Video není dostupné.
Omlouváme se.
HIKVISION DS-KV8113-WME1 control open 2 Lock, no need access module DS-K2M080 / DS-K2M060
Vložit
- čas přidán 11. 06. 2021
- www.aliexpress...
www.aliexpress...
DS-KV8113-WME1 DS-KV8213-WME1 DS-KV8413-WME1 with 2 relays (NO*2 , NC*2), can unlock the second lock directly, no need yse Access module DS-K2M080 / DS-K2M060
To enable the 2nd relay, in the Door Station config go to Intercom -> I/O Settings : I/O Output : Output2 change to Electric Lock
Hello. Would you be able to check if input 1 (door contact) is doing anything on your outdoor station? Thanks
Plz show the connection of the intercom and the doorlock
We already tried the same model, but it's not working ..?
Hi
I have ds-kv8113-wme and I would like to know how to connect the intercom with a push button and an electric strike
Best regards
show which settings on the DS-KV8113-WME1??? For open 2 lock. Thx
hello . how to setup to show 2 icon no1 and no2 on app?
Hello, which voltage is provided to the lock from the main station?
Hello Bruno, do you already know the answer to your question?
@@radosawzaczyk570 not yet.. I still didn’t buy it. Waiting for the new Android monitor
great but... HOW
THE DOOR2 IS NOT IN THE FIRMWARE !
You need to setup in configuration software
@@doylik1 how to setup my friend
I also would like to know how to add second lock to my 8113. I have no indoor monitor, I only use app.
I need second lock to controll the gate.
config via web > Intercom > I/O Settings > I/O Output No Output2 > Output Electric Lock (in default disabled)