The Ultimate DriveShaft 2020
Vložit
- čas přidán 21. 07. 2024
- Join the ACD Community List here: www.acd-unlimited.at/
If you want to learn more about the Darwin Drum Pedal Project, please check out my website: www.acd-unlimited.at/english/...
If you have any questions, feel free to contact me: www.acd-unlimited.at/english/...
Find more details at:
www.acd-unlimited.at/english/
acdunlimited
Instagram @acd_unlimited
0:00 General
1:25 Difference To Former Versions
2:45 Delta Connection & Locking Mechanism
5:11 Other Pedal Connectors
8:45 Special Connector For Axis Pedals
this man is a genius hes the hero we need, the engineer we deserve
Absolutely love his passion and commitment to making the best product possible.
9:40. Exactly my axis pedal problem. This is why axis has a round drive shaft that strips so that you can try and adjust them correctly but it always results in my pedals going out of whack after lots of play. Thank you!
Brilliant engineering!!!
this is GREAT
amazing
Hi Dennis,
I use Pearl Demon drive pedals and considering this shaft as un upgrade. A few questions ... Have you considered a double locking bolt arrangement attaching the shaft to the pedal shafts, as per the Pearl and other pedal shaft design? I feel this gives a tighter clamping force with the added benefit of should one loosen the remaing bolt gives you a clamping force to get you through the gig. Would you consider providing this as an option if requested?
Has the rotating mass increased or decreased with this new shaft design?
ahhhh niceeee
Can you make some iron cobra foot board bottom springs that are a bit bigger?
Being able to swap out driveshafts easily on backline kits would be a selling point. Then one might be able to tour with just the driveshaft instead of a pedal bag.
Noiccce!!!
is it compatible with the Iron Cobra 200?
This is amazing! Will this product work with tama speed cobra double pedals?
Seems very well engineered. I bet it's well worth the cost if you are a pro drummer. A little bit pricy though for the hobbist drummers.
Just wondering how it compares to the Trick P1V6P or the Dixon PPSJ-PC driveshafts.
I have Axis and Pearl eliminators pedals. Does it work for both?
DW - quarter inch square connector... but video shows something very different? Please clarify
It is still the counter fit of the square connectors only shaped in a way to be able to machine it on a CNC
HELLO STEVE! I want modify my
Drive Shafts by, 'drilling then 6mm tapping to add a 2nd. Key Screw at the 1/4 position from the Single one that locks onto both the Master & Slave sides of the Shaft?
I wonder is this drive shaft better than the trick , drive shaft ? Anyone know?
Hi Dennis, werden künftige Pedalen (also bspw. auch meine :P) standardmäßig mit dieser Kardanwelle und den sonstigen Updates ausgestattet sein?
Lieben Gruß
Si! ;-)
@@ACDUnlimited Hervorragend. Du schaffst es echt immer noch einen drauf zu setzen.
Do you ship to the US?
yes