Holley Sniper Loose Injector Wire

Sdílet
Vložit
  • čas přidán 6. 07. 2022
  • A loose injector wire on the Holley Sniper was causing the SBC to stumble on acceleration. Here is how to easily identify and fix the problem.

Komentáře • 14

  • @spades262
    @spades262 Před měsícem

    Awesome can't wait to try when the sun comes up

  • @angussutherland4401
    @angussutherland4401 Před rokem +1

    Thank you very much - I had the same problem and doing what you did fixed it.

  • @1godgodgodgodgod
    @1godgodgodgodgod Před 9 měsíci

    oh jesus. i tore my mortor apart until i looked in the efi and seen one not running. Thank you my savior lol!

  • @davependleton5080
    @davependleton5080 Před rokem

    Thank you I’m trying it out now to see if that’s my problem

  • @arizonarider6998
    @arizonarider6998 Před 10 měsíci

    Thanks !!!!!!

  • @bruceyoung5792
    @bruceyoung5792 Před rokem +1

    I had one dead injector and found that both pins in the connector had bent over. Very cheap and crappy connectors. Bend the pins straight and very carefully plug it in.

  • @rxtasy3
    @rxtasy3 Před rokem +1

    is holley not aware of this issue? been seeing many people with this same thing.

  • @highrzr
    @highrzr Před rokem

    If I go with the Sniper, I'll have to keep this in mind. You got some serious carbon building up on the venturis.

    • @edshandymantips4862
      @edshandymantips4862  Před rokem

      Yes, I believe running with the bad injector caused the carbon. Since fixed it has been running clean.

  • @jesstaylor3200
    @jesstaylor3200 Před rokem

    I have a 2x4 Super sniper kit. I took it apart to check my connectors and like an idiot never kept track of which wire plugged into which injector. Does it matter?

    • @edshandymantips4862
      @edshandymantips4862  Před rokem

      Sounds like a nice setup! Two injectors and two corresponding plugs behind each cover right? I would think the plugs closest to the injector? It’s been a while so maybe I’m missing something. . .

    • @jesstaylor3200
      @jesstaylor3200 Před rokem

      @@edshandymantips4862 Yes 2 plugs 2 injectors for each side. But the wires are all the same length just different colors.

    • @edshandymantips4862
      @edshandymantips4862  Před rokem

      @@jesstaylor3200got it. Not sure if it matters but best to be safe. I saw an image online with the white/gray pair on the side with the fuel line (rear on mine) and the orange/white pair on the non fuel line side (front on mine). My video also has these same color pair in the same location. Hope this helps.