Using a Thread Chaser to Fix a Cross Threaded Spark Plug
Vložit
- čas přidán 16. 03. 2021
- If you're like me and you goof once in a while, you might one-day cross thread a spark plug. Thankfully, if it's not TOO bad, you might be able to get away with this fix.
Affiliate Links:
Thread Chaser: amzn.to/3ty28kW
Inspection Camera: amzn.to/3cK7Hpo
Recommended Grease: amzn.to/3tz6Q1s
Motorcraft SP-578 Spark Plugs: amzn.to/30PgsJg
Motorcraft SP-542 Spark Plugs: amzn.to/30UxqGm
*****
Ways to support my channel
Shop on Amazon: amzn.to/32cgXhC
Become a Patron: www.patreon.com/treyspooner
*****
Follow on Facebook: truckstuff.trey
*****
Some of the links above are affiliate links which support this channel with your purchase at no additional cost to you. - Auta a dopravní prostředky
I did all 8 spark plugs on my Silverado last month & this topic NEVER crossed my mind lol. Now im paranoid over something for future projects lmao. Learning how to repair the issue should it ever arise beforehand 😅😂
Great video. My car has aluminum heads and I’m hoping I’ll be able to use the male/tap chaser to fix the messed up threads. My car doesn’t like the rocker arm noise, especially in the long term.
Nicely done.
It was a pain let me tell you
WHEW! thank you kind sir! did this to my girls truck the other day so i need to go get a Chaser. Any other tips before i attempt this? This is nightmare fuel for me...
Take it slow and steady. Do not use any more force than necessary. Hopefully the chaser goes down clean.
@@TruckStuff1 THANKS for the reply, really appreciate it. Its just the first thread or so thats bad, sooooo.. fingers crossed
Let me know how it goes! Good luck
@@TruckStuff1 Chaser wouldn't thread in... made it about a thread or so and it hits resistance... :(
Uh oh. What did you end up doing
I was working on my pitter and I was putting the plug in with my hand and it cross threaded I’m so pissed rn
Hope it works out for you. I feel you pain. I’m anti spark plugs. 6.7L for the win! ;)
I hear ya! All is good now, but just part of the process. Now that it's over with, I enjoyed getting to work on it and exercise my brain. But that's only because nothing went wrong.
What is that tool you are using for see it’s like a camera ?
It’s called a bore scope
Rookie mistake. When you are putting spark plugs back in, set your ratchet wrench to the side. Take the extension/spark plug socket and carefully put the spark plug in the hole. Turn the extension/spark plug "by hand" until you can no longer turn it with your hand and its properly seated. Now you place the ratchet back on the extension and tighten it only a 1/4 - 1/2 turn (see which is right for your car). and wallah done. It is IMPOSSIBLE to cross thread anything when you start a bolt by hand and only tighten with wrench when you are sure it is properly seated.
Yep! Lesson learned here!
i was excited and crossed 4 yes 4 lug nuts
Some things on a car, you physically can not start with your hand. You’ll have to use a socket (no extension or ratchet) to “start” the bolt, and this can cross thread by itself. I’ve done it once with an LS1 header bolt (exhaust manifold m8x1.25 bolt) and currently with an m14x1.5 tear end differential mount bolt.
I have a 2005 F150 with the 4.6 engine.
The motor has 250k miles on it. I've changed the plugs about 3 times since it came into my possession.
The last change over 18 months ago was really bad... the plug threads seemed really dirty from all the anti seize and dirt collection. I did my my best with an air compressor and got them seated. No problems with misfires or engine codes.
I'm dreading the next change this weekend. Planing on soaking with a bit of carb cleaning (per Ford) overnight. Then chasing the threads on all 8....
My question is what grease did you use going in?
Did you clean the grease off the threads before installing the plugs with anti seize?
I am very concerned about hydrolocking the motor with too many sprays of cleaner in the plug hole... but gonna try and blow them out dry with an air compressor.
Any tips or advice will be appreciated....
I used simple white lithium grease. I didn't clean it out after application. Ford recommends not using antiseize in these plugs (yours might be different since they're the 2 piece design). Also, you won't hydro lock it. It would take a LOT of spray cleaner. I used brake cleaner because it evaporates fast.
@@TruckStuff1 Thank you for the quick reply!
Definitely feeling more confident on this weekend's project.
Howd it go? In the same spot now .
How come you did not put an oil catch can on the driver side of the engine? Is it needed?
You can add one to both sides or add a "dual valve" can that hooks up to both sides. The passenger side offers more benefit than the driver side, so when people only do one, that's the side that they do.
Is it because the fresh air is pulled in on the driver side and exhausted out the passenger side?
From what I've read, the driver's side will catch oil under boost and the passenger side catches under vacuum. Since way more time is spent under vacuum it's more effective there
Awesome! Thanks! I finally received the answer Inwas looking for!
Bro. I wanted to know how well did it ran after that
Its been like 2 years and its running fine.
How did it turn out? Running better?
So much better! No misses or anything. Perfect!
Big question did it work??? Because you really didn’t show if it worked or not 🤷♂️
Sorry! Yes it worked great. I wouldn't post if it didn't, but yep it worked!