Truss is dead. Get these instead. Colorkey LS6 and LS8 popup totems.
Vložit
- čas přidán 6. 06. 2024
- I can't tell you how much of a game changer these popup totems from Colorkey have been for my lighting setup. I was always a tripod guy until these came into my life. Watch and see how easy they are to put together, and even leave assembled. Popup totems are amazing for lighting or even your speakers.
_____________________________
RESOURCES AND LINKS:
Colorkey and other brands under Mixware.
www.mixware.net/
Bunn Gear Command Center / The best, most portable DJ booth on the planet!
bunngear.com
The DJ’s Vault / Need more help growing your DJ company? THIS is the solution.
www.thedjsvault.com/
Crate Hackers / Check out this online resource to help you get organized and find the bangers faster.
www.cratehackers.com/7daytria...
Both Lighting / My favorite lights.
bothlightingusa.com/joebunn
Check out my DJ gear on my Amazon Storefront!
www.amazon.com/shop/joebunn?r...
Follow us on Instagram:
/ joebunn
/ thedjsvault
/ bunndjco
/ bunngear
__________
#thedjsvault #joebunn #mobiledj #cratehackers #djjoebunn #djlife #weddingdj #giglog #mobiledj #bunndjcompany #djgear #djlife #gearhead #gearreviews #giglog #djgiglog - Zábava
These look exactly like the Rockville stands expect the Rockvilles are cheaper.
🎯I have 2 of them.
They don't just look like them...they are them. Down to the kit that comes with them (see the small extension for mounting on top of the totem?). With the exception of the folding base - I think that's new?
I don't know that Rockville are the manufacturers, but these are definitely the exact same product.
Thanks for giving us a glimpse into your gear arsenal, tips and aspects of the business! Have a great weekend!
totally agree. These types of stands are the way to go. Also these make for really good looking speaker stands!
I been rocking with the Rockville ones for 4 years now lol
me as well
Have both heights
I keep the small one assembled with out the baseplate. So it is about 2 min to finish.
Tip: keep speaker nipple in top plate facing inside. So if I need it. It’s right there for my speakers.
SO much nicer than using trussing!
You can also use a truss bag to carry two of them half assembled. Saves quite a bit of time and protects them. Just stick some foam inside to protect them from one another (as well as from putting excess wear on the welds).
Makes it very easy to carry two of them at once. I do this with my Rockvilles, though I don't use totems often anymore.
I have the color keys. I have two sets (one is now broken). They take a good amount of time to set up. For a while I left one set constructed instead of taking them down each time. This ended up back firing because one stand’s welds broke off the plate. I just use the totems. They are quicker to set up than the color keys IMO.
rockville has the same
Nice video, and I enjoy your equipment videos. My question is, do you prefer these over rockville rtp-go? They look similar to the Rockvilles. Thanks
I have the same question.
The stands are exactly the same!
I have both, the Rockville are better build quality, but considerably heavier. For light duty and portability go colorkey, for build quality and durability go Rockville.
Both look identical to the client and guests.
I've never used or tested Rockville ones.
Rockville has had these for years. Nothing new
sorry but stop misleading DJ's, Truss is in a complete different level (Professional level) this is are just an amateur stuff!
@enmanuelTorres24..
So.. you edited your comment, and it is still difficult to read AND unprofessional. Nice job!
By the way, there is nothing "amatuer" about these. They look amazing when used properly. Just like vertical trusses, popup trusses have their own use.
@@JamookieI know I don’t speak or write English very well, but the thing that I don’t like is the title of the video which is misleading DJ’s believe me this stands are very bad, first this are metal and they rust very easy, second truss will never died because you can find different ways to used it, plus truss is in a different level and also truss is aluminum which will never rust!
I wouldn't say these are amateur. These and trussing are for 2 different purposes and occasions.
@@djaga4404Yeah, but these are so wanky that I wouldn't trust them with an empty can on top.
I would suggest getting a little bag for the parts. I have the LS6, but the bags are terrible . The get ripped easy, parts will fall out the bag.
You should have gotten the Rockville totems. I have had them for a few years and the bags are still good.
I have 2 sets of the Rockvilles, one for events and the other for my home. There bags wear out too but not as easy as the LT6 bags.
My truss unit barely leaves home anymore because it requires at least two people to move and takes up so much space in my vehicle and at the venue. Where I am dedicated space for the DJ always winds up being super tight. I have two sets of totems and they have made a huge difference with my set ups.
My one question, Joe, is do you weigh down the bases for more stability? I park my Chauvet Intimidators on top and gotta be honest they swing a little wild sometimes! Thanks for an epic video, your content is always incredibly helpful. 👍
I'm not getting any sway on these. I don't weigh them down any.
I’ve got Chauvet 375ZX’s… these base plates seem a little narrow. I want NO rocking back and forth when my lights are running. Plus, I need them to be 6 1/2 feet tall.
I had the same exact stand, same exact parts they were from Rockville.
Too heavy and cumbersome, I sold them and bought the Danny Max totems.
I have the Danny Max totems set up in about 2 1/2 minutes
These set up in zero if you leave them assembled like most folks do.
Hey Joe, From the video it looks like there are other settings holes, so do you have to have them fully extended?
Bring trusses and your done😂
That's correct.
If your just putting moving heads I think gravity stand is a better option
Hated those. They looked mad wobbly with a mover on them.
I never assemble at an event , who does that!, Unless you get there 2 hours earlier that you already do.
Not liking these, still prefer vertical truss.
Suprised you didn't say they look exactly like the Rockville totems. You gotta call like it is for an honest review.
Never seen or used them so I don't speak on it.
You never seen them? That is hard to believe. Rockville totems are solid and used by many.
Yep. I think the Rockville totems are about $100 cheaper for 2.
@@fumes1541 The fact that you guys think these companies pay me is hilarious. Half of the shit I get I have to return. I don't make shit off youtube.
5 minutes just to set up 1 truss?
That's about 20 minutes to do 4
Hence why I said I leave them assembled.
I hate the colorkey versions
I have them and they wobble to much. The novopro ones are much better.
The carrying bags are thicker
The colorkey ones ripped first time transporting them.
The issue is Novopro doesn't exist anymore. People in these comments sure are sweating the Rockville ones though. I have a feeling they're the same.
@@DJJoeBunn Novopro is still in business I got an email back from them saying they were.
Plus their website is still up and running.
Also called 3 pro audio stores I deal with and was told they are still in business
@@DJJoeBunn I reached out to novopro.
Got a very fast response.
They are in full swing.
They don’t have a distributor in the U.S
However they have distributors in Europe canada and can be bought from any reseller in the uk.
These are the Rockville totems. The exact same thing. You just pushing products you have been given products or paid to hype up the gear. DJS DO YOUR RESEARCH!
If they send me some, I'll make a video lol
I understand that.