HOW TO REPLACE A QUARTZ CLOCK MECHANISM
Vložit
- čas přidán 16. 01. 2023
- If you have a clock you like and the mechanism that runs it stops working, you can replace it yourself! This is a good DIY to learn! The trick is buying the right new quartz mechanism with the correct size shaft.
I learned a lot about buying the right piece to fit a clock I wanted to keep! I'll show you where I bought mine, how I chose the right type and size, how I took the old mechanism off of the clock, and how I put the new mechanism and the new hands on the clock.
~~~~~~~~~~~~~~~~~~~~~~~
Products shown or mentioned:
www.clockparts.com/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PLAYLIST FOR ALL OF THE "HOUSEHOLD TIPS" VIDEOS:
• HOUSEHOLD TIPS
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Camera - Canon EOS Rebel T6i w/EF-S 18-55 mm Lens*: bit.ly/1OAyBO1
Vanguard VEO Aluminum Tripod with Pan Head*: bit.ly/1nctWIT
IK Multimedia iRig HD Microphone*: bit.ly/1oNQ51D
Pop Filter with flat mount*: bit.ly/20hVT0p
Scissor Arm Microphone Suspension Boom*: bit.ly/1RCjjMs
Techsmith - Camtasia Editing Software*: bit.ly/1TJiYsf
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
you are a godsend!! A clock that hasn’t worked in months is suddenly working again!!
One of the best videos on CZcams.
Very instructive. I learnt somethings from you. Thanks and blessings on you!
Very helpful video, no one else made this kind of video
Thank you for this very thorough video on how to replace the clock mechanism. It's the best video out of many that I've seen.
Glad you showed this. My issue is opening an antique clock from behind, to reset the glass face back into place in a sessions clock.
Wow! Thank you! I am going to try. Your instructions were very clear
Such a valuable video! Thanks so much!
Thank you for educating. Very helpful! 👍🏻
Great job, really helpful 😊👍🏴
Very informative... now to go look for my unobtainium Seiko Moon Phase Movement.
You mentioned you didn’t like the little brass snug with black hands what you can do is remove it get a can of black spray paint spray the brass slug. Let it dry over night and install it back in the morning. I do this all the time I fix watches and clocks for a living.
I guess my amazon one wont work at all.
Is there a part to order that connects the hands to the movement?
It comes as one piece. Info is in the Description Box.
Fuck it. I'm just going to buy a new frickin' clock.
😂
Look for atomic daylight savings time too.
Can not contact this company
Why not? They have an entire webpage for contacting them: www.clockparts.com/technical-support-center/inquiry/
That's a lot of work when you can go buy a whole new insert for it thats one piece
I think we should discuss this over a glass of wine. You can buy so I won't feel uncomfortable.
Pig