Andonstar AD407 Pro HDMI UHD Digital Microscope Review SMD Soldering test & compare to my Trinocular
Vložit
- čas přidán 23. 10. 2022
- Andonstar sent me one of their AD407 Pro UHD Digital Microscopes and invited me to make a honest review video. The microscope has a built in 7" screen, can capture images or record video to a SD card and output 1080p at 60fps to a monitor or TV. In this video I take a look at the microscope and use it to do some actual SMD soldering, I normally use a Trinocular Optical microscope so how does it compare?
Buy the AD407 Pro at Amazon and AliExpress (I receive a small commission from sales)
s.click.aliexpress.com/e/_DBX...
amzn.to/3f00dnu
amzn.to/3TLGhDu
The following links are affiliated. This means I get a small commission from any sales but you pay the normal buy price. This way you can help support the LER channel at no extra expense to yourself.
Learn Electronics Repair is now on Discord! Come and join the fun, it's free.
/ discord
It takes a lot of time and effort to make CZcams videos. If you enjoy my videos or they helped you with your own repairs please consider subscribing to my channel or click LIKE
If you would like to help support this channel you could consider sending a Paypal donation or subscribing to my Patreon page. If you subscribe to my Patreon you'll get my Whatsapp number and I'll give personal repair support
You can send donations via this link
www.paypal.com/paypalme/youtu...
You can subscribe via this link
/ learnelectronicsrepair
Affiliate Links
For All Your PCB needs: free $5 discount coupon
www.pcbway.com/setinvite.aspx...
Test meters
KM601
s.click.aliexpress.com/e/_DEq...
amzn.to/3PnMLa3
AN8008
uk.banggood.com/custlink/vKKy...
amzn.to/3zoBhxu
VC480C+
s.click.aliexpress.com/e/_DdY...
amzn.to/3ohpjPN
MESR-100 ESR METER
amzn.to/3zoZOCx
amzn.to/3PDyw0c
XC6013L CAPACITOR METER
s.click.aliexpress.com/e/_Dm1...
uk.banggood.com/custlink/G3GY...
amzn.to/3aVbTG1
amzn.to/3yULK20
TM-902C TEMPERATURE METER
amzn.to/3cv7J8m
amzn.to/3v5kuwK
NEEDLE PROBES
uk.banggood.com/custlink/DGKY...
amzn.to/3Pqod00
amzn.to/3aQBHmQ
FNIRSI-138 PRO SCOPE
s.click.aliexpress.com/e/_Dmc...
DCA55
amzn.to/3zlmALm
LCR-T4
s.click.aliexpress.com/e/_De0...
uk.banggood.com/custlink/KKKy...
amzn.to/3ITNr4e
amzn.to/3PFDMk4
Soldering
T12 with M8 9501
s.click.aliexpress.com/e/_DFh...
amzn.to/3zn0GaF
KSGER T12
uk.banggood.com/custlink/vGvY...
amzn.to/3OoaOUM
T12 M8 9501 HANDLE
s.click.aliexpress.com/e/_DlK...
T12-BC3
s.click.aliexpress.com/e/_DDU...
amzn.to/3csd1kQ
amzn.to/3PKC0hw
T12- BC2
s.click.aliexpress.com/e/_Del...
amzn.to/3aQCXX6
amzn.to/3IVfH6K
T12-BCM2
s.click.aliexpress.com/e/_Dmd...
amzn.to/3Baz0qK
amzn.to/3b1T7wy
T12-D12
s.click.aliexpress.com/e/_DD3...
amzn.to/3v3S6Lc
T12-D16
s.click.aliexpress.com/e/_DF6...
amzn.to/3yPmava
T12 KIT
amzn.to/3cvs1i3
QUICK 861DW
s.click.aliexpress.com/e/_DCZ...
uk.banggood.com/custlink/33vh...
amzn.to/3Prljbf
amzn.to/3cxrETR
PROS'KIT SS-331H
uk.banggood.com/custlink/Dm3R...
amzn.to/3zoKk1q
SS-331H REPLACEMENT GUN
s.click.aliexpress.com/e/_Dcy...
KADA 853B PREHEATER
amzn.to/3S32H3h
LY G720 BGA REWORK
s.click.aliexpress.com/e/_Dna...
MHP30 HOTPLATE
amzn.to/3zniQci
amzn.to/3zkBscS
ESD-11 TWEEZERS
s.click.aliexpress.com/e/_DEH...
amzn.to/3zmCS6L
amzn.to/3Pl7zyK
Magnification
MICROSCOPE
s.click.aliexpress.com/e/_DmW...
uk.banggood.com/custlink/mKGy...
amzn.to/3cvujxF
amzn.to/3v0c3mn
EEPROM Programming
TL866 II+
amzn.to/3aXWchh
amzn.to/3ckesBK
CH341A
s.click.aliexpress.com/e/_DeR...
amzn.to/3B8N4kM
amzn.to/3PHXueX
1.8V ADAPTER
s.click.aliexpress.com/e/_Dci...
amzn.to/3aS6vU0
amzn.to/3PGVp31
Consumables
NC-559-ASM FLUX
s.click.aliexpress.com/e/_DFO...
amzn.to/3B3lGod
amzn.to/3BnrPvJ
DESOLDER BRAID
s.click.aliexpress.com/e/_Dns...
amzn.to/3ROBHEq
amzn.to/3RQ9gWM
10 PACK SOLDER WICK (I use SIze 4 SW18045)
s.click.aliexpress.com/e/_Dk7...
Thank you for your support.
Richard
Im so glad you did a review of this microscope. Ive been considering it for a couple of years now, but Ive never seen any decent video's on its use for electronics. Thanks!
Your Welcome
Really enjoyed that review, i use a Adonstar for over 2 Years now and i am really happy with it! I built my own stand for it, becuase the original wouldnt fit big Mainboards, and also added LED ring to the Microscope. Also its hooked up to a TV, because my early Version that i am using had a tini tiny screen. But i cant belive how much the prices went up, i bought mine for 100$ including shipping to germany.
I have a very similar appearing microscope and you can tilt the upright post away from you so that you can have unobstructed access to your work for soldering etc. I did note that the hinge at the bottom was rather stiff and I had to use a bit or force to tilt it back but it was very useful to do that.
Thanks again for your work making, editing and posting these videos; I very much enjoy them!
i just loved watching you wrestle that capacitor with your chunky soldering tip :)
I purchased this microscope based on this video, and can confirm it is as good as presented here. I plugged it into a 65" screen and it is every bit as sharp as it is on the small screen. I got this microscope as it is a lot smaller on the bench than a full sized optical microscope, so suits my needs at the moment.
From what I’ve seen in other Andonstar videos there is a location above the red ring on the camera focusing portion of the microscope . That spot is the same type of location used for the camera locking area . It is below the focusing turning mechanism and above the lens screw in area . That will add the length of the microscope to the height of the working area . There was another CZcamsr that took the unit in it’s battery running format and brought it outside . Then took some photographs down the street to show that it is capable of even longer range . Hope this helps you and your viewers . Very thorough review . New subscriber
Novice watchmaker here. Thank you for this video. I will save up to try the version I found on Amazon with an even higher focus point that allows for even more room for my watchmaking tools. While not currently in my budget, I can save toward buying one. The other options I've seen require more room and money than I have. Thanks again!
I have the same one but with a larger screen, you can put it much higher by using the end piece if the microscope, giving you much more room to work. I can’t fault it and use a Cartier bag over it to avoid dust. Before you buy one keep a check on prices, as they go up and down very quick.
27:19 - Those microscopes have strong Led lights, which are not diffused, therefore provide strong glares. Once you use diffused anti-glare light, even more details will be visible.
Heya yes the piture is very clear and the zoom is olso great but I like to see more dept like the optical microscoop gives
Great review...cheers.
I must say that Andonstar has a real good magnification with still a clear picture. I am sure Andy Handy from the mobile phone repair close to you would want one.
I have this same microscope. The picture quality and color is very good.
Many Thanks
Just wondering if you measured the field of view(like a whole micro processor chip)from maximum distance?
For viewing the centre of an ATX mainboard can you not extend the boom arm by way of the lock screw on top at 5:54?
Hi guys, I posted a DYI Mod/hack of the AD407 on the LER Discord. It is possible to mount it on a LCD monitor arm and have a much larger working area. (even for a desktop board)
as stated before you can get different stands for it
I have mine mounted to a monitor boom and using a Barlow lens. Very nice setup for the price. No limitation on the size of board you can look at.
I did try it 1m above my bench alongside my overhead video camera and it worked really well and gave great magnification even at that ditance - I think I may mount it there as an aid to recording YT videos. I will be keeping my Trinocular Amscope clone though 😉😉
@@LearnElectronicsRepair hey bro i have gpu i would like to send to u for repair. the issue with it is, whenever i tried to install driver the card would crash an sometimes it don't post at all... please respond thank
@@drakydawkins1098 email me electronicanaria@outlook.com
Question is the Barlow lens a standard size and does that provide a larger viewing area?
@@LearnElectronicsRepair ok thanks for responding i sent u an email..
You can also clamp it down the bottom edge under the focus ring, this is best for soldering as you have more adjustment and the scopes not in the way as much
I did get it at 14.5 inches working distance clamped as I did it, which is better than my optical microscope 6 inches - but your suggestion would give a little less magnification which would be good. I also tried it 1m above my bench alongside my YT recording camera - it works very well there too
@@LearnElectronicsRepair hey bro i have gpu i would like to send to u for repair. the issue with it is, whenever i tried to install driver the card would crash an sometimes it don't post at all... please respond thank
Doesn’t the post swivel backward to change the angle of the scope?
I think the axis of the microscope can be tilted if it is unsrewed a bit with plier, so you have a better range for optical field to ATX boards
Yeah I read that afterwards. Its also fairly simple to mount it above the bench, I just wanted to point out it is not a major problem to do something like that but you do have to do a little work to implement it.
@@LearnElectronicsRepair hey bro i have gpu i would like to send to u for repair. the issue with it is, whenever i tried to install driver the card would crash an sometimes it don't post at all... please respond thank
Hi
Did you extend the arm towards you to get better depth on the mother board ?
No actually I didn't try that - it does tilt so you can do that
Cool . interesting
Hi Richard, isn't that a boom arm so that you can bring the whole microscope forward? Clearly visible at 14:04
Yeah you can tilt it but I would suggest a modified mount to use with large PCB such as ATX
I have bought the AD407 in February. From its specifications in the manual, the model you tested (AD407 Pro) seems to be identical to mine EXCEPT for the length of the shaft (12.5 instead 7 in) and the size of the base. Since with the old holder it was almost impossible to work and solder, I (among other users) have repeatedly asked Andonstar to provide the anyway excellent microscope with a longer support shaft, and their engineers eventually agreed, releasing the Pro version . Hopefully they will sell, on request the owners of AD407 "vanilla" with the new stand system.
Why not a high pixel digital Sony camera can I hack it to become a microscope for electronics repair purposes?
I wish you make DIY on a microscope . any possibility? Thanks
Will this microscope work in 3 or 4 years? Perhaps. For sure my simple analogue Amscope Se400-z for 160€ (including shipping) will.
As an occasional lurker and not someone who does repairs. I can't shake off what he said about depth perception and binocular microscopes in his GPU repair video compared to these USB microscopes. I bet it feels way more natural with the one you have?
Impressive, seems to beat my vintage dynascope. The bracket looks odd, the lens seems too far forward compared with the site photos, I see some have cantilevered rear arms. Can you zoom using the buttons on the LCD? Dare I say it, use blu tak to secure small PCBs.
This is the larger 'Pro' stand - you can tilt the angle of the supporting pole too.
@@LearnElectronicsRepair hey bro i have gpu i would like to send to u for repair. the issue with it is, whenever i tried to install driver the card would crash an sometimes it don't post at all... please respond thank
@Mr Guru Nahh I wouldn't do that - I may charge him extra though 😉
hey bro i have gpu i would like to send to u for repair. the issue with it is, whenever i tried to install driver the card would crash an sometimes it don't post at all... please respond thank
40:45 doesn't the tapping actually move the pcb more than the microscope itself?
Quite possibly
In an engineering environment I would use it on a pcb coming in from a vendor/contractor if I noticed a problem on the board. I would use it make a photo of the problem area, save the photo then in a graphics program highlight the area and add required text i.e. what's wrong, rev of pcb, date etc.
That photo would be sent to QC mgr. from there it would go to the contractor to be aware of the problem.
I personally would not use this product to do any soldering instead I would use a quality Luxo magnifying lamp.
Everyone has there own preferred way of working. For soldering I will continue to use my optical microscope (Amscope clone) as it has stereoscopic vision for full depth perception, but I was pleasantly surprised by how well I could solder with the AD407. I think I was very fair in the summing up - both have their advantages and disadvantages and it is a pleasure to be able to use both microscopes and give (I believe) a very honest opinion on them 🙂
@@LearnElectronicsRepair hey bro i have gpu i would like to send to u for repair. the issue with it is, whenever i tried to install driver the card would crash an sometimes it don't post at all... please respond thank
I finally ended up buying something similar. Mine doesn't have the built in display but I'm connecting it to a TV or monitor anyway. It was a difficult choice with all the options on Amazon but I spent a lot of time reading the reviews and hope that I made the correct choice. I can't afford something like this but if I can start making money on repairs, this might be on the work surface down the road.
good luck with the repairs 👍
I wanna buy that kind of thing before. But still havent decide, cause i broke. Lol
They became two😂
"Or it escaped, YEAH!"
Nice, but if you just need a microscope for soldering and no need for recording video you're way better off with an optical stereo microscope. You lose all perception of depth on a flat screen and that's more important than a lot of people might think.
One variable which makes depth perception possible is lighting. You can compensate a lot for not having an optical micro by positioning your light sources appropriately. This requires some practice, but it is not any hard to achieve practical depth perception on the monitor.
"BEE IN MY BONNET"😅
Buy document camera for half the price and have 12MP instead of 4MP. for 300Eur 4MP is very very very very bad in 2022.
they're 200+ quid and you got one for free? someone has friends in high places.
That's some hairy fingers
:)
You cheated! You did not used the 7" display to work with the SMD capacitor. No way you could be that accurate watching the 7" screen.
Be nice if people sent me something for free
Nothing is free, Richard has been releasing videos for a while now, so its completely reasonable that he be rewarded for all that work.
Tooooo Lengthy vid, boring to watch.
hey bro i have gpu i would like to send to u for repair. the issue with it is, whenever i tried to install driver the card would crash an sometimes it don't post at all... please respond thank
hey bro i have gpu i would like to send to u for repair. the issue with it is, whenever i tried to install driver the card would crash an sometimes it don't post at all... please respond thank
hey bro i have gpu i would like to send to u for repair. the issue with it is, whenever i tried to install driver the card would crash an sometimes it don't post at all... please respond thank
hey bro i have gpu i would like to send to u for repair. the issue with it is, whenever i tried to install driver the card would crash an sometimes it don't post at all... please respond thank
hey bro i have gpu i would like to send to u for repair. the issue with it is, whenever i tried to install driver the card would crash an sometimes it don't post at all... please respond thank!!!!!!!!!!!!