The ULTIMATE Tuning Guide for High Power PCPs (Impact & Maverick)
Vložit
- čas přidán 25. 07. 2024
- 0:00 - Intro
3:25 - 1) LET’S CLARIFY A FEW THINGS
3:39 - 1.1) High Power vs. High Muzzle Energy
4:10 - 1.2) Why Slugs?
5:30 - 1.3) Calibers - Why is smaller better?
6:58 - 2) ANATOMY OF PARTS
7:43 - 2.1) Air Storage & Regulator
8:22 - 2.2) Plenum
9:30 - 2.3) Hammer, Spring & Valve
11:54 - 2.4) High Power Parts and what they do
13:51 - 2.5) Valve Return Spring
15:12 - 2.6) Ports & Probes
18:40 - 3) TUNING GUIDE
18:50 - 3.1) What Setup do you Need?
20:34 - 3.2) What velocity can you push to?
21:57 - 3.3) Tuning Procedure Begins!
22:45 - 3.4) Lower Reg & Spring Settings
24:19 - 3.5) Start Increasing Reg & Spring
25:00 - 3.6) Balancing the Hammer to the Reg
27:00 - 3.7) Reaching the “Peak”
29:20 - 3.8) Reaching your “Ballpark Velocity”
29:50 - 3.9) Test on Paper using Hammer Wheel
33:25 - 3.10) Fine Tune!
36:00 - 4) TIPS & TRICKS
36:20 - 4.1) Tuning with Short Barrels
39:08 - 4.2) Higher Pressures for HP Guns
40:42 - 4.3) Use High-Flow Parts!
41:52 - 4.4) Barrel Cleaning
43:35 - 4.5) Barrel Harmonics
48:19 - 4.6) Hold Sensitivity
50:00 - 4.7) Aftermarket Parts
51:16 - 5) CHOOSING A SLUG
53:07 - 5.1) What purpose is your slug fulfilling?
54:03 - 5.2) Slug Designs
55:15 - 5.3) BC vs Weight
55:54 - 5.4) Slugs for Target Shooting
56:20 - 5.5) Don’t Give Up!
57:40 - Closing Statements
Matt Dubber Slugger Video: • Matt Dubber + Utah Air...
Order Matt Dubber Slugger: utahairguns.com/fx-impact-mki...
Patriot Javelin Slugs: patriot-slugs.com
AB101 - How a PCP Works: • How a PCP Airgun Works...
AB101 - Recoil Dynamics & Harmonics: • Recoil Dynamics & Harm... - Zábava
Order Matt Dubber Slugger: utahairguns.com/fx-impact-mkii-matt-dubber-slugger-edition
Patriot Javelin Slugs: patriot-slugs.com
Nice review ❤️🥀
Matt your the man!!!!!
I'm in Taiwan, can I buy this gun?
Nice video
What kind of lube you use or what is your way?
Do you wash your sluds then lube them and what is the lube?
THE HOLY GRAIL!!!
Just want to throw this in... it's nice to see an actual intelligent human sharing real information. The more I watch your videos the more I appreciate your content. Thank you! If you visit GA USA I've got a place for you to chill and shoot. Only 10 acres but lots of area to shoot. Cheers mate
Thanks Matt, I'm new to the Impact and have been struggling to fine tune my Sniper for slugs. This is the first time I have watched a video that clearly explains the process and more importantly how the tuning process works. Please keep educating us.
Wow! That's a lot to digest. Gonna have to watch this a few times.
Thanks so much for taking the time to put this together so we have such a good reference to refer to!!
Keep shooting!!
Loved that video. Really appreciate the informative videos and actually like the longer videos as they are more entertaining than most crap on tv. Thanx for the great info cheers
Outstanding video Matt. Well done! Great info here. It was worth watching every second of this one.
Matt, great video. yup, would liked to have seen this sooner, but lots of info, all relevant. breaking down the different parts of video on the timeline was a great idea, makes it easy to go back over stuff i forgot, missed or want to quickly refresh on. well done
Hi Matt,
No tutorial from yourself can be to long, the more information you give us, the easier will be for us. Thank you so much for taking the time.
wow this video taught me SO much.... i just ordered my first FX Airgun, a Maverick Compact in .22 and this video teaches everything you need to know. I watch your videos since a few weeks, since i am into airgunning, but this masterpiece got you my subscription. Top.
Awesome video mate thanks for taking the time to help everyone with the tuning and understanding of how the fx airguns work.
THANK YOU MATT! You’ve just answered my theory @37:25. Love your work and the fact you share your experiences. We appreciate what you do. Mahalo Matt🍍👏🏼👏🏼👏🏼👏🏼🍍🤙🏽🤙🏽
The best video I have seen to get the most out of the FX Impact - Maverick, very well explained. I have quite a bit of knowledge of this rifle, but I learned a lot of new things from this video. I have my impact .30 power plenum with an extra external plenum modifying a total of 113cc of plenum, valve housing, kit the potentia of the .35 pin probe harder spring, modified dual transfer port, and huma regulator, it was giving me 1030 fps with NSA 65g, after watching the video I have increased the throttle pressure by lowering the speed to 1005 fps and it has improved the precision remarkably. Thanks.
Matt, you are one of the best friends of literally every shooter. Best Regards
Appreciate this very much. Great information and should be most helpful. One of the best parts of this hobby/sport is the open sharing of valuable information to others to allow their success if they are willing to do the effort.
Huge thank you Matt for sharing your knowledge and experience. Makes me wish I was back in Zim so I could hang out with you sometime. Currently waiting for my first FX to arrive. I opted for the Maverick. Can’t wait to put your tuning guid into practice! You’re awesome.
Excellent, excellent video Matt. Very educational. I don't own, or shoot, a high power PCP. I have a Gamo Urban PCP that I use for pesting sparrows and starlings from my bluebird nesting boxes at 25-35 yards. I could never afford the high end PCPs and accessories that you use in your videos. I did watch the entire video though, and found it most interesting. You truly are an expert in this area for sure. Thanks for taking the time and effort to make this video. I did enjoy watching it. 👍👍👍
Geo from Kazoo, MI USA
Absolutely outstanding video! Enough to get anyone started learning and tuning. Well done, thank you for sharing.
Superb video Matt. Tuned my .25 700 superior heavy with PP, SPK and huma transfer port to shoot h&n 34 grn .249 at 950 fps. 1 shot at 100 yards and bird down.
Thanks for the video Matt. Just received my Impact a few weeks ago after the long wait. Can’t get javelins at the moment so Utah AG tuned it to the Nielsen 31.2. Out of the box it’s a laser at 100 yards! Looking forward to trying the 34 or 40 when we can get them again. Love the gun! Nice work!
My new tuning bible 😃
Thanks for taking the time to make this video Matt!
Excellent video Matt keep up the good work I learned a lot about tuning my Impact rifle.
Geez Matt this video has so much info im watching it again and again
Thank you! I'm new to Airguns and just ordered and M3 impact. This was very well explained from all aspects.
I love the video, am new in high power Airguns and my first one is a panthera 700, I had so many questions before this video but now is all set! Thanks a lot for your help! Greetings from Mexico 🇲🇽🌮
Got a 25 cal Maverick Sniper ordered. Can't wait to start shooting some slugs. Thank You for the great information.
Thanks Matt, there is so much intuition involved with tuning these air guns especially the Impact. I wish someone would make an animated video of clearly showing what is going on in the inside the gun from the tank to the end of the barrel. To hear a veteran every day shooter like Matt talk about the harmonics and listening to sound is daunting for a newbie like me. I have a Mark ii that I need to turn up for heavier slugs. At least three variables have to be harmonized. to get it to shoot satisfactory. I'll have to get my hands dirty...or send it to Ernest. Lol
Wow! this is like an encyclopedia of FX power tuning! Thank you Matt! I am enormously appreciative of your willingness to share with the community this wealth of hard to come by information, which is the practical outcome of many years you spent experimenting and observing. Thanks, mate!
Great stuff I don't know how many people I tryed to get to watch your videos ab101 this video is all an one fantastic. That take a lot of work. That barrel is awesome. You don't know how much this helps. I just want to say thank you 👍✌️👌💯🎯
Thanks Matt! Very informative, and will definitely help me chose my next airgun and ammo.
Thank you for all the informative videos. They help so many of us.
Start to finish... Brilliant!
I've struggled tuning slugs since i installed the pp. like you said with the light spring the valve adj.almost has no affect and that was how i fine tuned before. i was just heading out to tune when i saw your video. i turned back the fine hmr adj screw and worked it and the reg up to my target speed on hmr #3. so here's where things get interesting. i shot from #1 to max hmr and the groups were nothing to brag about. my best was 1/2 inch at 40 yrds. i was just about to start messing with reg and fine hmr when it hit me the a to e side of the hammer i never used. I started on C with the same result. then i hit the money with the B setting. it went from 1/2 inch on C to 4 shots in one hole at 40 yrds on B. it must have been just enough to hit the right node because the fps didn't really change. thanks for the advise and i hope this helps anyone else thats having a hard time. it might not work on every gun but its worth giving it a try.
I feel ya man, I threw every available upgrade to my impact X . I could get 975fps with a .217 jsb knockout out of a 700mm at 150reg. The gun wasn't happy , HS was on max with no more adjustment. On my new mk2 there is more power. I swapped my barrel and probe to the new gun and I get 985fps with the same slug on setting 3, 150bar, with plenty of adjustment left on my HS. FX must have done a few less obvious improvements between models. My experience is with 25.39gn slugs.. Matt's custom gun numbers are with a 34gn . Good luck
Thank you so much for sharing this, and all the other, informative video! Its nice knowing that I have a reliable source of information that I can turn to. Purchased my first pcp a couple months ago, an Impact mk II .30 and I would be so lost if it wasn't for you. You help me keep my head above water. I live in Florida and with the temps rising fast here I realize I quickly need to find a way to dry the the air I am putting into my Impact from my small compressor. Do have a economical way to effectively achieve water removal. Thanks in advance.
Matt you are the man I just ordered everything to upgrade my impact and I'm moving to .22 instead of 25
thanks so much matt for sharing so much knowledge with all of us. you my friend are a genius
Nice,I think you got me hooked! I like high power and accuracy so and I like to tinker so perfect!
Thank you very much for this updated info. This worked on my stock Crown too.
Really good video and it was a lot of help to me especially on the tuning side
Great video, content clear and precise 👍
Excellent Matt many thanks very informative
Hi great show, when I eventually get my first PCP a wild cat sniper, what I have picked up from your show will help greatly. The huben was my first choice however it seams they will never be available in Australia, the fx is taking 3 to 4 months. I also ordered a 30 cal kit , there were mumblings of end of year or 2022 . We live in a strange time of high speed data and courier snails ! Cheers
your a great man matt for all your work you put in to your testing and video work ,watched you for ages im in the prosses of adding an impact m3 .25 cal fac to my fac licence as we speak just cant wait to get out test and tuning it and start shooting rabbits on our permission
Thanks Matt! Great info and good timing! This spring I want to try 25 grain slugs in my Impact - I'm hoping that I can shoot JSB Redesigns and slugs with same tune. With any luck, JSB will come out with a Hades Redesign pellet for mid range (75 - 100 yard) hunting.
Thanks Matt. A great video and excellent information. 👍
Amasing quality info and lots of tips. Thank you!
What a wealth of usable information this gentlemen from downunder has provided here. Anyone reading this should make the time to watch this whole episode, you may just learn something. Cheers mate......from Philly Pennsylvania, the former united states of America
This guy isn’t from down under, he’s got a very strong South African accent - nothing like an Aussie accent.
Very nicely done, lots of good information,
Started watching this video but realized I'm getting ahead of myself if my pre-order isn't going to get here for months to come! GRRRRRR!!
gracias Matt por compartir tus conocimientos ,exelente video, saludos de Mendoza .Argentina
The video I been waiting for!! Dankie👍👍
hi sir i'm from the philippines I'm one of your fans especially when it comes to airguns. Talking about airguns, I'm following your blog on toutube
Awsome video. Really informative but to the point. Very helpful regardless of level of knowledge
Thanks for talking about barrel harmonics and mentioning that even you have to contend with hold sensitivity. All this time... I've been wishing for an Impact because my cheapo bullpup is hold sensitive 😔. Knowing that its par for the course is good know. I watch you guys make these incredible shots so easily that I think often times we think it's just the high end gear.
Its only really the very high power setups that are hold sensitive, standard power is way more forgiving
@@AirArmsHuntingSA ... Thanks for the clarification. I'll tell my wife that Matt Dubber confirms that my gun is not up to par and I need an Impact!
As always great video with alot of informations
Greetings from Chile! It was a Master Class...Many Thanks
Thanks it is becoming very clear to me now
Really helpful information in this version of matts for the fx mk2 impact tuning thanks
Thanks for all the information I appreciate you for sharing your knowledge
I bet the fx owners will love the time and effort you took to do this well done .Now Matt i know you are an fx man but i want to see what you make of the engineering materpiece that is the Leshiy 2 no hammer/spring ect ect .
wish we were Neighbors so you could help me out lol 😆 with my 25 cal 700mm thanks Matt 😊 I've watched this video like 6 times already so I can test this weekend
Thanks Matt great informational video
Brilliant tutorial, thanks for sharing.
Excellent video extremely informative thank you
Awesome just what I was looking for.
Thanks for this great and very educational video.
Thank you for the info Matt, very helpful
Back to watching this again, going on 2 years trying to get my m3 to shoot slugs with no success lol I’ve never got better than 1” groups at 50. Shoots the wings off a fly with pellets but I wanted to shoot slugs haha back to learning from the basics I must have missed something.
Great info Matt, Thanks!
This is the video Iv waited for for years
Wow..amazing..so perfect shot..👍
A great video and loads of information. At some time I would love you to do a similar video for shooting pests (rats, pigeons and sparrows) inside barns and other structures where slugs seem likely to do some damage to the structures. From your great hunting videos, the slugs at the velocities and ranges you are shooting still seem to have plenty of energy after passing through a dassie.
Awesome 👌 I'll try out these tricks tomorrow with my compact maverick. It's been really frustrating but again I'm just learning and doing the opposite of what you said. I can let you know if it works if any one cares that is
Waited for quite some time for the video
Wow, it’s a beast, what a gun, to infinity and beyond ! Tom LI NY
Loved tha vídeo! I´m from Portugal and i have the FX Impact M3 Sniper .22. Best regards Matt!
Awesome video Matt! Hello from Canada and quit squeezing your bag so much eh!
Thank you so much. Great information.
I know it's off the subject but as you're involved with the Element scopes please seriously consider that many shooters use different projectiles through the same rifle. The elevation turret cap is a relatively cheap item and I believe many shooters would love to be able to buy them separately. With these we would not have to redo the distance "tape", just simply change the cap. Perhaps extra caps could be included in the scope box on purchase. Choosing between 2 similar priced and quality scopes I think many shooters would choose the one with extra caps.
Always value your technical videos. Most of what Ive learned has come from them and this one is very usefull. thankyou
We’re working on it!👌🏻
That higher reg pressure for a shorter barrel makes sense. The projectile needs a bigger kick at the start of its travel to get it up to speed over a shorter distance.
Köszönöm ! Szuper videó!👌
Exellent information. Thanks man.
Great Job Buddy!
Awesome video! Tons of great info. I love my stainless steel barrel housing. What a difference it makes. Can't wait to try the Javelin slugs!
Great video!!!
vidéo très convaincante merci pour se cour de precison c est très enrichissant pour moi un papy qui début avec sa FX k2 merci l ami un papy de Normandie qui a kiffé !!
Matt great video! I am so glad you brought up "barrel harmonics" it has been lost in the usual forums because everyone is getting it confused with "harmonic tuning". On that note, in the video you mention hold sensitivity (which can influence barrel harmonics) and barrel sleeves.. Does your gun in this video have a barrel stiffener installed? Does FX plan to move from barrel compression to tensioning ?
Great video👍, I would like to have a diagram made by you with the various calibrations of the regulator / swing mass etc..etc .. for each type of slug / pellet with its own specific weights in order to verify correct functioning on the Impact..Thx Matt🍻
Great video ! I have been running with the slug power kit in my impact x powerplenum 22 for some months and this video was a game changer. Tried your tuning method today and It looks very promising. The only thing I wish to have more information on is how too tune for lighter slugs like 25 gr with the slug power kit. Thank you
To be honest, I think you may be better off with the standard power Impact if you’re using 25gr slugs as that’s very light for a 700mm barrel... 600mm barrel though, it may be a great setup. You will still get the 700 to work well but mayne not as well as if you had the standard hammer and standard valve return spring.
@@AirArmsHuntingSA Thank you for the reply. I was thinking maybe a bit lower reg like 150 might work with the 25 grains . But it might be to low for the slug power kit? I also have 600 mm barrel so I might swap. Thank you . Continue the good work
ผมฟังคุณไม่ค่อยเข้าใจ แต่ผมชอบที่คุณบรรยายครับ 👍
Can you please make a video or just share information about the potential of maverick for shooting both, pellets and slugs with just changing the power wheel and stock hammer and pellet probe. How precise can maverick be with the two ammos and what is the power level that can be achieved without losing accuracy. I think most of the viewers will be interested in this and for me it is the deciding factor to buy the maverick or not.
Great video 👍
Brilliant video thanks 😊
Great job Matt. I do have .22 CAL Maverick Sniper on order form UA. This just confirmed I picked the right cal. Now if it ever gets here.
I am big fan of you brother
May Good bless you bro 🖤🖤
great info, thanks for sharing.
Great Matt and good detail. Super if soon you can share setting on the M3.
BTW what is the shoulder part with the picatinny rest???
great video , I learned a lot., be safe
Matt thank you very much!!! This is by far one of the best videos for real tuning FX M3 riffle!!! Question: Once you have tuned for one specific weight and velocity pellet (18.3 gr, 880fps), Do you have to tune again for a different pellet weight and velocity? Or, You can get the desired velocity moving macrowheel?
I would love to see more tuning in a .22 hybrid w/ standard impact MKII.
Awesome content Matt, big help in tuning my 50ft/lb Impact. Any chance of you doing a Crown mk1 or mk2 tuning guide?