s close gsr prices where I’m at. Where you from that LS integra go for 10k??
@@BenM I would assume he has a DE 350z. Why would anyone get rid of their HR Z for a DC2 or DC5? lol That's just silly.
K24 with k20 head?
Damn bro that RSX hauls, good runs
What year is this rsx???
Wish I had a k24 in my teggy
Are u running cams??
what mods???
Love the description haha
I got a k24z7 and a want to make a head swap . I was wondering that if the k20z3 can make more power than the k20z1 or k20a2?
Keko402 No I don't think you should find any noticeable differerence, and K20Z1 head is the same as K20a2, just has slightly more aggressive cams, but I'd use TSX cams or drag cartel 3.2+
MishoMods very helpful i will get mine soon!
hey wat u need to do to the oil pump to put it in k20/k24
AyoooMemo Escobar you need to take some material away, I believe there is a tutorial on CZcams
This video motivates me even more to finish my dc5
Where did u get the k24 from and how did u wire it up? Im prob gonna do a b20vtec swap on my dc4 but i wanted to know how different a k24 is
K24a2 from 08 TSX , Not sure about the harness but KPRO is definitely recommended
B20 is very nice and puts down some serious torque. I had an lsvtec setup in my eg sedan. My personal opinion is that K series are just a little bit better as far top end goes. I now have a fa5 and really enjoying then k motor...
+deadkat5 agreed. It's definitely the updated model. However, building a b series setup has never been cheaper lol
+deadkat5 the b20 engine out of the crv is good... The k24 out of the crv, not so much. Better off with the tsx k24
Damm nice race ! What are you mods 🤔
This just gave me hope wit my cl9 build lol
make more vids bro I'm waiting to finish my K24 rsx can't wait and is you tuned on pump?
AlmightyMills57 Yeah it was almost completely stock k24 tuned on 93
Good kill!! Your dc5 will hold its own, hard to see them like this
Do you know anything about the Kraftwerks S/C kit? I already have fuel pump, Type S oil pump and injectors etc. i want 280-320 whp
Aaron P you’ll need an after cooler, fuel return system, and a good clutch you came make upward 340+ with a kw kit
Ive got a CM stg3. Have an engine oil cooler coming. Have the full fuel system and Hondata.
What about exhaust? You’ll need a high flow header i recommend skunk2 alpha. Also would recommend getting a short shift kit.
Plm race header 😁 Hks hi power exhaust. K tunes TB, RBC IM
that lil Acura eating good isee
What's done to your car? I have rsx-s too with headers, exhaust, and injen cold air intake. Sick car dude
Edit: Would you recommend getting the kpro itself or sending the stock one in and getting it chipped?
Thanks :) KPro uses stock ECU so I would send mine in instead of buying another stock ECU from them and having them chip it. Mods are in description now.
Does anyone have an idea of what this type of build would cost? If you can do it for less than a cheap turbo kit I'd say this would be the way to go!
5500
If you got the rsx type s just buy a k24a long block and use ur head off the rsx
With ofcourse a few changes
hey bro i buy one engine k24a2 and says rbb-2 is 06 year? the seller dont say the exact year
Vicente Qiu There should be a sticker on the engine that has the vin number from the car it came from, you should be able to look up the vin and find out what year it is as well as other details about the original car.
MishoMods ok the engime come in 2 weeks
MishoMods your engine says rbb-2?
Vicente Qiu Go to this video czcams.com/video/G9Che34y2D0/video.html and at 1:45 you can see my new K24 motor's vin and serial number, etc. Yours could be different and still be an 06+ but you can use that as an example to get closer to finding the answer.
Which k24 are u using a2 or z7?
k24a2
it's a good as rsx but I hate how you kept looking to your left lol it got me kinda dizzy
good shit bro . why did you get rid of the whole k20a2 that was in the car
It had a K20 civic si head actually
What rear view mirror is that ?
The LowGentleman Broadview convex widest one
what mods are done to the acura?!
Description has been updated
sketchy driving cause no traffic is da wei but thanks for the description helps make expectations for future builds
Dat 5th gear pull was beautiful
That VTec Kicked in Yo nice daily
Don't you just love that lol. @0:32
Good shit bro
is the an type s rsx ?
Luis Rodriguez doesn't matter if is a Type S since the engine is a Frankenstein
Nice ride. Sounds beautiful.
What pistons were you using?
Wigberto Colon stock TSX
Im really curious how many whp are you putting out?
I have an 03 type s k20z3/k24a4 Swap.
Adrian Hernandez Only 220 whp at 7500 rpm but the car never really ran at its best, had a lot of issues with it. Needs to be done right and have all grounds covered, also don't put your intake too low to the ground, lesson learned haha
Those are great numbers man. Yea making mistakes is what makes us smarter lol, im at 213whp currently anyways great kill man, those 370z are pretty fast
Adrian Hernandez Haha thanks dude, good luck with your build
Thanks man same to you 👍
@@DistrictDRIVE What'd you do wrong? I'm building a k24/20 with pretty much the same specs as yours
Beautiful car. I love the red seats.
Good shit dude love ur car
That is awesome bro! Kill starts with a K! Up the series
as soon as your finally get enough stretch to do a good run that VW just HAD to get over..
last half of the powerband was saving your ass on that 2:30 pull. even though you stepped on it late you came the fuck backkkkkk!
How’s the xtd stage 5 clutch?
awful, lmao
1:40 you made room for him. That's good driving bro. It's all fun and games until someone gets hurt. I think you know that. Smart and mature of you to move for him bro
re4pro26 Thank you haha I try my best
nice work man and she sounds good
What header did you use? K24 or k20?
tristian lee they don't sell one specific for k24 or k20
that rsx pulls nice bro
Do you have a list of all your mods on your engine, it seems pretty healthy!
Yeah it's in the description of my other video, motor was always having issues even though it seemed to run healthy in this video, it wasn't assembled properly and ended up throwing a rod, the car will be coming back 10x stronger and faster soon though, stay tuned. Here's the video link: czcams.com/video/baUxc4h0MHo/video.html
MishoMods thanks for the link!
no problemo :)
Wow . Rsx came through. Miss my 02 type s.. I was beating g35s with just cold air intake amd DC race headers.. k20 is Beast.
Hey bro! Can we talk? I’m trying to do the same swap.. I’m very lost .. can you help me by answering questions
SERG PENA Google and the forums are your friend, lol
how much hp does that rsx to beat a nismo?
Emmanuel Cahigas Only 260 crank
nice car dude. sounds nice and strong.
you have any headwork done?
Yeah it’s an Endyn ported CNC head
MishoMods stock valvetrain?
Nice build! I picked up a G37s but have a TSX as my daily and I love it but mine has 300k+ miles so no point throwing lots of parts at is.. There's a guy here with a turbo TSX pushing 500 some hp (we live in Denver so a k20/k24 swap isn't as effective here as FI).
I'd love to go turbo but I need to save up for awhile. I wanted to get a g35 or g37 but never found a clean one for a good price, I'll see how long I stick with this car, lol
I have a lightly modded rsx-s. How much is a kpro or hondata??
about $800-1000
+Misho5z for 25hp?? not worth it
Worth it if you're serious about modding
+Misho5z timing belt slipped today, am I screwed?
Unless it snapped I don't think so
what's all done to the rsx??
+Jose Hernandez K420 blaze it swapped
I can’t really tell in most races who got it , to much traffic . Did y’all even pass 100?
130
Stage 5, shit must be heavy as hell
nice...that extra torque helps a lot. if it was stock k20 it would have lost
Yeah for sure it helps when pulling on the highway
Nice man, I ran a franken K EP3 the other night. Had no idea they were this fast even without boost, you can check my channel for that run.
Check this guy out making honda guys all over the world smile 😊😊
What mods on rsx?
Description updated
damn 260hp and pulling on a 370 thats crazy.
Jav z34 rsx type s weigh like 2600 pounds and a nismo 370z around 3300 pounds, rsx ya makes 260 hp ( nobody said whp )but not anywhere near the torque numbers the nismo is getting... Nismo got walked
torque is for low down lazy comfort power, horsepower is what wins races
Vas Ba *2800
Nick Givens he didn’t even pull one bit
@@kazeoner183 you're ether blind or in denial
Hell yeah im doing a similar build- 10k redline and a target of 300whp at least